VOS3000 v2.1.7.03 | Quality Edition

We offer VOS3000 V2.1.7.03 Softswitch hosted package with excellent performance server and service.

OUR AVAILABLE VERSIONS FOR RENTAL & ONETIME INSTALLATION -Kunshi Network

vos-2.1.7.03 server rent Features

VOS3000 V2.1.7.0 VERSIONS FEATURES | V7.0

Offers Dedicated Server, start VoIP server,Vos3000 server rent, Vos3000 Soft switch, Dedicated VoIP Server rent, VoIP Server Company, A-Z Termination, VoIP Soft switch, Reseller, Soft switch, VoIP Offers Mobile Dialer, Mobile Dialer Reseller, A-Z Termination, VoIP Soft switch, Reseller, DID Numbers, A-Z termination services, implementing of PSTN & multiplatform networks, retail & reseller solutions for VOIP services and providing P2P network property over International non-public hired Circuit [IPLC]. Vos3000 on-line is best VoIP company in East Pakistan, India, Malaysia, Pakistan, Kuwait, UAE, KSA, USA, UK, Sudan, African country, Iraq, Iran, Qatar and lots of Middlest, Western Country. we offer all VoIP services and merchandise. Vos3000 on-line give 100% dedicated server with switch license version. Asian nation information science block answer on the market, Asian nation device piece with none interference and server rent for....

vos3000 server rent features

 

 

VOS3000  2.1.7.0 Features

VOS3000
V2.1.7.0
Date 2019-09-10
KUNSHI NETWORK LTD.
WEB:https://kunshinetwork.com

Kunshi Proprietary and Confidential
Copyright © Kunshi Network. 2019. All rights reserved



Trademarks and Permissions
and other Kunshi trademarks are trademarks of Kunshi Network
All other trademarks and trade names mentioned in this document are the property of their respective
holders.

Notice
The purchased products, services and features are stipulated by the contract made between Kunshi and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.



This chapter describes the user guide of VOS3000 2.1.4.0 client.


Operation Guide
In VOS3000, most data managements can be completed through sheets. Sheets can be opened
by double-clicking corresponding nodes in “Navigation”. The following operations are
supported:
 Open: open current management page.
 Filter: get current configuration from server.
 Copy: copy the currently selected sheet line into the clipboard.
 Paste: paste the line in the clipboard into a sheet with the same type.
 Add: insert new lines.
 Delete: delete sheet lines. If the data are at the server, the selected lines will be marked as “to be deleted”.
 Apply: send currently specified operations (such as add, delete and modify) to the server to carry out.

Before clicking “apply”, all the operations of data are saved only at the client end and will not affect the
server's data; closing the management page would discard these operations.
 Export: export the current sheet into local files.
 Import: import data from local files into the sheet (supported by a few types of sheets).

Batch data operations can be fulfilled by “copy”, “paste” and column “Filling downwards” functions
supported by spreadsheets in VOS3000. See the figure below:


This chapter describes the functions of VOS3000

.

Upon running VOS3000 client, the login dialogue will be shown.

 Server ip: IP address of the remote server.
 User name: user names allowed by the platform.
 Password: user password allowed by the platform.
 Uuid: during the first installation, system will generate this id.
Even password is correct, uuid is still needed. This id can be modified any time, please refer to Configuration Guide.
The system will record IPs typed by users for later use. Users can also delete these historical servers IP.
The initial user name and password are admin

CAUTION!!

Please modify the initial login password as soon as possible.



Rate Management
Rate Group Management
This function is used to define rate groups used for billing.

How to Start
 Double-click “Navigation Rate management”
Table Items
 Rate group name: the name of the rate group. When new accounts are created, one rate
group must be specified and the name here will be used to identify the groups.

Try to choose more informative names that remind people of the rate's details.
 Number of rates: the number of rates contained in the group.
 Equivalent time to 60 seconds for calling card: for calling card only.
 Memo: additional comments.
 Number of using account: the number of accounts using this rate group.
 Create user: the name of the user who created this rate group.
 Time of timing replace: replace time.
 Mode of timing replace: full replace or append replace.
 Name of timing replace: rate group name after replace.

Other Operations
 Double-click the numbers at “Number of rates” to enter the rate management page.
 Double-click the numbers at “Number of using account” to enter the account management page.

Right-Click Menu
 Open: enter the rate management page.
 Fee rate of timing replace: add timing replace fee rates.
 Authorization: enter the authorization management page.

You can simultaneously select multiple rate groups.


For agent, when login system, only those rate groups in the “Authorization” lists will be
shown. As illustrated above, this rate group can be seen by "agent1", "agent2" and "agent3".

Rate Management
This function defines the prefixes to each number during the billing.

How to Start
 Select a line in the rate group management page and choose “Open” in the right-click
menu.
 Double-click the “Number of rate” in the rate group management page.
Table Items
 Rate prefix: the prefix of the called number which matches this rate.

The longest matching prefix will be used. For example, if there are two rate prefix, “0” and “01”, the
number “01117” will be match to “01” since it is the longest pattern that matches “01117”.
 Area prefix: also used for rate matching, area name will be shown according this, please
refer to “Number management Area information”.
 Rate type: available options are “Net”, “Local”, “Domestic” and “International”.

The type will not only be shown in CDR, but also used in many filters and statistics. Please correctly
specify the rate type. Meanwhile, this type will be checked before calling. If a caller does not have the
authorization to call the type of number specified here, the call will be banned.
 Area name: the area corresponding to the rate prefix. Non-editable, which is set by
“Number management Area information”, displays the “Area information” of “Area
prefix”.
 Billing rate: the fee charged for each billing cycle.



 Billing cycle: the session time that exceeds the “First time duration” will be divided into
units with length specified here. When the time cannot be divided clear, it will be
rounded up to the nearest integer.

An example: if the “First time rate” is “0.21”, the “First time duration” is “180”, the “Billing rate” is
“0.15”, and the “Billing cycle” is 60, then according to this rate, a session that lasts 250s will be charged
0.21 + 0.15 * 2 = 0.51.
 Minute cost: calculate by “Billing rate” and “Billing cycle”.
 Section rate:

 Serial number: time section.
 Money amount: money of this section.
 Charged duration: charge time.

Section rate will be used first, sessions that exceeds this time will be charged according to the “Billing
rate” and “Billing cycle”. If none section is set, the “Billing rate” and “Billing cycle” will be used from
the beginning. (Unit: Second).
 Lock type: enable or disable the rate.
 Billing rate for calling card prompt: used for IVR prompt remaining duration.
 Billing cycle for calling card prompt: used for IVR prompt remaining duration.
Other Operations
 The table supports “Import” and “Export” operations.

Refer to the exported files for the import format.
Right-Click Menu
 Modify amount: on column “Billing rate”.

 Split area prefix: for new line only.





 Combine rate prefix: combine “Rate prefix” and “Area prefix” to “Area prefix”.


 Add start bit of prefix: when selected lines are in the status of “to be added”, the function
can be used to modify their initials.
 Delete start bit of prefix: when selected lines are in the status of “to be added”, the
function can be used to modify their initials.

Some international rate list use nonstandard initials. These functions can be used to adjust the initials
after import.
When creating rate policies for national calls, try to use rate prefixes like “01” to “09” instead of using a
single “0”. Otherwise, if the international rate policies are incomplete, some international calls might be
matched to “0” and misclassified as national calls.

Some provider gives minute cost only, when import, you can set “Minute cost”, system will calculate
“Billing rate” automatically. You can use split area prefix and combine rate prefix to modify rates.




Package Management
Package Group Management
This function is used to define packages for billing.

How to Start
 Double-click “Navigation Package management”
Table Items
 Package name: the name of the package.
 Rent period: value of time.
 Rent unit: Day/Month/Year

Package’s period = Rent period * Rent unit, e.g. rent period: 7, rent unit: day, means 7 days package, every 7 days will effect until expire.
 Rent fee: Package cost.
 Minimum consumption: calculate when package expired, if account under consumption,
the difference will be deducted.
 Period rate: the rate of a certain time period. Double-click to open the period rate management. Please refer to the next section for details.
 Free duration: free sessions provided by the package. Double-click to edit it.
Free money amount: gift money provided by the package. Double-click to edit it.




The free duration will be used first, then the free money amount.
 Memo: additional comments.
 Create user: the name of the user who created this package. Right-Click Menu
 Authorization: refer to rate management.


12

2.3.2 Package Free Duration Management

How to Start
 Double-click “Navigation Package management Package free duration management”
Table Items
 Begin time
 End time

Call time within Begin Time and End Time, free duration will be used. If not whole day time, free
duration is from call start to End Time.
 Area prefix: the prefix of free duration.
 Free duration: free time for the prefix.
 Billing cycle: charge cycle.
 Memo: comments on the package.
Right-Click Menu
 Authorization

Please refer to: rate group management.


13

2.3.3 Package Period Rate Management
How to Start
 Double-click the numbers at the “Package management Package period rate”
Examples:
 The rate in the weekends is “0.5”.

 The rate from 0:00 to 8:00 is “0.5” and “0.6” for the rest of the time.

The rate from 0:00:00, September 1st, 2013 to 21:15:00, October 21th, 2013 is “0.5”.


The start and expiration time for yearly periods are different from those for weekly or monthly ones.


14
2.4 Account Management
2.4.1 General Account

How to Start
 Double-click “Navigation Account management”
Table Items
 Account id: the unique identification of the account. This must be unique and cannot be
modified once the account is created.
 Account name: the name of the account (such as the full name of the user).
 Current balance: the current balance of the account.
 Overdraft limit: the maximum credit of the account.
 Billing rate: the rate group for billing.
 Private rate: rate for this account only, if billing rates contains private rate, the lower will
be chosen.
 Today consumption: today's consumption.
 Number of gateway: non-editable. The number of gateways under this account.
Double-click to enter the gateway management page of this account.
 Number of phone: non-editable. The number of phones under this account. Double-click
to enter the phone numbers management page of this account.
 Number of active phone card: non-editable. The number of phone cards under this
account. Double-click to enter the phone card management of this account.

15

 Bind number: non-editable. The bind numbers of this account.
 Number of package: non-editable. It shows the number of packages subscribed by this
account.
 Current package: non-editable. The number of packages effected.
 Agent id: the “Account id” of its parent account. The parent account must exist. Upon
designation, the parent account will become the “Agent” type.
 Customer information: information about the customer. Click “Edit” to change.
 Directory: non-editable. The number of this account’s phonebook. Double click to enter
short number settings.
 Directory limit: number of phonebooks.
 Account category: “Account” or “Agent”, non-editable. When an account has sub
accounts, it automatically becomes an agent.
 Account type: “General” or “Clearing”.
 Memo: comments on the account.
 Account status: “Normal” or “Locked”.
 Expiry date: the expiration date of the account.
 Date of open account: non-editable. The date when the account is created.
Other Operations
 Double-click the number at “Number of gateway” to enter “Mapping gateway
management” page for the account.
 Double-click the number at “Number of phone” to enter “Phone number management”
page.
 Double-click the number at “Number of package” to manage the packages subscribed by
the account.
 Double-click the number at “Current package” to edit the effected package of the
account.
Right-Click Menu
 Disable account: disable the account and all its sub accounts. Phone numbers belonging
to these accounts will not be able to make phone calls.
 Enable account: enable the disabled account.

If an account is deleted, his phone and gateway will belong to no account.
You cannot change clearing account into other type.


16

2.4.1.1 Customer Package Management
This function is used to manage account’s packages.

How to Start
 Double-click “NavigationAccount managementNumber of package”
Table Items
Package name
Effective date
Invalid time

Add packages for the account then choose package name and set the effective date and invalid time of
packages.
The “Invalid time” is the date after which the package cannot be subscribed. For example, if a monthly
lease has effective date (2013-9-2) and invalid time (2013-9-15), on the 2th of September; the package
will be subscribed, and effective through 2013-9-2 to 2013-9-30. But after September 15th, the package
will not be available for subscription. That means this package cannot be used in October.
Rent period
Rent unit
Rent fee
Period rate
Free duration

17

Free money amount
Memo
2.4.2 Payment
This function is used to pay money for account.

How to Start
 Double-click “NavigationAccount management”, select an account; click “Payment”
in the right-click menu.
Operation Details
 Type of payment: If the phone card is selected, the card number and password will be
asked.
 Payment type: Payment/Credit/Make Zero.
 Amount: the amount of payment.
 Memo: comments will be kept as historical records.

Historical payments can be view in the payment record page.
Payment will change account's expiration. Please refer to system parameter:
SERVER_ACCOUNTEXPIREDELAYAFTERPAYMENT
2.4.3 Agent Account
Agent accounts differ with ordinary accounts in that there are accounts belonging to agent
accounts. Once an account becomes an agent account, it will occur in the navigation tree.
Double-click the agent account in the navigation tree to open the “Sub account management”.

Use the filter “Direct” and “All”, respectively, to show the directly sub accounts and all (direct and
indirect) affiliations of the account.
2.4.4 Billing
Phones, gateways and bind numbers will be charged according the account they currently
belong to. If the number being called does not match any rate, the call will be terminated. And
the cause of such termination will be shown in CDR. When the account belongs to other
accounts, the call will cause the agent account to be charged according to its own rate (this
backtracking process ends up at accounts that belong to no other accounts). If the billing turns
the account or any of its agent accounts into “disabled” status, the phones, gateways and bind
numbers will no longer be able to make calls.

18


Billing principle: optimal rate, the deduction amount is calculated by period fee rate, account fee rate,
account private fee rate or phone private fee rate, choose the cheapest.
When account is in debt, he can still make free call.
2.4.5 Authorization Management
This function is used for manage agent’s operation of accounts.

How to Start
 Double-click “NavigationAccount management”, select an account, click
“Authorizations” in the right-click menu
Operation Details
 Authorizations
 Add/delete/modify account: the right to create delete or modify accounts.
 Add/delete/modify phone: the right to manipulate phones belonging to the account.
 Delete/modify phone card: the right to manipulate phone cards belonging to the account.
 Add/delete gateway: the right to manipulate gateways belonging to the account.
 Modify gateway information: the right to modify information about gateways except
capacity.

19

 Modify gateway capacity: the right to modify the number of lines.
 Payment for this account: the right to perform payment for the current account (including
changing the amount of overdraft).
 Payment for sub accounts: the right to pay for the sub accounts.

This function is usually used to facilitate agent development. An agent user can have an agent-typed
account in the system. Administrators can create one or more accounts for them, limiting their rights to
recharge their own account, yet granting those authorizations to add new accounts, phones and gateways,
and to recharge their sub accounts. The agent can create new accounts for its sub-agents. The agent
account can only manipulate its sub accounts. Note that, accounts created by agent accounts must be
designated to an agent account, and the creator must have the authorization to manipulate the designated
agent account. Users logged in with an agent account can only see those accounts that authorized to the
agent. This restriction applies to all account-related operations.
2.4.6 Number Section Limitation
This function is used to limit the phone prefix of the account.

How to Start
 Double-click “NavigationAccount management”, select an account, click
“Authorizations” in the right-click menu.

20

Operation Details
 Begin number: the smallest number of the segment (including the number itself).
 End number: the largest number of the segment (including the number itself).

Number restriction specifies the phone numbers that can be added to the current account, in order to
avoid competition of number resources among agents.
If account type is “agent”, the numbers of its sub accounts should also be in this range. Otherwise there
will be error prompt from the system. If the account type is “ordinary”, the appropriate number segments
will automatically added by the system.


21

2.5 Operation Management
2.5.1 Gateway Operation
2.5.1.1 Routing Gateway
This function is used to manage routing gateway.

How to Start
 Double-click “NavigationOperation managementGateway operationRouting
gateway”
Table Items
 Gateway id: the unique id of the device, used for the authentication of dynamic gateways.
For static gateways (usually relay gateways), the only requirement is their ids do not
conflict with each another.
 Gateway prefix: when the number being called is not registered in the system, the call
will be routed only to gateways which match the prefix specified here. Multiple prefixes
can be specified, separated by commas. Different gateways can be designated with the
same prefix. When conflict occurs, the gateway will be chosen according to following
numbers (the smallest comes first): priority number, the ratio of the number of current
calls to the number of channels, the number of historical calls, and the gateway id.
 Prefix mode:
− Extension: shorter prefixes will be tried if the routing gateway matched by this prefix
cannot deliver the call.

22

− Expiration: no more prefixes will be tried if the routing gateway matched by this
prefix cannot deliver the call.
Examples:

If the prefix mode of “gw2” is set to “Terminal”, the prefixes being tried for the number
“90080001” will be “gw2” and “gw4” in order.
If the prefix mode of “gw2” is set to “Continual”, while others remain the same, the prefixes
being tried for the number “90080001” will be “gw2”, “gw43”, “gw3”, and “gw1” in order.
 Gateway group: the group which gateway belongs to.
 Lock type: “No lock” or “Bar all calls”.
 Line limit: lines of this routing gateway.
 Priority: when the prefixes are the same, gateway with high priority will be used firstly.
 Softswitch: specify the softswitch used by this routing gateway.
 Additional settings
 Ip: see descriptions in the “Additional settings”.
 Configuration password: the password used for gateway registration, which is also the
password used for web configuration.
 Self service password: the password used for web query.
 Caller black/white list group: can set numbers in “Number managementBlack/white
list group”.
 Callee black/white list group: can set numbers in “Number managementBlack/white
list group”.
 Memo: comments on the gateway.
 Routing clearing account id: the billing account charged when the gateway is called.
 Routing clearing account name: the name of the billing account.
 Routing clearing account balance: the balance of the billing account.
 Clearing billing number
− Before rewrite
− After rewrite
Additional settingsNormal

23


 Gateway type
− Static: no registration is required. These are usually relay gateways (i.e. routing
gateway). Static IP addresses and ports can be specified for them.
− Dynamic: registration is required before use.
− Registration: register to other server; please refer to “Registration management”.
 Encryption: check to enable.
 Protocol: H323 or SIP.
 Ip: gateway's IP.
 Signaling port
 Local ip: set IP of local network used for sending, use “Auto” to choose by Linux routing
table.
 Media proxy:
− Auto: let the system decide whether enable media proxy. (Recommended)
− On: always enable media proxy.
− Off: always disable media proxy.
 RTP interrupt detection
− None: disable detection.
− Server to remote: detect audio send from server to device.
− Remote to server: detect audio send from device to server.
− Bidirection: detect both side, if any one side no audio, the call will be interrupt.
 Conversation limitation (seconds): set the max call duration of the gateway.
− None: no limit.

24

− Default: set by “Operation managementSoftswitch managementAdditional
settingsSystem parameterSS_MAXCALLDURATION”.
 Stop switch gateway when rtp start
− Default: set by “Operation managementSoftswitch managementAdditional
settingsSystem parameterSS_GATEWAY_SWITCHSTOPAFTERRTPSTART”.
− On: if using media proxy, when softswitch received RTP packet from the gateway,
won’t try next gateway any more.

This option is NOT affected by “Switch gateway until connect”. When “Switch gateway until connect”
is on, if received RTP packet, stop switch gateway.
− Off: ignore the RTP starting conditions for gateway switch.
 Switch gateway until connect
− Default: set by “Operation managementSoftswitch managementAdditional
settingsSystem parameterSS_GATEWAY_SWITCHUNTILCONNECT”.
− On: switch gateway until softswitch got connect signal (SIP 200 OK/ H323 Connect).

This option priors to “ProtocolStop switch gateway after olc” and “Stop switch gateway after receive
sdp”.
− Off: try next gateway except: call connected, ringing, receive busy or no answer and
settings in “Protocol”.
 Real time computing asr
− On: softswitch will calculate this gateway’s ASR.
− Off: softswitch will not calculate this gateway’s ASR.
− Default: set by “Operation managementSoftswitch management Additional
settings System parameter SS_GATEWAYASRCALCULATE”.
 Real time computing acd
− On: softswitch will calculate this gateway’s ACD.
− Off: softswitch will not calculate this gateway’s ACD.
− Default: set by “Operation management Softswitch management Additional
settings System parameter SS_GATEWAYACDCALCULATE”.
 Check rate: if the call has clearing fee rate, this gateway will be tried.
 Sort by lowest rate per second: use rate per second when sorting. Sort order can be set in
“System management System parameter
SS_GATEWAY_GATEWAYFEERATEROUTESORTCONFIG” and
“SERVER_GATEWAY_ROUTE_FEE_RATE_SORT_CONFIG”.
− Enable: during fee rate sorting, use actual fee rate.
− Disable: during fee rate sorting, see the gateway has the lowest fee rate.
 Lowest profit rate limit: lock this gateway when profit below settings. When the
difference, calculate by rate per second, between caller fee rate and clearing fee rate
lower than the value, this gateway won’t be tried.
Additional settings Routing prefix

25


 Routing caller prefix
− Allow: prefixes of the caller numbers allowed to pass through (left blank to allow all
numbers)
− Forbidden: prefixes of the caller numbers disallowed to pass through

Only one of the “Allow” and “Forbidden” options can be chosen.
 Routing callee prefix
− Allow: prefixes of the called numbers allowed to pass through
− Forbidden: prefixes of the called numbers disallowed to pass through
 Call Restriction on Caller
− Allow: allow the caller with particular prefix to dial callee with particular prefix.
− Forbidden: forbidden the caller with particular prefix to dial callee with particular
prefix.
 Routing caller rewrite rule: rewrite rules for the caller number when called out through
this gateway.
 Routing callee rewrite rule: rewrite rules for the called number when called out through
this gateway.
Additional settings Period control Period rewrite rule

26


 Begin time: time when the rewrite rule comes into effect.
 End time: time when the rewrite rule expires.
 Mode
− The called: the rewrite rule applies to the called number.
− The caller: the rewrite rule applies to the caller number.
 Rewrite rule: the content of the rule.
Additional settings Period control Period call restriction

27


 Weekdays
 Begin time: time when the rule comes into effect.
 End time: time when the rule expires.
 Operation
− Forbidden: forbidden operations for the matched prefixes.
− Allow: allow operations for the matched prefixes.
 Mode
− By caller: matches the prefixes of the caller numbers.
− By callee: matches the prefixes of the called numbers.
 Number prefix: the prefix of the number. Multiple prefixes can be specified, separated by
commas.
Additional settings Period control Period capacity

28


 Weekdays
 Begin time: time when the rule comes into effect.
 End time: time when the rule expires.
 Line limit: the maximum number of channels allowed for this period.
Additional settings Period control Routing settings

29


 Automatically add area code for mobile: “Number management Mobile area” is
needed, default: Off. Softswitch will automatically add area code for mobile number.
 Regional restriction for mobile: restrict callee e.g. allow 25, means caller can dial callee
with prefix 21 only.
 Call restriction on local city: e.g. allow 25, means only allow area 25 to dial local
number.
 Number restriction on caller: only allow specified caller number. “Number
management Mobile area” and “City code” is needed.
 Number restriction on callee: only allow specified callee number.

This function can reduce invalid numbers.
Additional settings Protocol H323

30



Default value is set in “Operation management Softswitch management Additional settings H323
parameter”.
 Setup/CallProceeding/Alerting/CallProceeding(OLC): if signal timeout, softswitch will
try next gateway or hang up.
 Stop switch gateway after olc:
− Off: won’t affect gateway switch.
− On: stop switch gateway after receive faststart or OpenLogicalChannel (H245).

If “Switch gateway until connect” is on, this setting is invalid.
 Q931 NumberingPlan: see H323’s RFC.
 Q931 NumberType: see H323’s RFC.
 Q931 PresentationIndicator: see H323’s RFC.
 Q931 ScreeningIndicator: see H323’s RFC.
 G729 negotiation mode:
− Auto: keep original G729 codec.
− G729: treat G729a or G729 as G729.
− G729a: treat G729 or G729a as G729a.
− G729&G729a: treat G729 or G729a as G729 and G729a.
 FastStart: check to enable.
 H245Tunneling: check to enable.
 H245InSetup: check to enable.
 Allow t38: check to enable.

31

Additional settings Protocol SIP


Default value is set in “Operation management Softswitch management Additional settings SIP
parameter”.
 Invite/Trying/Ringing/SessionProgress: if signal timeout, softswitch will try next
gateway or hang up.
 Stop switch gateway after receive sdp:
− Off: won’t affect gateway switch.
− On: stop switch gateway after receive SDP.

If “Switch gateway until connect” is on, this setting is invalid.
 Reply address: after receive sip request message, send reply signal to which address.
− Socket: send reply signal to request address (recommend).
− Via port: send reply signal to request IP and use port from Via. (Due to network
reasons, some systems will use this mode.)
− Via: send reply signal to address from Via. (May have security risk.)
 Request address: after call establish, send request signal to which address.
− Socket: send request signal to sender address (recommend).
− Contact Port: send request signal to sender IP and use port from Contact.
− Contact: send request signal to address from Contact.
 G729 negotiation mode
− Auto: keep original G729 codec.
− G729: treat G729a or G729 as G729.
− G729a: treat G729 or G729a as G729a.

32

− G729&G729a: treat G729 or G729a as G729 and G729a.
 G729 annexb
− Auto: send routing’s G729 annexb setting to routing.
− yes: annex=yes
− no: annexb=no
− None: no annexb
− Transmit: send caller’s G729 annexb setting to routing.
 G723 annexa: refer to G729 annexb.
 Enable timer protocol: enable routing gateway’s timer protocol to detect over time.
 Enable 100rel: send 1xx to routing gateway (intermediate state like 183).
 Allow t38: allow send T38 signal to routing gateway.
 Enable call forward signal: if call from mapping gateway uses call forward format or
phone’s call forward, then use call forward signal format to send the call.
 Peer number information: set select mode to SIP signal’s caller.
Additional settings Protocol DTMF

 Dtmf receive: specifies the way by which DTMF signals are received. The All option
is recommended, which asks the system to accept all kinds of DTMFs. Once a certain
kind of DTMF is received, this channel will accept the same kind of DTMFs only, thus
effectively avoiding duplicate receptions.

Payload: the payload value in RTP, for the DTMF of the RFC2833 mode.
 Dtmf send(h323): it is set to “Auto” by default, indicating that the system would
determine the best way to send DTMFs based on the receiver’s capacity. If the receiver
provides no capacity set, the system will send according to the default mode. The
RFC2833 mode can only be specified for media proxy.

33

 Dtmf send(sip): it is set to “Auto” by default. The details are the same as those of “Dtmf
send(h323)” described above.
Additional settings Codec H323/SIP



34

 Auto negotiation: determined by caller and callee.
 Softswitch specified: codec can only be sent.

Select one codec, and then double click to add or delete.
Select some codecs, and then right click to add or delete.

For specified codec, “Softswitch specified” is needed.
Additional settings Others

Number length limit
 Caller number allowable length: the lengths of the caller numbers allowed to pass
through the gateway (e.g. fill in “11, 14” to allow numbers of 11 digits or 14 digits only.)
 Callee number allowable length: the lengths of the called numbers allowed passing
through the gateway.

Left blank to allow numbers of all length to pass through, and fill in “0” to allow no numbers to pass
through.
 Number restriction on callee:
− None: no restriction.
− Phone number: allow call platform's phone numbers only.
− Other number: allow call numbers except platform’s phone number.
 Callee transform
 Enable phone display number: when caller is phone, check to use phone’s display
number, uncheck to use phone number.

35


Gateway’s rewrite rule will still be used.
 Set to protect route: if set to protect route, this gateway will not be used to sort with other
gateways. Between protect routes, sort order as normal. If normal gateways are not
connected, the call will switch to protect routes. Protect route enable time can be set,
within the time call is not connected, will be send to protect routes.
 Enable forwarding signal rewrite pool: use number in pool as caller.
Other Operations
 Double-click the content of “Routing clearing account name” to open the account
management page for this account.
Right-Click Menu
 Current call: open the list of “Current call” for this gateway
 Condition monitoring: monitor the gateway status and show the connection information
of this gateway in the “Gateway status” page.
 Connect analysis: open “Connect analysis” sheet for this gateway.
 Interrupt analysis: open “Interrupt analysis” sheet for this gateway.
 Alarm monitoring: open “Routing gateway alarm” settings for selected gateways.
 Total gateway: get total capacity of the selected gateways.
 Filling downwards
 Random generate: to generate password.


36

2.5.1.2 Mapping Gateway
This function is used to manage mapping gateway.

How to Start
 Double-click “Navigation Operation management Gateway management Mapping
gateway”
Table Items
 Gateway id: see the descriptions in “Routing gateway”.
 Lock type: see the descriptions in “Phone management”.
 Authorization type: see the descriptions in “Phone management”.
 Gateway group: set the gateway’s group, used for control several gateways’ total
currency.
 Line limit: the number of concurrent calls allowed by the gateway.
 Routing gateway group: allow or forbidden.
 Softswitch: see the descriptions in “Routing gateway”.
 Additional settings
 Ip: see the descriptions in “Additional settings”.
 Account id: the number of the billing account for this mapping gateway.
 Account name: the name of the billing account for this mapping gateway.
 Configuration password: see the descriptions in “Routing gateway”.
 Self service password: see the descriptions in “Routing gateway”.
 Priority: for static gateway with the same IP, use this priority to match.

37

 Caller black/white list group: see the descriptions in “Routing gateway”.
 Callee black/white list group: see the descriptions in “Routing gateway”.
 Memo: comments on this gateway.
Additional settings Normal

 Gateway type
− Dynamic: registration is required.
− Static: gateway mapping is achieved directly through IP addresses.
 Ip: IP addresses of mapping gateways. Multiple addresses can be specified, separated by
commas.
 Process timeout: the maximum time waited after the call has reached the gateway. If the
connection has not been establish within the time limit, the system server will send a
reject signal to the mapping gateway.
− Default: set by “Operation management Softswitch management Additional
settings System parameter SS_MAPPINGGATEWAYTIMEOUT”.
− None: no limitation.
 Conversation limitation
− Default: set by “Operation management Softswitch management Additional
settings System parameter SS_MAXCALLDURATION”.
− None: no limitation.
 Media proxy: see the descriptions in “Routing gateway”.
 RTP interrupt detection: see the descriptions in “Routing management”.
 Lowest profit rate limit: this gateway will be locked if profit below this value.
 Real time computing asr: see the descriptions in “Routing management”.

38

 Real time computing acd: see the descriptions in “Routing management”.
 First routing strategy
− None: System default.
− Asr: Sort by ASR.
− Lowest rate per second: sort by rate per second.
 Second routing strategy: see “First routing strategy”.
Additional settings Mapping prefix

See the descriptions in “Routing gateway”.
Additional settings Period control

See the descriptions in “Routing gateway”.
Additional settings Routing settings

39


See the descriptions in “Routing gateway”.
Additional settings Protocol H323

 Replace failed reason: specify the error message sent to the mapping gateway when the
call cannot be established.
 Q.931 ProgressIndicator: see the standard reference for H323. See the descriptions in
“Phone management” for details about signaling checkboxes.
 G729 negotiation mode
 Caller: CallingPartyNumber/SourceAddress/Display
 Callee: CalledPartyNumber/DestinationAddress
 FastStart: check to enable.
 H245Tunneling: check to enable.
 Allow t38: check to include T38.
 Send callproceeding immediately: check to send callproceeding when receives setup.

40

 Convert trying: check, if caller uses H323 and callee uses SIP, when callee returns Trying,
VOS will send callproceeding to caller.
 Change 183(sdp) to alerting: check, if caller uses H323 and callee uses SIP, when callee
returns 183 with SDP, VOS will send alerting to caller; Uncheck, VOS will send
callproceeding to caller.
Additional settings Protocol SIP

See the descriptions in “Routing gateway”.
 Caller: get caller number from which field of signal.
− From
− Remote-Party-ID
− Display
 Callee: get callee number from which field of signal.
− To
− Request-Line
 Replace failed reason: specify the error message sent to the mapping gateway when the
call cannot be established.
 Remote ring back mode
− Default: according to routing gateway.
− 183 Session Progress + SDP: when callee ringing, send 183 Session Progress + SDP
to mapping gateway.
− 180 Alerting + SDP: when callee ringing, send 180 Alerting + SDP to mapping
gateway.
 Call authentication mode
− IP
− IP Address and Port
− Authenticate by Password
 Recognize call forward signal: if mapping gateway send calls in forward signal format,
do recognize.

41

Additional settings Protocol DTMF

See the descriptions in “Routing gateway”.
Additional settings Codec

See the descriptions in “Routing gateway”.
Additional settings Others

42


See the descriptions in “Routing gateway”.
Other Operations
 Double-click the content of “Account name” to open the account management page for
this account.
Right-Click Menu
 See the descriptions in “Routing gateway”.


43

2.5.1.3 Gateway Group
This function is used to define gateway groups, which is used to limit gateways during
routing.

How to Start
 Double-click “Navigation Operation management Gateway management Gateway
group”
Table Items
 Gateway group name: the name of gateway group.
 Line limit: total capacity of the gateway group.
 Number of routing gateway: double-click to manage.
 Number of mapping gateway: double-click to manage.
 Memo

If phone or mapping gateway’s Allow gateway groups is deleted totally, means forbidden all routing
gateways.
If phone or mapping gateway’s Forbidden gateway groups is deleted totally, means allow all routing
gateways.


44

2.5.1.4 Online Routing Gateway
This function is used to query online routing gateway.

How to Start
 Double-click “Navigation Operation management Gateway management Online
routing gateway”
Table Items
 Gateway id: the device id of gateway.
 Gateway prefix: the prefix of gateway.
 Number of calling: the number of current sessions maintained by the gateway and the
total capacity of it.
 Line limit
 Routing asr
 Routing acd
 Registered ip: the current IP of the gateway.
 Registration time: the server time of the platform's most recent registration.
 Update time: the time of the most recent confirmation that the platform is online.
 Duration: the time elapsed since the most recent registration (for dynamic gateways). (*
There is no “Time elapsed” item for static gateways.)
 Encryption type: the type of encryption used by the gateway.
 Local ip
 Register name

45

 Softswitch ip: the IP of softswitch that the gateway registered.
 Softswitch name: the name of the softswitch that the gateway registered.
Right-Click Menu
 Current call: open the “Current call” page for this gateway.


46

2.5.1.5 Online Mapping Gateway
This function is used to query online mapping gateway.

How to Start
 Double-click “Navigation Operation management Gateway management Online
mapping gateway”
Table Items
 Gateway id: the device ID of gateway.

Number of calling
 Line limit
 Mapping asr
 Mapping acd
 Registered ip: the current IP of the gateway.
 Registration time: the server time of the platform’s most recent registration.
 Update time: the time of the most recent confirmation that the platform is online.
 Duration: the time elapsed since the most recent registration (for dynamic gateways).

There is no “Time elapsed” item for static gateways.
 Encryption type: the type of encryption used by the gateway.
 Local ip
 Softswitch ip: the IP of softswitch that the gateway registered.
 Softswitch name: the name of the softswitch that the gateway registered.

47

2.5.1.6 Gateway Status
This function is query gateway status.

How to Start
 Double-click “Navigation Operation management Gateway management Gateway
status”
Table Items
 Gateway id

Total calls
 Total connected
 Callee rejected
 Trunking error
 Network error
 Caller abandon
 Average talk time
 Total talk time
 Ip
 Starting time


48

2.5.2 Phone Operation
2.5.2.1 Phone Management
This function is used to manage phone.

How to Start
 Double-click “Navigation Operation management Phone operation Phone
management”
Table Items
 Phone number: the number used as caller ID and the called number for the terminal.
 Configuration password: the password used for terminal registration (For H32, will be
the H323ID)
 Display caller id: the caller ID shown at the called end.
− “Remote-Party-ID” to use the number of the original caller.
− “Display” to use number in “From” field of SIP message.
 Lock type:
− No lock: none restrictions to the terminal.
− Bar outgoing: the terminal is not allowed to call out.
− Bar incoming: the terminal is not allowed to be called.
− Bar all calls: the terminal is denied from any service.
 Authorization type: when a call is initiated by this number, this type will be compared
with the “Rate Type” of the rate. If the “Rate type” of the matching rate has higher
precedence than the type specified here, the call will be denied.

49


The precedence of authorization is: International call Domestic call Local call Net call.
 Monthly consumption
 Monthly min: consumption at least per month.

At the beginning of the month, system will calculate the cost of last month. If the phone’s consumption
less than the value, system will take off the difference.
 Monthly max: consumption at most per month.
 Monthly service fee: rent fee.

Take off at the beginning of month.
 Billing rate: private rate of the phone.
 Supplementary service
 Advanced configuration
 Rewrite rule: rewrite rules for the called number.

Rewrite rules can be used to implement dial local number without add area code, please refer to “rewrite
rule” chapter.
 Routing gateway group: allow routing gateways.
 Account id: editable. Designating the billing account for this terminal.

Rate of this account will be used to bill and perform authorization checks upon calling. The operator that
edits this number must have authorizations to manipulate phones of the concerned account.
 Account name: non-editable. When the account number is correctly set, the
corresponding name of the account will be shown here.

Changing the account number will cause changes to the account and the number segment restrictions of
its agent.
Double-click to the account management page for this account.
 Softswitch
 Reverse charging: if “On”, any call to the number will be charge on this account, instead
of the caller.
 Self service password: the password used by users to login from the web and query bills.
When left blank, the “Configuration password” will be used.
 Call in limitation: when phone is called, maximum of incoming calls.
 Call out limitation: when phone is calling, maximum of outgoing calls.
 Line limit: the maximum number of channels for this phone, which limits the maximum
sum of incoming and outgoing calls processed simultaneously.
 Directory: number of phone's phonebook.
 Directory limit: max number of phone's phonebook.
 Caller black/white list group: see the descriptions in “Routing gateway”.
 Callee black/white list group: see the descriptions in “Routing gateway”.
 Memo: descriptions to this phone.
Supplementary service:

50


 Display caller id: display the caller's ID.
 Call forwarding: forward the calls.
 Do not disturb: reject all calls.
 Call forwarding unconditional: forward all calls to specified number.
 Call forwarding no reply: forward calls to specified number when the call is not
answered or the phone is out of connection.
 Call forwarding on busy: forward incoming calls when the phone is busy.
 Call forwarding on period: forward calls in specified time period.
 Forward display number:
− Default: Use “Softswitch management Additional settings System parameter
SS_CALLFORWARDUSINGORIGINALCALLER”.
− Original caller: display caller’s number.
− Local number: display the phone’s number.
Advanced configuration Normal

51


See the descriptions in “Routing gateway”.
 Register type
− Static: use IP to access.
− Dynamic: use register to access.
− Mapping gateway: use gateway id to access.
 Display caller short e164: if caller has short number in account’s directory or phone’s
directory, then the short number will be shown.
 Try to use routing gateway when phone is offline: when the phone being called is offline,
try to find a matching route in the routing gateway.
− Default: set by “Operation management Softswitch management Additional
settings System parameter SS_ REDIRECTOFFLINEPHONETOGW”.
− On: try routing gateway.
− Off: won’t’ try routing gateway.

52

Advanced configuration Number prefix


53

Advanced configuration Routing settings

See the descriptions in “Routing gateway”.

54

Advanced configuration Protocol H323

See the descriptions in “Mapping gateway”.

55

Advanced configuration Protocol SIP

See the descriptions in “Mapping gateway”.

56

Advanced configuration Protocol DTMF

See the descriptions in “Routing gateway”.

57

Advanced configuration Protocol Codec

See the descriptions in “Routing gateway”.

58

Advanced configuration Period control

See the descriptions in “Routing gateway”.

59

Advanced configuration Audio service

Other Operations
 Double-click the content of “Account name” to open the account management page for
this account.


60

2.5.2.2 Online Phone
This function is used to query online phone.

Static phone is not shown.

How to Start
 Double-click “Navigation Operation management Phone operation Online phone”
Table Items
 Phone number: the number used by the terminal at registration (used as the caller ID and
the called number).
 Number of calling
 Line limit
 Call in capacity
 Call in limitation
 Call out capacity
 Device id: Model of the device.
 Protocol: the protocol used at registration (SIP or H323).
 Registered ip: the remote address of the terminal used at the registration. If the
connection is establish through a firewall, this address may be a local address.
 Registration time: the server time of the terminal’s most recent registration.
 Update time: the time of the most recent confirmation that the terminal is online.
 Duration: the time elapsed since the most recent registration.

61

 Encryption type: the type of encryption used by the gateway.
 Local ip
 Softswitch ip: the information on the softswitch that the gateway registered.
 Softswitch name


62

2.5.3 Business Analysis
2.5.3.1 Routing Analysis
This function is used to simulate the routing process of phone or mapping gateway.

How to Start
 Double-click “Navigation Operation management Business analysis Routing
analysis”
Input Items
 Authentication method:
− Existing device: phone or gateway.
− Static ip: IP of mapping gateway.
 Device id: phone number or gateway ID depends on device type.
 Device type:
− Phone number
− Mapping gateway
 Caller
 Callee
 Softswitch
Output Items
Caller information

63

 Device id: actual caller device.
 Device type
 Routing Caller: caller after caller device’s rewrite rule.
 Routing Callee: callee after caller device’s rewrite rule.
 Minute cost: calculate by billing account’s fee rate.
 Account id: billing account.
 Account name
 Available time: maximum duration.
Callee information
 Serial Number: routing sequence.
 Device id
 Device type
 Outbound caller: caller after callee device’s rewrite rule.
 Outbound callee: callee after callee device’s rewrite rule.
 Minute cost: calculate by callee device’s fee rate.
 Rate deviation: difference between caller device’s fee rate and callee device’s cost.
 Detail: like prefix, priority, score and so on.


64

2.5.3.2 Call Analysis
This function is used to analysis call problem.

How to Start
 Double-click “Navigation Operation management Business analysis Call analysis”
Table Items
 Serial number: the serial number of signaling interaction.
 Caller signaling: content of signaling interaction with caller.
 Callee signaling: content of signaling interaction with callee.
 Memo: message of softswitch.
 time: time of signaling.
Other Operations
 Export: save the signaling as file.
 Import: import the signaling file to do analysis.


65

2.5.3.3 Registration Analysis
This function is used to analysis registration problem.

How to Start
 Double-click “Navigation Operation management Business analysis Registration
analysis”
Table Items
 Serial number: the serial number of signaling interaction.

Registration signaling: content of signaling interaction.
 Memo: message of softswitch.
 time: time of signaling.


66

2.5.4 Current Call
This function is used to query current call.

How to Start
 Double-click “Navigation Operation management Current call”
Table Items
 Caller: the number of the caller.
 Callee: the number of the called.
 Calling gateway: the gateway between the caller and the softswitch.
 Called gateway: the gateway between the called and the softswitch.
 Connect time: the time elapsed since the establishment of the connection.
 Duration
 Continue duration: time elapsed from platform received to call connected.
 Connect delay: time elapsed from send call to routing response.
 Calling code: the voice encoding used in the session.
 Caller audio traffic: the voice traffic of caller.
 Callee audio traffic: the voice traffic of callee.
 Caller coding: voice encodings supported by the caller (acquired by analyzing the
signals).
 Callee coding: voice encodings supported by the called (acquired by analyzing the
signals).
 Caller information: the IP and RTP IP of the caller.

67

 Callee information: the IP and RTP IP of the callee.
 Caller dtmf: the DTMF mode of the caller.
 Callee dtmf: the DTMF mode of the called.
 Media routing: whether the RTP is routed by servers.
 Calling device name: the manufacturer of the caller device.
 Called device name: the manufacturer of the callee device.
 Caller encryption type: the encryption used by the caller.
 Callee encryption type: the encryption used by the called.
 Softswitch ip: the IP address of the softswitch.
 Softswitch name: the name of the softswitch.


68

2.5.5 Concurrency Performance
This function is used to monitor system performance.

System level information can not been seen by agent.



69


How to Start
 Double-click “Navigation Operation management Concurrency performance”


70

2.5.6 Registration Management
This function is used to manage registration to other platform.

How to Start
 Double-click “Navigation Operation management Registration management”
Table Items
 User name
 Authentication password
 Server ip
 Signaling port
 Encryption
 Register period
− Default: set by “Operation management Softswitch management Additional
settings System parameter SS_SIPREGISTEREXPIRE”.
− Auto negotiation: decide by server.
 Local ip
 Local port
 Softswitch
 Mark: identifier of registration information.

When routing gateway type is registration, use mark as registration identification.
 Registration time

71

 Update time
 Actual register cycle
 Last error: error of last time.
 Authentication user: username field of SIP 401/407 message, use user name as default.
 Host name: server address field of SIP REGISTER/FROM/TO, use server ip as default.
 SIP proxy: address of SIP Route.
 User-Agent: field of SIP User-Agent, use VOS3000 + version as default.
 Type
− Third-party: created by third party.
− BLANK: created by system.


72

2.5.7 Domain Management
This function is used to manage domain, which is used for Routing Gateway and Registration.

How to Start
 Double-click “Navigation Operation management Domain management”
Table Items
 Domain: the domain name of routing gateway or registration.
 Ip: Domain’s IP.
 Type
− Dynamic: update DNS every several minutes, can be set by “System management
System parameter SERVER_DNS_UPDATE_INTERVAL”.
− Static: won’t check DNS.
 Update time: DNS last update time.
 Memo


73

2.5.8 Phone Service
This function is used to support KVphone interface.

How to Start
 Double-click “Navigation Operation management Phone service”


74

2.5.9 Softswitch Management
This function is used to manage softswitch.

How to Start
 Double-click “Navigation Operation management Softswitch management”
Table Items
 Access name: the name of the Softswitch.
 Mark
 Additional settings
 Creation time: the time of first access to the softswitch.
 Access time: the most recent access to the softswitch.
 Access ip: the IP address of the softswitch.
 Memo: comments on the softswitch.
Right-Click Menu
 Synchronize data: synchronize settings of the softswitch with VOS3000.
 Current call: current sessions on the softswitch.
 Registration track
 System information: information about the softswitch.

75




76

2.6 Audio Service
2.6.1 Public Audio
This function is used to manage common audio file.

How to Start
 Double-click “Navigation Audio service Public audio”
Table Items
 Audio name
 Language directory: the language catalogue of the audio.
 Memo: comments on the voice file.
 Memory size: display of the size of the voice file. (“0” indicates the file has not been
uploaded yet.)
 Upload file: specify the local path of the voice file for upload.
 Audio file format: display the format of the uploaded voice file.
Toolbar
 Filter: filter the items.
 Copy: copy the selected audio information.

77


The actual audio file data will not be copied.
 Add: add contents to the service.
 Delete: delete selected contents.
 Import: import voice files in batch mode. The voices will be automatically named
according to their file names.
CAUTION

Supported formats include WAV files (8 KHz, 16 bit, monophonic).


78

2.6.2 Internal Audio
This function is used to manage error prompt audio file.

How to Start
 Double-click “Navigation Audio service Internal audio”
Table Items
See the descriptions in “Public audio”.


79

2.6.3 Language Management

How to Start
 Double-click “Navigation Audio service Language management”
Table Items
 Directory name: the name of the language catalogue.
 Memo: information related to the language catalogue.


80

2.6.4 Direct/Callback
2.6.4.1 Direct/Callback Service
This function is used to define direct/callback service and billing.

How to Start
 Double-click “Navigation Audio service Direct/Callback Direct/Callback service”
Table Items
 Service name: name of audio service, used in “Phone management Advanced
configuration Audio service”
 Number of menu: number of IVR menu.
 Language directory: service’s language.
 Service audio: service’s private audio.
 Additional settings: see below.
 Device: service’s devices.
 Memo
 Phone number: the number of phone which uses this audio service.
 Caller number group of record: record the call if caller is in the number group when
second line is connected.
 Callee number group of record: record the call if callee is in the number group when
second line is connected.

81


 Call out display number: “Ivr number” or “Caller”.
 Call quick display number: “Ivr number” or “Caller” number is sent the called for quick
calls.
 Call out callee rewrite rule: rewrite rules of the called number for calls initiated by the
IVR.
Ringing control
 First time audio delay: set the delay after which the voice will be played upon access to
the IVR (Unit: second).
 Access alerting time: maximum time for call-in ringing (Unit: second).
 Alerting end action: “Connect” or “Hang up”.
Callback
 Callback delay: time waited before calling back (Unit: second).
 Replace last call
 Call both side at the same time
 Access decline signaling: specify the rejection signal for IVR callback.
 Retry times: the number of retries for unsuccessful callback.
 Retry interval: the time interval between two retries (Unit: second).
 Callback rewrite rule: the rewrite rules applied to the called number during callback.


82

2.6.4.2 Direct/Callback Audio
This function is used to manage direct/callback’s audio.

How to Start
 Double-click “Navigation Audio service Direct/Callback Direct/Callback audio”
Table Items
See “Public audio”.
 Service: audio belong to which service, blank means all services can use this audio.


83

2.6.4.3 Direct/Callback Template
This function is used to define direct/callback’s template.

How to Start
 Double-click “Navigation Audio service Direct/Callback Direct/Callback
template”
Table Items
 Template id

Template name
 Number of menu
 Language directory
 Additional settings
 Device
Others
 Template is used to configure service, right click to select template and apply to service.


84

2.6.4.4 Direct/Callback Device
This function is used to manage direct/callback device.

How to Start
 Double-click “Navigation Audio service Direct/Callback Direct/Callback device”


85

2.6.5 IP PBX
2.6.5.1 IP PBX Service
This function is used to define IP PBX service and billing.

How to Start
 Double-click “Navigation Audio service Ip pbx Ip pbx service”
Table Items
See “Direct/Callback service”.

86

Advanced configuration

Set period audio and operations.


87

2.6.5.2 IP PBX Audio
This function is used to manage IP PBX’s audio.

How to Start
 Double-click “Navigation Audio service Ip pbx Ip pbx audio”
Table Items
See “Public audio”.
 Service: audio belong to which service, blank means all services can use this audio.


88

2.6.5.3 IP PBX Template
This function is used to define IP PBX’s template.

How to Start
 Double-click “Navigation Audio service Ip pbx Ip pbx template”
Table Items
See “Direct/Callback template”.


89

2.6.5.4 IP PBX Device
This function is used to manage IP PBX device.

How to Start
 Double-click “Navigation Audio service Ip pbx Ip pbx Device”


90

2.6.6 Value Added
2.6.6.1 Value Added Service
This function is used to define Value Added service and billing.

How to Start
 Double-click “Navigation Audio service Value added Value added service”
Table Items
See “Direct/Callback Service”.


91

2.6.6.2 Value Added Audio
This function is used to manage Value Added audio.

How to Start
 Double-click “Navigation Audio service Value added Value added audio”
Table Items
See “Public audio”.
 Service: audio belong to which service, blank means all services can use this audio.


92

2.6.6.3 Phone Polyphonic Ringtone
This function is used to manage polyphonic ringtone audio, which is used in “Phone
management Supplementary service”.

How to Start
 Double-click “Navigation Audio service Value added Phone polyphonic ringtone”
Table Items
See “Public Audio”.


93

2.6.6.4 Voice Mail Audio
This function is used to manage voice mail audio, which is used in “Phone management
Supplementary service”.

How to Start
 Double-click “Navigation Audio service Value added Voice mail audio”
Table Items
See “Public audio”.


94

2.6.6.5 Alarm Prompt Audio
This function is used to manage alarm prompt audio.

How to Start
 Double-click “Navigation Audio service Value added Alarm prompt audio”
Table Items
See “Public audio”.


95

2.6.6.6 Value Added Template
This function is used to define Value Added template.

How to Start
 Double-click “Navigation Audio service Value added Value added template”
Table Items
See “Direct/Callback template”.


96

2.6.6.7 Value Added Device
This function is used to manage Value Added device.

How to Start
 Double-click “Navigation Audio service Value added Value added device”


97

2.7 Data Query
Historical data is independent, won’t be affected by configurations, e.g. delete accounts won’t
remove account’s CDR.
2.7.1 CDR
This function is used to query CDR.

How to Start
 Double-click “Navigation Data query Cdr”
Table Items
By default, the system displays 1000 records every page. This number can be changed in
“System parameter SERVER_QUERY_ONE_PAGE_SIZE”.
 Caller: the phone number of the caller.
 Callee: the phone number of the caller.
 Begin time: the time when the call is initiated.
 End time: the time the call lasts.

In Normal Mode, End Time is begin time + conversation time.
In Clearing Mode, End Time is the actual stop time.

98

Accuracy of billing time makes the difference, e.g. call from 201304018:13:34:40.002 to
201304018:13:34:41.003, billing duration 1.001 second, according to accuracy should treat as 2 second,
and display 201304018:13:34:42.002.
 Conversation time: Actual duration.
 Charged duration: the time used for billing, which is calculated according the Billing
Cycle specified in rate policies.
 Call charges: the fee charged for this call.
 Call expense: the cost of delivering this call.
 Termination reason: see Appendix for details.
 Hangup side
 Calling gateway: the ID of the gateway between the caller and the Softswitch.
 Called gateway: the ID of the gateway between the called and the Softswitch.
 Caller ip: the IP address of the caller.
 Callee ip: the IP address of the called.
 Account name: the name of the account used for billing this call.
 Account id: the number of the account used for billing this call.
 Agent id
 Call type: “Network”, “Local”, “Domestic” or “International”.

Call type depends on the matched fee rate’s Rate Type.
 Area prefix: the prefix used for billing this call.
 Incoming caller: Original caller number sent to server.
 Incoming callee: Original callee number sent to server.
 Outbound caller: the caller number sent to the called after the application of rewrite
rules.
 Outbound callee: the called number sent to the called after the application of rewrite
rules.
 Calling device name
 Called device name
 Package duration
 Package charges
 Billing method
− By caller: billing on caller account.
− By callee: billing on callee account.
 Charge mode
 Continue duration: Time elapsed from platform received to call connected.
 Connect delay (PDD): Time elapsed from send call to routing response.

PDD is defined as the time from send call to callee to receive signal (switch routing gateway will
recalculate), see detail below:

Callee is SIP
1. Receive callee’s 180/200
2. Receive callee’s 486/600
3. If callee is phone, callee’s signal contains SDP

99

4. If callee is routing gateway and enabled “Stop Switch Gateway After Receive SDP”, callee’s signal
contains SDP

Callee is H323
1. Receive callee’s Progress/Alerting/Connect
2. Receive callee’s ReleaseComplete (UserBusy)
3. Callee is phone, callee’s Q931 contains faststart or H245 contains openlogicalchannel
4. Callee is routing gateway and enabled “Stop Switch Gateway After OLC”, callee’s Q931 contains
faststart or H245 contains openlogicalchannel

Media Proxy Enabled
1. Callee is phone, receive callee’s RTP
2. Callee is routing gateway and enabled “Stop Switch Gateway when RTP Start”, receive callee’s
RTP
Right-Click Menu
 Corrected time: Correction of the start time. Only integers are supported (Unit: second)
 Call analysis: Open the “Call analysis” page.


100

2.7.2 Payment Record
This function is used to query payment.

How to Start
 Double-click “Navigation Data query Payment record”
Table Items
 Account id
 Account name
 Payment amount: the amount.
 Account balance: the balance after payment.
 Payment type: “Create Account”, “Credit” or “Payment”.
 Payment time: Time of the payment.
 Mode: Method of the payment.
 Payment user: the name of the user that fulfills this payment.
 Memo: Comments on the payment.
 Agent id
 Agent name
 Serial number


101

2.7.3 Bill Query
2.7.3.1 Revenue Details
This function is used to query account’s consumption.

How to Start
 Double-click “Navigation Data query Bill query Revenue details”
Table Items
 Account id
 Account name
 Total charges
 Total duration
 Local charges: total charge of CDRs which call type is Local.
 Local duration: total duration of CDRs which call type is Local.
 Domestic charges: total charge of CDRs which call type is Domestic.
 Domestic duration: total duration of CDRs which call type is Domestic.
 International charges: total charge of CDRs which call type is International.
 International duration: total duration of CDRs which call type is International.
 Intranet charges: total charge of CDRs which call type is Net.
 Intranet duration: total duration of CDRs which call type is Net.
 Total package: total charge of package’s free money amount.
 Package duration: total duration of package’s free duration.

102

 Number of CDR


103

2.7.3.2 Gateway Bill
This function is used to query mapping gateway’s consumption.

How to Start
 Double-click “Navigation Data query Bill query Gateway bill”


104

2.7.3.3 Phone Bill
This function is used to query phone’s consumption.

How to Start
 Double-click “Navigation Data query Bill query Phone bill”


105

2.7.3.4 Area Details
This function is used to query details of each area.

How to Start
 Double-click “Navigation Data query Bill query Area details”


106

2.7.3.5 Account Area
This function is used to query area consumption of account.

How to Start
 Double-click “Navigation Data query Bill query Account area”


107

2.7.3.6 Account Balance
This function is used to query account and agent’s revenue and expenditure.

Revenue is only for agent, which is the total expenditure of sub accounts.
For ordinary accounts, there will only be expenditures in the table.

How to Start
 Double-click “Navigation Data query Bill query Account balance”


108

2.7.4 Cards Query
2.7.4.1 Phone Card Bill
This function is used to query phone card bill.

How to Start
 Double-click “Navigation Data query Cards query Phone card bill”


109

2.7.4.2 Bind Number Bill
This function is used to query bind number bill.

How to Start
 Double-click “Navigation Data query Cards query Bind number bill”


110

2.7.5 Clearing Query
2.7.5.1 Account Clearing Balance
This function is used to query account’s clearing consumption.
Display the expenditures on each account on different clearing account in order to quickly
calculate operating profits.

How to Start
 Double-click “Navigation Data query Clearing query Account clearing balance”
Table Items
 Clearing costs: total charge of clearing account.
 Clearing duration: total duration of clearing account.
 Clearing package amount: total package amount of clearing account.
 Clearing package duration: total package duration of clearing account.


111

2.7.5.2 Clearing-Account Detail
This function is used to query clearing account’s consumption.

How to Start
 Double-click “Navigation Data query Clearing query Clearing account detail”


112

2.7.5.3 Clearing-Gateway Details
This function is used to query routing gateway’s consumption.

How to Start
 Double-click “Navigation Data query Clearing query Clearing gateway detail”


113

2.8 Data Report
Users can specify in the “System parameter” whether to generate certain data report.


The generation of reports will begin at 1:00 A.M every day.
The time of completion depends on the capacity of the server and the amount of data.
2.8.1 Bill Report
2.8.1.1 Revenue Details Report
This function is used to query account’s consumption report.

How to Start
 Double-click “Navigation Data report Bill report Revenue detail report”

114

Table Items
 Begin time
 End time
 Account id: the number of the account being displayed.
 Account name: the name of the account being displayed.
 Total charges: the total amount of charges.
 Total duration: the total amount of session time for all calls.
 Local charges: the amount charged for local calls.
 Local duration: the amount of session time for local calls.
 National charges: the amount charged for national calls.
 National duration: the amount of session time for national calls.
 International charges: the amount charged for international calls.
 International duration: the amount of session time for international calls.
 Intranet charges: the amount charged for net calls.
 Intranet duration: the amount of session time for net calls.
 Total package: the total consumption of gift amount.
 Package duration: the total consumption of free duration.
 Number of CDR: the total number of phone records.


115

2.8.1.2 Gateway Bill Report
This function is used to query mapping gateway’s consumption report.

How to Start
 Double-click “Navigation Data report Bill report Gateway bill report”
Table Items
 Gateway id: the unique id of the device, used for the authentication of dynamic gateways.
For static gateways (usually relay gateways), the only requirement is that their ids do not
conflict with one another.
 IP: the IP address of the gateway.
 Please refer to the descriptions in “Revenue detail report” for further instructions.


116

2.8.1.3 Phone Bill Report
This function is used to query phone’s consumption report.

How to Start
 Double-click “Navigation Data report Bill report Phone bill report”
Table Items
 Phone number: the number used as caller id and the called number for the terminal.
 Account id: the number of the account that the phone belongs to.
 Billing type: whether the caller or the called is charged.
 Please refer to the descriptions in “Revenue detail report” for further instructions.


117

2.8.1.4 Account Area Report
This function is used to query area consumption of account report.

How to Start
 Double-click “Navigation Data report Bill report Account area report”
Table Items
 See the descriptions in “Revenue detail report”.


118

2.8.1.5 Account Balance Report
This function is used to query account and agent’s revenue and expenditure report.

How to Start
 Double-click “Navigation Data report Bill report Account balance report”
Table Items
 See the descriptions in “Revenue detail report”.


119

2.8.2 Cards Report
2.8.2.1 Phone Card Bill Report
This function is used to query phone card report.

How to Start
 Double-click “Navigation Data report Cards report Phone card bill report”


120

2.8.2.2 Bind Number Bill Report
This function is used to query bind number report.

How to Start
 Double-click “Navigation Data report Cards report Bind number bill report”


121

2.8.3 Clearing Report
2.8.3.1 Clearing Account Detail Report
This function is used to query clearing account’s consumption report.

How to Start
 Double-click “Navigation Data report Clearing report Clearing account detail
report”
Table Items
See the descriptions in “Revenue detail report”.


122

2.8.3.2 Clearing Account Area Report
This function is used to query clearing account’s area consumption report.

How to Start
 Double-click “Navigation Data report Clearing report Clearing account area
report”
Table Items
See the descriptions in “Revenue detail report”.


123

2.8.3.3 Clearing Gateway Detail Report
This function is used to query routing gateway’s consumption report.

How to Start
 Double-click “Navigation Data report Clearing report Clearing gateway detail
report”
Table Items
See the descriptions in “Revenue detail report”.


124

2.8.3.4 Account Clearing Balance Report
This function is used to query account’s clearing consumption report.

How to Start
 Double-click “Navigation Data report Clearing report Account clearing balance
report”
Table Items
See the descriptions in “Revenue detail report”.


125

2.8.4 Analysis Report
 Total calls: total unconnected and total connected.
 Total unconnected: unconnected calls.
 Total connected: calls with connect/busy/no answer/ringing signaling.

Ringing: callee sent SIP 180 or H323 Alerting.
If callee is phone, sent SIP 183 with SDP or H323 CallProceeding(OLC).
If callee is routing gateway, sent SIP 183 with SDP or H323 CallProceeding(OLC) and enable SIP “Stop
switch gateway after receive sdp” or H323 “Stop switch gateway after olc”.
 Total response: calls with connect signaling.
 Average talk time: average call duration.
 Total talk time: total duration.
2.8.4.1 Mapping Gateway Analysis Report
This function is used to analysis mapping gateway.

How to Start
 Double-click “Navigation Data report Analysis report Mapping gateway analysis
report”


126

2.8.4.2 Routing Gateway Analysis Report
This function is used to analysis routing gateway.

How to Start
 Double-click “Navigation Data report Analysis report Routing gateway analysis
report”


127

2.8.4.3 Mapping Gateway Location Analysis Report
This function is used to analysis mapping gateway location.

How to Start
 Double-click “Navigation Data report Analysis report Mapping gateway location
analysis report”


128

2.8.4.4 Routing Gateway Location Analysis Report
This function is used to analysis routing gateway location.

How to Start
 Double-click “Navigation Data report Analysis report Routing gateway location
analysis report”


129

2.8.4.5 Gateway Cross Location Analysis Report
This function is used to analysis mapping gateway cross routing gateway.

How to Start
 Double-click “Navigation Data report Analysis report Gateway cross location
analysis report”


130

2.8.5 Report Management
This function is used to manage reports.

How to Start
 Double-click “Navigation Data report Report management”
Table Items
 Date: date of records in the report.
 Create time: the date when the report is generated.
 Operator: the operator that generated the report.
 Memo: items included in the report.
Right-Click Menu
 Generate all reports
 Generate special report


131

2.9 CDR Analysis
See the descriptions in “Analysis report”.
2.9.1 Connect Analysis
This function is used to analysis gateway connect.

How to Start

Double-click “Navigation CDR analysis Connect analysis”


132

2.9.2 Interrupt Analysis
This function is used to analysis gateway interrupt.

How to Start
 Double-click “Navigation CDR analysis Interruption analysis”


133

2.9.3 Area Analysis
This function is used to analysis gateway area.

How to Start
 Double-click “Navigation CDR analysis Area analysis”


134

2.9.4 Call Distribution
This function is used to show call distribution of 24 hours.

How to Start
 Double-click “Navigation CDR analysis Call distribution”


135

2.9.5 Historical Performance
This function is used to show the concurrent calls on specified date.

Unsuccessful calls are not counted here, so the number shown in the chart will be slight lower than that
in reality.

How to Start
 Double-click “Navigation CDR analysis Historical performance”


136

2.9.6 Gateway Performance
This function is used to show the concurrent calls of gateways on specified date.

Unsuccessful calls are not counted here, so the number shown in the chart will be slight lower than that
in reality.
The number of gateway can be set by “System management System parameter
SERVER_DISPLAY_CHART_GATEWAY_SIZE”.

How to Start
 Double-click “Navigation CDR analysis Gateway performance”


137

2.9.7 Period Connect Analysis
This function is used to analysis total calls/total response/ASR/ACD.

How to Start
 Double-click “Navigation CDR analysis Period connect analysis”


138

2.9.8 Gateway Area Analysis
2.9.8.1 Mapping Area Analysis
This function is used to analysis mapping area.

How to Start
 Double-click “Navigation CDR analysis Gateway area analysis Mapping area
analysis”


139

2.9.8.2 Routing Area Analysis
This function is used to analysis routing area.

How to Start
 Double-click “Navigation CDR analysis Gateway area analysis Routing area
analysis”


140

2.9.8.3 Cross Area Analysis
This function is used to analysis cross area.

How to Start
 Double-click “Navigation CDR analysis Gateway area analysis Cross area
analysis”


141

2.10 Cards Management
2.10.1 Phone Card
This function is used to manage phone card.

How to Start
 Double-click “Navigation Card management Phone card”
Table Items
 Serial number: the sequence number of activated cards. The initial number can be
specified by users.
 Management id
 Card number: the unique id of a phone card. Card numbers of existing cards cannot be
modified.
 Password: the password used for authentication in recharge.
 Money amount: the amount to be recharged.
 Overdraft limit
 Billing rate: the rate used for phone card.
 Package name: the name of the package used for phone card.
 Agent id: the agent account specified in account binding for phone card.
 Lock type: “No Lock” or “Locked”
 Sold

142

 Bind number limit
 Produce time: the date when the card is created.
 Expiration time: the date of expiration.
 Active(Day): the number of days when enabled before expiration time.
 Enable date
 Memo: descriptions of the card.
 Type
− Phone card
− Internet phone card
 User's account id: when used, the number of the account being recharged.
 User's account name: when used, the name of the account being recharged.
Batch creation of phone cards
 Number of cards: the number of cards to be created.

If the initial sequence number is left blank, it will be set to the number that is one plus the largest
sequence number activated up to now.
 Type: Phone card/Internet phone card

Internet Phone Card will auto create both Account and Phone.
 Password mode: whether the cards being created have passwords.
 Begin card number: the initial card number of the cards.
 Password length: the length of the passwords. Passwords are generated automatically by
the system.
 Money amount: the amount to be recharged.
 Begin serial number: the initial sequence number of the cards. The last sequence number
will be automatically determined according to the number of card to be created.
 Card number prefix: the prefix number of the cards being created.
 Overdraft limit
 Active(Day): how many days will account's expiry date be extended after charging.

Set 0 to use system default days, if the expiration date extension is specified in “System management
System parameter SERVER_PAY_DELAY_CUSTOMER_EXPIRE_DAY”, the expiration date of an
account will be re-calculated accordingly after recharge.
 Expire time
 Bind number limit
 Lock type
 Agent id: the agent account specified in account binding for phone cards.
 Memo

Up to now, the card creation has not been completed yet. You can still modify items, such as adding
“Memo”. The creation will be completed after clicking “Apply”.


143

2.10.2 Active Phone Card
This function is used to manage active phone card.

How to Start
 Double-click “Navigation Card management Active phone card”
Table Items
 Card number
 Password
 Display caller id
 Enable date
 Number of bind number
 Bind number limit
 Account id
 Account name
 Memo


144

2.10.3 Bind Number
This function is used to manage bind number.

How to Start
 Double-click “Navigation Card management Bind number”
Table Items
 Phone number
 Display caller id: can be set according to callee.
 Rewrite rule
 Enable date
 Language directory
 Card number
 Account id
 Memo


145

2.11 Alarm Management
 Alarm level: General/Minor/Major/Critical.
 Upper: upper bound which trigger the alarm.
 Lower: lower bound which trigger the alarm.
 Period: detection period.
 Email alarm: can be set by “System management System parameter
SERVER_ALARM_ENABLE_EMAIL”.
 Email: can be set by “System management System parameter
SERVER_ALARM_EMAIL”.
2.11.1 Alarm Settings
2.11.1.1 System Alarm
This function is used to monitor system.

How to Start
 Double-click “Navigation Alarm management Alarm settings System alarm”


146

2.11.1.2 Network Alarm
This function is used to monitor network.

How to Start
 Double-click “Navigation Alarm management Alarm settings Network alarm”


147

2.11.1.3 Disk Alarm
This function is used to monitor disk.

How to Start
 Double-click “Navigation Alarm management Alarm settings Disk alarm”


148

2.11.1.4 Mapping Alarm
This function is used to monitor mapping gateway.

How to Start
 Double-click “Navigation Alarm management Alarm settings Mapping alarm”


149

2.11.1.5 Routing Alarm
This function is used to monitor routing gateway.

How to Start
 Double-click “Navigation Alarm management Alarm settings Routing alarm”


150

2.11.1.6 Balance Alarm
This function is used to monitor account balance.

The number of customer can be set by “System management System parameter
SERVER_ALARM_CUSTOMER_BALANCE_MAX_SIZE”.

How to Start
 Double-click “Navigation Alarm management Alarm settings Balance alarm”


151

2.11.2 Current Alarm
This function is used to manage current alarm.

How to Start
 Double-click “Navigation Alarm management Current alarm”
Table Items
 Alarm severity
 Alarm type
 Alarm object
 Alarm begin
 Alarm end
 Alarm value
 Upper
 Lower
 ACK user
 ACK time
 Memo
Right-Click Menu
 Confirm: input memo to confirm alarm.
 Empty: clear current alarm, and then change the alarm into history.

152

2.11.3 History Alarm
This function is used to query history alarm.

If the current alarm, which is stopped, occurs again, the former alarm will be become history alarm.

How to Start
 Double-click “Navigation Alarm management History alarm”
Table Items
 Alarm severity
 Alarm type
 Alarm object
 Alarm begin
 Alarm end
 Alarm value
 Upper
 Lower
 ACK user
 ACK time
 Memo
 Cleared user
 Cleared time

153

2.12 System Management
2.12.1 User Management
This function is used to manage user.

How to Start
 Double-click “Navigation System management User management”
Table Items
 Login name: the id used for login.
 User password: the login password.
 User name: the name of the user.
 User type
− Administrator: users with all authorizations.
− Operator: users with certain authorizations for operations.
− Agent: users that are only allow viewing the accounts, rate and service packages.
 Authorization: see below.

Memo: comments about the user.
 Last login: last login time.
 Last change password: last change password time.

154


 Select navigation: define user’s navigation tree.
 Navigation preview: preview user’s navigation tree, double click to change privilege
(view or editable).
 Detailed privilege:
Users can specify interfaces and operations available for a non-administrator user. All settings
come into effect immediately.
Authorization template: several templates for authorizations are provided. Users can select a
template and then tune the configurations.

Users of the “agent” type who have the authorization to create users will be able to see all the users they
created in the table, while other users are invisible to them. It is the same when they specify the
availability of rates, packages, and accounts to other users.
Right-Click Menu
 Change password

Password requirements:
− at least 6 characters (at least 8 characters for administrator)
− at least 2 of the following character combination:
at least one lowercase letter

155

at least one uppercase letter
at least one number
cannot be used as starting or ending character.)
− cannot be the same as the name or the reverse of name


156

2.12.2 System Log
This function is used to query system log.

How to Start
 Double-click “Navigation System management System log”
Table Items
 Type: Information/General/Error
 Record time: log time.
 Operating User
 IP: user’s logging IP.
 Event
 Detail
Right Click Menu
 Detail
This function is used to show operating user and operation’s detail.

157




158

2.12.3 System Parameter
This function is used to configure parameters.

How to Start
 Double-click “Navigation System management System parameter”
Table Items
 Parameter name
 Parameter value
 Parameter description


159

2.12.4 System Information
This function is used to show server’s information.

How to Start
 Double-click “Navigation System management System information”


160

2.12.5 Data Maintenance
2.12.5.1 Clean-Up System Log

How to Start
 Double-click “Navigation System management Data maintenance”
Table Items
 Table name: suffix is the date of system log.
 Data volume: number of records.
 Memo


161

2.12.5.2 Empty History Alarm

How to Start
 Double-click “Navigation System management Data maintenance”
Table Items
 Table name: suffix is the date of history alarm.
 Data volume: number of records.
 Memo


162

2.12.5.3 Clean Payment Record

How to Start
 Double-click “Navigation System management Data maintenance”
Table Items
 Table Name: suffix is the date of payment record.
 Data Volume: number of records.
 Memo


163

2.12.5.4 Clean CDR

How to Start
 Double-click “Navigation System management Data maintenance”
Table Items
 Table name: suffix is the date of CDR.
 Data volume: number of records.
 Memo


164

2.12.5.5 Clean Data Report

How to Start
 Double-click “Navigation System management Data maintenance”
Table Items
 Table name: suffix is the date of report.
 Data volume: number of records.
 Memo


165

2.12.5.6 Auto CleanUp

How to Start
 Double-click “Navigation System management Data maintenance”
Usage
 Use “Filter” to get current settings.
 If auto cleanup is enabled, vos will cleanup out of date data every day, including
account/account’s gateway/account’s phone.


166

2.12.6 Online User
This function is used to query online user.

How to Start
 Double-click “Navigation System management Online user”


167

2.13 Number Management
2.13.1 Number Section Query
This function is used to query number section.

How to Start
 Double-click “Navigation Number management Number section query”
Table Items
 Begin number
 End number
 User’s account id
 User’s account name


168

2.13.2 Mobile Area
This function is used to automatically add area code for mobile and make area limitation.
This setting will be used in routing settings of routing gateway, mapping gateway and phone.

How to Start
 Double-click “Navigation Number management Mobile area”
Table Items
 Mobile prefix
 Area code
 Local area
 Memo


169

2.13.3 City Code
This function is used to manage city code.
This setting will be used in Routing Settings of routing gateway, mapping gateway and phone.

How to Start
 Double-click “Navigation Number management City code”
Table Items
 Area code
 Province
 City
 Length of caller: without area code, use comma to separate.
 Length of callee: without area code, use comma to separate.
 Area


170

2.13.4 Area Information
This function is used to define area prefix’s area name, country code, dialing prefix.
This setting will be used in rate management to show prefix’s area name, using longest match.

How to Start
 Double-click “Navigation Number management Area information”
Table Items
 Area prefix
 Area name
 Memo


171

2.13.5 Number Transform

How to Start
 Double-click “Navigation Number management Number transform”


172

2.13.6 Black/White List Group
This function is used to define list group.
This setting will be used in caller/callee black/white list group of routing gateway, mapping
gateway and phone.

Black/white list group is full match, more efficient than prefix match.
For a large number match, use this function instead of prefix match.

How to Start
 Double-click “Navigation Number management Black/White List Group”
Table Items
 Black/white list group: name of the group.
 Memo
Other Operation
 Double click black/white group to edit number list.

173




174

2.13.7 System White List
This function is used to manage system white list.

How to Start
 Double-click “Navigation Number management System white list”
Table Items
 Phone number
 Memo


175

2.13.8 Dynamic Black List
This function is used to manage system black list.

How to Start
 Double-click “Navigation Number management Dynamic black list”
Table Items
 Phone number
 Type: malicious call or no answer
 Effective date
 Expiration time
 Last call time
 Softswitch


176

2.14 Other Operation
2.14.1 Call Track
This function is used to track call signaling.

How to Start
 Click “System Call track”
Usage
 Check “On” to enable track, uncheck to disable.
 Trace length: calculate from current time, stop track when timeout. Uncheck to track all
the time.
 File size limit: size of the signaling file. If over the limitation, file will be recovered.
After enable track, right click in “Current call” or “Cdr” to see call analysis.


System uses 2 files to record track signaling, so the actual space will be double. If one file over the file
size limit, system will use the other file.
All track signaling will be saved, unless file has been covered.


177

2.14.2 Local Settings
This function is used to configure client settings.

How to Start
 Click “System Local settings”
Usage
 Minimize: Status bar/System tray
 No operation automatically locked
 Enable voice alarm: customer alarm audios.
 Recover default settings
 Enable update prompt: click to enable.


178

2.14.3 Lock System
This function is used to hide client interface.

How to Start
 Click “System Lock system”

VOS3000
Manual 2 Function

Issue 01 (2013-09-10) Kunshi Proprietary and Confidential
Copyright © Kunshi Network Technology Co., Ltd.
179

2.14.4 Product Instruction
This function is used to show product instruction.

How to Start
 Click “System Product instruction”


180

3 Supplement
About This Chapter
This chapter introduces the characteristics of VOS3000 interface.
3.7 Interface Description
3.7.1 Filters
The wildcard characters “*” and “?” can be used to specify filter criteria. For example, the
filter criterion “800*” indicates all strings starting with “800”, and the filter criterion
“888??000” represents all 7-digit strings that start with “888” and end with “00”.
The time of filter criteria in CDR and related spreadsheets can be specified according to either
“Beginning of the call” or “End of the call”. When “Beginning of the call” is specified, then
calls started in the specified time span will be matched. Otherwise, calls ended in the specified
time span will be matched. Usually, operators use the time of the “End of the call” to classify
calls.
3.7.2 Shortcuts
F5: Enable filtering
CTRL + C: Copy the selected table cells
ALT + F: Open “Rate management”
ALT + K: Open “Shortcuts”
ALT + S: Open “Package management”
ALT + D: Open “Mapping gateway”
ALT + G: Open “Routing gateway”
ALT + C: Open “Account management”
ALT + P: Open “Phone management”
ALT + A: Open “Current call”

181

ALT + H: Open “Cdr”
ALT + U: Open “User management”
ALT + L: Open “System log”
3.7.3 Cell Colors
Colors of Table Cell
White: Normal
: To be added after clicking the “apply” button
: To be modified after clicking the “apply” button
: To be deleted after clicking the “apply” button
: Selected
: Operation failed
Colors of Gateway Table Cell
: Bar outgoing/incoming calls
: Bar all calls
: Conflict IP address configurations for mapping gateways
Colors of Account Table Cell
: Insufficient balance
: Account terminated
3.8 System Description
3.8.1 Rewrite Rule
Original Prefix: prefix before rewrite.
Target Prefix: prefix after rewrite.
Table 3-1 Rewrite Rule Description
Original
Prefix
Target Prefix Number Number after
Rewrite
Memo
0 0 02584316146 02584316146 do not rewrite
prefix 0
010 025 01012345678 02512345678

182

Original
Prefix
Target Prefix Number Number after
Rewrite
Memo
025 02584316146 84316146 remove prefix
025
* 025* 117 025117 add prefix 025
025* 010 02584316146 010 change number
with prefix 025
into 010
010* 02584316146 0100258431614
6
add prefix 010
* 02584316146 delete all
number
* 12345678 02584316146 12345678 change all
number into
12345678
025* 8008100-80081
21
02584316146 8008100 or
8008101 or…
change number
into one of
8008100 to
8008121
* 12345?78 02584316146 12345178 or
12345278 or…
? will become a
random number
* 12345678;8008
100-8008121;12
345?78
02584316146 12345678 or
number
between
8008100 and
8008121 or
12345?78
randomly
choose one of
the rules, then
rewrite
0??8431 8431 02584316146 84316146 for original
prefix, there can
be any two
digits between 0
and 8
Multiple substitution targets can be specified, separated by the symbol “;”.
When the symbol “?” exists in the substitution targets, each “?” will be replaced by randomly
generated digit. The “?” can occur more than once in the target pattern.
When multiple Rewrite Rules exist, the longest matching pattern will be selected. For
example, if there are two Rewrite Rules: one replaces “0” with “0”, while the other replaces
“010” with “025”, then the number “01012345678” will be replaced with “02512345678”
(since “010” is longer than “0”).
The pattern “*” has the lowest priority and will only be matched when there are no other
matching patterns.

183

3.8.2 Media Proxy
Parameters below can be set in “Operation management Softswitch management
Additional settings System parameter”.
See SS_MEDIAPROXYMODE:
 On: Enable Media Proxy.
 Off: Disable Media Proxy.
 Auto: decide by softswitch, see below.
Step 1 If caller or callee disabled media proxy, then disable.
Step 2 If caller or callee enabled media proxy, then enable.
Step 3 If callee enabled local ring, then enable.
Step 4 If phone and gateway use dynamic register and encrypt, then enable.
Step 5 If SS_MEDIAPROXYBETWEENNET is on, caller and callee from different network, then
enable.
Step 6 If SS_MEDIAPROXYBEHINDNAT is on.
If phone and gateway in the same NAT, SS_MEDIAPROXYSAMENAT is on, then enable.
If phone and gateway in different NAT, one of them in private network, then enable.
Step 7 Finally, disable.
----End
3.8.3 Routing Gateway Sorting
Use callee to find routing gateway.
Parameters below, start with “SS_”, can be set in “Operation management Softswitch
management Additional settings System parameter”.
Parameters below, start with “SERVER_”, can be set in “System management System
parameter”.
Step 1 Match longest prefix
Step 2 Priority (the smaller the higher)
Step 3 If SS_GATEWAYASRROUTESORTCONFIG is Before Line Usage, then sort by route’s
ASR. Routings which disabled real-time computing ASR priory than enabled one.
If SS_GATEWAYFEERATEROUTESORTCONFIG is Before Line Usage, then sort by
routing gateway’s Lowest Rate per Second. Gateway which disabled Sort by Lowest Rate per
Second is prior than enabled.
If the above 2 parameter values are the same, then sort by
SS_GATEWAYFEERATEROUTEBEFOREASR.
Step 4 Sort by Line Usage
If SS_GATEWAYASRROUTESORTCONFIG is Before Current Day Total Call, then sort by
route’s ASR. Routings which disabled real-time computing ASR priory than enabled one.
If SS_GATEWAYFEERATEROUTESORTCONFIG is Before Current Day Total Call, then
sort by routing gateway’s Lowest Rate per Second. Gateway which disabled Sort by Lowest
Rate per Second is prior than enabled.

184

If the above 2 parameter values are the same, then sort by
SS_GATEWAYFEERATEROUTEBEFOREASR.
Step 5 Sort by Current Day Total Call
If SS_GATEWAYASRROUTESORTCONFIG is Before Gateway ID, then sort by route’s
ASR. Routings which disabled real-time computing ASR priory than enabled one.
If SS_GATEWAYFEERATEROUTESORTCONFIG is Before Gateway ID, then sort by
routing gateway’s Lowest Rate per Second. Gateway which disabled Sort by Lowest Rate per
Second is prior than enabled.
If the above 2 parameter values are the same, then sort by
SS_GATEWAYFEERATEROUTEBEFOREASR.
Step 6 Sort by Gateway ID
----End

If caller phone or mapping gateway set first routing strategy or second routing strategy, then uses all
available routing gateways, according to selected strategy.
3.8.4 Package Billing Order
Step 1 Use Free Duration.
See time span of the free duration, the longer the later.
See invalid time, the earlier the prior.
See effective date, the earlier the prior.
Step 2 Use Free Money Amount
See rent type, prior is “Day Month Year”.
See invalid time, the earlier the prior.
See effective date, the earlier the prior.
Step 3 Use Account Money
----End
3.8.5 Parameter Description
3.8.5.1 VOS3000 Parameter
Parameter Name Default Value Parameter Description
SERVER_ALARM_CUSTO
MER_BALANCE_MAX_SI
ZE
1000 Number of accounts in
“Navigation Alarm
management Alarm
settings Balance alarm”
SERVER_ALARM_DISAB
LE
Off Off: enable alarm.
On: disable alarm.
SERVER_ALARM_E164S Default e164 setting in
“Navigation Alarm
management Alarm
Setting”

185

Parameter Name Default Value Parameter Description
SERVER_ALARM_EMAIL Default email setting in
“Navigation Alarm
management Alarm
Setting”
SERVER_ALARM_EMAIL
_DELAY
300 Unit: second. Interval for
email alarm.
SERVER_ALARM_ENAB
LE_EMAIL
Off Default email alarm setting
in “Navigation Alarm
management Alarm
Setting”
SERVER_BILLING_CUST
OMER_DEFAULT_FEERA
TE
Default fee rate group for
HW interface
SERVER_BILLING_FORW
ARD_PREFIX
Billing prefix for Call
Transfer
SERVER_BILLING_FREE
_E164S
Service Number for free, no
time limit
SERVER_BILLING_FREE
_TIME
0 Unit: second. Charged
Duration will cut this value,
but won’t change
conversation time.
SERVER_BILLING_GATE
WAY_ROUTE_PREFIX
Routing gateway additional
prefix, e.g. set 99,88 then if
callee is 99123, will be
charged as 123 in CDR
SERVER_BILLING_HOLD
_TIME_PRECISION
1000 Unit: million second. Time
precision, e.g. set 50, if
duration is 21.049s, then
uses 21s, else if duration is
21.050, then uses 22s.
SERVER_BILLING_NO_C
DR_E164S
See
SERVER_BILLING_FREE
_E164S, but these numbers
won’t create CDR
SERVER_BILLING_RECO
DR_SERVER_HANG_UP
On Valid when
SERVER_BILLING_RECO
DR_ZERO_HOLD_TIME is
on. If
SERVER_BILLING_RECO
DR_SERVER_HANG_UP
is off, hold time is 0 and
hang up by server, the CDR
won’t be saved.

186

Parameter Name Default Value Parameter Description
SERVER_BILLING_RECO
DR_ZERO_HOLD_TIME
On If system is under attack,
turn off this to reduce
process load
SERVER_BILLING_RECO
RD_ILLEGAL_CALL
On Illegal call: caller’s IP
cannot find in mapping
gateways and caller’s
number cannot find in
phones.
SERVER_BILLING_USE_
ROUTING_GATEWAY_P
REFIX


SERVER_CALL_HELPER_
E164
Call helper number, can be
used with
SERVER_BILLING_FREE
_E164S
SERVER_DATABASE_VE
RSION
Version of data
SERVER_DISPLAY_CHA
RT_GATEWAY_SIZE
10 Gateway number in
“Gateway Performance” and
“Period Connect analysis”
SERVER_DISPLAY_CUST
OMER_ALARM_MONEY
20 In “account management”, if
current balance below the
value, color of the row will
be changed
SERVER_DISPLAY_MON
EY_PRECISION
3 Money Precision, e.g. set
value 3, then 1 will be
shown as 1.000.
SERVER_DNS_UPDATE_I
NTERVAL
600 Unit: second. Used for
“Domain management”
SERVER_E164_NON_STA
NDARD_PREFIX
If caller is phone and
SERVER_E164_INTERNA
TIONAL_CALLEE_REBUI
LD is on, before routing,
callee number will omit this
prefix. This parameter won’t
change callee number.
SERVER_MAIL_CUSTOM
ERE_BILL
Off SMTP Send Account
Consumption Email
Automatically.
“Account management
Customer Information
Email”



Parameter Name Default Value Parameter Description
SERVER_MAIL_REPORT_
DAY_OF_WEEK
Monday “Account management
Customer Information
Email Report Sending
Mode Weekly”
SERVER_MAIL_SMTP_FR
OM
127.0.0.1 Email sender’s IP
SERVER_MAIL_SMTP_SE
RVER
127.0.0.1 SMTP Server IP
SERVER_MAX_INFO_ON
E_MESSAGE
10000 Max Send Number per time
when Data Changed
SERVER_PASSWORD_LE
NGTH
8 Default Length of Password
SERVER_PAY_DELAY_C
USTOMER_EXPIRE_DAY
365 Unit: day.
Extend the validity after
recharge
SERVER_PAY_NORMAL_
EXPIRE_ACTIVE_DISCO
UNT
0 Deduct Original Amount
Percent, when Normal
Recharge to Expired
Account(%)
SERVER_PAY_NORMAL_
EXPIRE_ACTIVE_FEE
0.0 Deduct Fee per Day, when
Normal Recharge to Expired
Account(Dollar)
SERVER_PAY_PHONE_C
ARD_EXPIRE_ACTIVE_D
ISCOUNT
0 Deduct Original Amount
Percent, when use phone
card to Recharge Expired
Account(%)
SERVER_PAY_PHONE_C
ARD_EXPIRE_ACTIVE_F
EE
0.0 Deduct Fee per Day, when
use phone card to
Recharge Expired
Account(Dollar)
SERVER_PAY_PHONE_C
ARD_PAY_RELATE_TO_
AGENT
Off Charge Agent Accounts,
which Use Lower Rate, at
the same time, when
customers use Phone Card to
do charge.
SERVER_PHONE_DEFAU
LT_LANGUAGE
1 Call Helper Default
Language Code
SERVER_PSTN_PREFIX 0 PSTN Call Prefix
SERVER_QUERY_CDR_D
ENY_TIME
No CDR Query Time(24
hour) e.g. 18,19,20,21,22,23
SERVER_QUERY_CDR_M
AX_DAY_INTERVAL
31 Maximum Interval for CDR
Inquiry(Day)

188

Parameter Name Default Value Parameter Description
SERVER_QUERY_MAX_
ONE_PAGE_SIZE
200000 Maximum Number of Data
per Page
SERVER_QUERY_MAX_S
IZE
30000000 Data Query Limit(Item)
SERVER_QUERY_ONE_P
AGE_SIZE
10000 Number of Data per
Page(Item)
SERVER_REPORT_CLEA
RING_CUSTOMER_FEE
Off Auto Generate Clearing
Account Details Report
SERVER_REPORT_CLEA
RING_CUSTOMER_IO
Off Auto Generate Account
Clearing Balance Report
SERVER_REPORT_CLEA
RING_CUSTOMER_LOCA
TION_FEE
Off Auto Generate
Clearing-Account Area
Details Report
SERVER_REPORT_CLEA
RING_GATEWAY_FEE
Off Auto Generate Clearing
Gateway Details Report
SERVER_REPORT_CUST
OMER_FEE
On Auto Generate Revenue
Details Report
SERVER_REPORT_CUST
OMER_IO
Off Auto Generate Account
Balance Report
SERVER_REPORT_CUST
OMER_LOCATION_FEE
On Auto Generate Account Area
Detail Report
SERVER_REPORT_GATE
WAY_FEE
On Auto Generate Gateway Bill
Report
SERVER_REPORT_GATE
WAY_MAPPING_ASR_AC
D
Off Auto Generate Mapping
Gateway Connect Analysis
Report
SERVER_REPORT_GATE
WAY_ROUTING_ASR_AC
D
Off Auto Generate Routing
Gateway Connect Analysis
Report
SERVER_REPORT_PHON
E_FEE
On Auto Generate Phone Bill
Report
SERVER_SIP_LOAD_BAL
ANCE_SERVER
Load Balancing Server IP
SERVER_SMAP_RESERV
E_TIME
None SMAP Reserve Duration
(seconds) 60-86400
None: disable.
SERVER_SOFTSWITCH_
CLUSTER
IP List of Softswitch Cluster

189

Parameter Name Default Value Parameter Description
SERVER_SOFTSWITCH_E
NDPOINT_EXPIRE
3600 Unit: second.
Terminal Registration
Expiry Time
SERVER_SOFTSWITCH_E
NDPOINT_NAT_EXPIRE
120 Unit: second.
Terminal Registration
Expiry Time
SERVER_SUPPORT_EXPI
RE_NOTIFY
On Technical Support Expire
Reminder
SERVER_TRACE_FILE_L
ENGTH
40960 Size of Debug file
SERVER_TRACE_MASK ERROR Set Display of Debug
Information
SERVER_TRACE_TO_FIL
E
On Output Debug Information
into File
SERVER_VERIFY_CLEAR
ING_CUSTOMER
Off Check Callee's Phone
Account
On: clearing account’s
balance must over
SERVER_VERIFY_CLEAR
ING_CUSTOMER_REMAI
N_MONEY_LIMIT.
SERVER_VERIFY_CLEAR
ING_CUSTOMER_REMAI
N_MONEY_LIMIT
0.0 Clearing Account Remain
Money Limit 0-10000000
SERVER_VERIFY_CLEAR
ING_CUSTOMER_TIME
Off If
SERVER_VERIFY_CLEAR
ING_CUSTOMER is on,
Check Clearing Account
Available Time
WEB_PHONEBOOKCALL
BACKACCESSNUMBER_
CARD
Access Number for Web
Directory billing by Phone
Card
WEB_PHONEBOOKCALL
BACKACCESSNUMBER_
PHONE
Access Number for Web
Directory billing by Phone
Number
3.8.5.2 Softswitch Parameter
Table 3-2 H323 Parameter
Parameter Name Default Value Parameter Description
SS_H245PORT 10000,39999 H245 port range

190

Parameter Name Default Value Parameter Description
SS_H323DEFAULTNUMB
ERINGPLAN
UnknownPlan(0) Default value in “Routing
Gateway Additional
settings Protocol H323”
SS_H323DEFAULTNUMB
ERTYPE
UnknownType(0) Default value in “Routing
Gateway Additional
settings Protocol H323”
SS_H323DEFAULTPROGR
ESSINDICATOR
ProgressInbandInformationA
vailable(8)
Default value in “Mapping
Gateway Additional
settings Protocol H323”
SS_H323DTMFMETHOD H.245 alphanumeric Default DTMF send mode
SS_H323PRESENTATIONI
NDICATOR
None Default value in “Routing
Gateway Additional
settings Protocol H323”
SS_H323SCREENINGINDI
CATOR
None Default value in “Routing
Gateway Additional
settings Protocol H323”
SS_H323STOPSWITCHAF
TEROLC
Off Default value in “Routing
Gateway Additional
settings Protocol H323”
SS_H323TIMEOUTALERT
ING
120 Unit: second.
Default value in “Routing
Gateway Additional
settings Protocol H323”
SS_H323TIMEOUTCALLP
ROCEEDING
20 Unit: second.
Default value in “Routing
Gateway Additional
settings Protocol H323”
SS_H323TIMEOUTCALLP
ROCEEDINGOLC
20 Unit: second.
Default value in “Routing
Gateway Additional
settings Protocol H323”
SS_H323TIMEOUTSETUP 5 Unit: second.
Default value in “Routing
Gateway Additional
settings Protocol H323”

191

Table 3-3 SIP Parameter
Parameter Name Default Value Parameter Description
SS_SIPAUTHENTICATIO
NCODE
Unauthorized(401) Return code for SIP
authentication, when
Register message or Invite
message without
Proxy-Authorization or
Authorization.
SS_SIPAUTHENTICATIO
NRETRY
6 SIP authentication retry
time, when received 401 or
407
SS_SIPAUTHENTICATIO
NTIMEOUT
10 Time for SIP Authentication
If caller failed to get
authentication within the
time, Softswitch will reject
the call.
SS_SIPNOTIMERMAXSES
SIONTIME
7200 Maximum Conversation
Time for Non-TIMER SIP
Caller
If SIP caller doesn't support
"timer", softswitch will stop
the call when the time is up.
SS_SIPREGISTEREXPIRE Auto Negotiation SIP Registration Expiration
Time to Other
Server(seconds) 20-7200
SS_SIPREGISTERRETRY
DELAY
60 Resend Interval for SIP
Registration when
Failed(Second) 30--600
SS_SIPRESENDINTERVA
L
0.5,1,2,4,4,4,4,4,4,4 Resend SIP Message
Interval (Second)
If got no response or confirm
within the time, Softswitch
will resend SIP message.
If exceeded the retry times,
Softswitch will stop sending
and regard as call failure,
then try another gateway or
hang up.
SS_SIPSENDUNREGISTE
R
On Send Cancel Register
Message
SS_SIPSESSIONTIMEOUT
EARLYHANGUP
0 SIP Timer no reinvite
(update) Early Hang
up(Second)

192

Parameter Name Default Value Parameter Description
SS_SIPSESSIONTTL 600 Detecting SIP Connected
Status Interval(Second)
If SIP caller supports
"session-timer", within the
time Softswitch will detect
connect status according to
the retry times.
If got no confirm message,
Softswitch will regard as call
finish, then hang up.
SS_SIPSESSIONUPDATES
EGMENT
2 SIP Timer reinvite (update)
Interval 2--10
SS_SIPSTOPSWITCHAFT
ERSDP
On Stop Switch Gateway After
Receive SDP
SS_SIPTIMEOUTINVITE 10 Unit: second.
Default value in “Routing
Gateway Additional
settings Protocol SIP”
SS_SIPTIMEOUTRINGIN
G
120 Unit: second.
Default value in “Routing
Gateway Additional
settings Protocol SIP”
SS_SIPTIMEOUTSESSION
PROGRESS
20 Unit: second.
Default value in “Routing
Gateway Additional
settings Protocol SIP”
SS_SIPTIMEOUTSESSION
PROGRESSSDP
120 Unit: second.
Default value in “Routing
Gateway Additional
settings Protocol SIP”
SS_SIPTIMEOUTTRYING 20 Unit: second.
Default value in “Routing
Gateway Additional
settings Protocol SIP”
SS_SIPUSERAGENTPRIV
ACY
Ignore Privacy Setting for Register
User
Ignore: No Privacy field
Id: contain Privacy: id
None: contain Privacy: none
SS_SIPUSERSTOPSWITC
HAFTERINVITETIMEOUT
Off Stop Switch Gateway After
INVITE Timeout

193

Parameter Name Default Value Parameter Description
SS_SIP_INVITE_E164_US
E_REQUEST_LINE
Off Use Number in
Request-Line as Callee and
Keep Number in To
SS_SIP_NAT_KEEP_ALIV
E_MESSAGE
HELLO Content of NAT Keep
Message
SS_SIP_NAT_KEEP_ALIV
E_PERIOD
30 NAT Keep Message's
Period(seconds) 10-86400
SS_SIP_NAT_KEEP_ALIV
E_SEND_INTERVAL
500 NAT Keep Message's Send
Interval(million seconds)
SS_SIP_NAT_KEEP_ALIV
E_SEND_ONE_TIME
3000 NAT Keep Message's
Quantity per Time
SS_SIP_PASSTHROUGH_
302
Off Transmit 302 Signal
Table 3-4 System Parameter
Parameter Name Default Value Parameter Description
SS_ACCOUNTINDICATIO
NMETHOD
Off Insufficient balance alarm
mode
SS_ACCOUNTINDICATIO
NMONEY
10 Insufficient balance alarm
threshold
SS_ACCOUNTINDICATIO
NTIME
100 Insufficient remaining
duration alarm
threshold(minutes)
SS_BLACK_LIST_MALICI
OUS_CALL_CHECK_INT
ERVAL
600 Malicious call dynamic
callee black list monitor
cycle(seconds)
SS_BLACK_LIST_MALICI
OUS_CALL_EXPIRE
3600 Malicious call dynamic
callee black list expired
duration(seconds)
SS_BLACK_LIST_MALICI
OUS_CALL_LIMIT
None Malicious call dynamic
callee black list max call
times
SS_BLACK_LIST_NO_AN
SWER_EXPIRE
2 No answer call dynamic
black list expired
duration(days)
SS_BLACK_LIST_NO_AN
SWER_LIMIT
None No answer call dynamic
black list continuous call
times
SS_BLACK_LIST_NO_AN
SWER_PERIODS
No answer call dynamic
black list monitor period

194

Parameter Name Default Value Parameter Description
SS_CALLCAPTURERTPP
ORT
40000 Local Port for Call
Monitor(Even Number)
SS_CALLFAILEDINDICA
TIONENABLE
None Prompt phone call failed
SS_CALLFORWARDUSIN
GORIGINALCALLER
On Use the Original Caller as
Forward Display Number
SS_CALLREMAINTIMEIN
DICATIONBOUNDARY
1 Time of prompt phone
remaining duration
(minutes). During the call, if
remain time less than the
value, system will give
prompt to both side.
SS_CALLREMAINTIMEIN
DICATIONENABLE
Off Prompt phone remaining
duration
SS_CALLTRANSFERDIAL
KEY
# Confirm Button for Call
Transfer
SS_CALLTRANSFERENT
RYKEY
* Start Button for Call
Transfer
SS_CALLTRANSFERRIN
GFILE

Transfer Waiting Audio
SS_CALLTRANSFERTRA
NSMITRINGTONE
On Send Color Ring back Tone
when Call Transfer
SS_CDRRECORDNONCO
NNECT
Off When saving CDR as TXT,
contains CDR, which hold
time is 0s
SS_CDRRECORDTOFILE Off Save CDR as TXT
SS_DEFAULT_LOCALIP

Default Local Address
SS_DTMFTIMEOUT 5 Waiting time for Automatic
Call Transfer
SS_ENDPOINTREGISTER
REPLACE
On Allow replace the current
registered users when
terminal registration.
SS_ENDPOINTREGISTER
RETRY
6 Max retry times when
terminal registration
SS_ENDPOINTREGISTER
SUSPEND
180 Disable duration after
exceed retry times for when
terminal registration
SS_ENDPOINTTIMETOLI
VE
60 Interval for Lightweight
Registration of
Terminal(seconds)

195

Parameter Name Default Value Parameter Description
SS_GATEWAY_AUTOSW
ITCH_LIMIT
None Times limit for Routing
Gateway Auto-Switch
SS_GATEWAY_SWITCHS
TOPAFTERRTPSTART
On Stop Switch Gateway when
RTP Start
SS_GATEWAY_SWITCHU
NTILCONNECT
Off Switch Gateway Until
Connect
SS_GCINTERVAL 3600 Interval for Clean Useless
Data of Softswitch(seconds)
SS_LOCALRINGDEFAUL
T
localring Default local ring
SS_MAPPINGGATEWAY
TIMEOUT
None Mapping Gateway Default
Timeout
SS_MAXCALLDURATIO
N
None Max Conversation
Limitation(seconds)
SS_MEDIACHECKTIMEO
UT
2 No Media Data Hang Up
Duration(minutes)
SS_MEDIAPROXYBEHIN
DNAT
On Forward RTP for Registered
Terminals behind NAT
SS_MEDIAPROXYBETWE
ENNET
Off Forward RTP for Calls
between Different Networks
SS_MEDIAPROXYMODE Auto Media Proxy
SS_MEDIAPROXYRTPPO
RT
10000,39999 RTP Port for Forwarding
Voice, use Comma to
Separate the Start and End
port
SS_MEDIAPROXYSAME
NAT
On Forward RTP for Registered
Terminals in the same NAT
SS_MOBILEE164LENGTH 11 Length limit for Mobile
Number separated by
commas (Maximum 31),
uses 0 for allow all the
length
SS_REGISTERTRACEMA
XSIZE
5 Registration Track
Maximum Data Size(MB)
SS_REPLYUNAUTHORIZ
ED
On Respond to Unauthorized
Registration or Call
SS_TCPCLOSERESET Off Close TCP connection in
Direct Reset mode.
SS_TIMEOUTCALLFORW
ARDNR
20 Time for Call Forwarding,
When No Reply(seconds)

196

Parameter Name Default Value Parameter Description
SS_TIMEOUTPHONEHAN
GUP
120 Time for Hang Up, When
No Reply(seconds)
SS_TRACEFILELENGTH 40960 Size of Softswitch's Debug
File(KB)
SS_TRACEMASK ERROR Set Display of Debug
Information
SS_TRACETOFILE On Output Debug Information
into File
SS_UNBOUNDINDICATI
ONENABLE
Off Prompt whether the Phone
Card is Binded
SS_VALUEADDEDSERVI
CEIP

Value Added Server IP
SS_VALUEADDEDSERVI
CEPORT
5055 Value Added Server Port
SS_VIRTUAL_IPS DMZ Settings
3.8.5.3 Audio Service Parameter
Parameter Name Default Value Parameter Description
IVR_CALLBACK_KEEP_L
INE_TIME
30 Used for callback line keep.
See
IVR_CALLBACK_KEEP_L
INE_RING_TIME
IVR_CALLREPORTIP Send IVR second line’s call
state. UDP request format:
Call ID, Serial Number, Call
State, Caller Number, Callee
Number, Forward Number,
Menu ID, Menu Name.
Response format: Call ID,
Serial Number.
Call State:
Ringing(180/183)/OK/Bye
IVR_CALLREPORTPORT 8000 Report UDP Port
IVR_CALLREPORTRETR
Y
6 Call State Notify Retry
Times
IVR_CALLREPORTRETR
YINTERVAL
3 Call State Notify Retry
Interval
IVR_CODECPREFORDER g729a,g729,g723,g711a,g71
1u
Voice Codecs Priority
(g729a,g729,g723,g711a,g71
1u)

197

IVR_DEFAULTERRORAU
DIO
defaulterror Default Error Message
Voice
IVR_DEFAULTLANGUAG
E
chinese Use Default Language when
IVR don't know Client's
Language
IVR_ENABLECARDLINE
RESTRICT
On Each Phone Card cannot use
IVR service at the same
time.
IVR_ENABLEPARSEINBA
ND
Off Inband DTMF Analysis
IVR_ENABLEPARSESEC
ONDINBAND
Off Second Line Inband DTMF
Analysis
IVR_PARSEDTMFMODE Auto DTMF Analysis Mode
IVR_RINGINGTIMEOUT 120 Time for IVR Hang Up,
When No Reply(seconds)
IVR_RTPPORT 40000,47999 Media Port Range
IVR_SETUPTIMEOUT 20 Invite Timeout Duration
IVR_SHORTE164AUTORE
CORDENABLE
Off Auto Save Number Function
IVR_SHORTE164AUTORE
CORDLENGTH
4 Auto Save Number Suffix
IVR_SHORTE164AUTORE
CORDMAXNUMBER
5 Auto Save Number Amount
IVR_SIPNOTIMERMAXSE
SSIONTIME
7200 Maximum Conversation
Time for Non-Timer SIP
Caller
IVR_SIPRESENDINTERV
AL
3 Interval for Resend SIP
Message(seconds)
IVR_SIPSENDRETRY 6 Times of Resend SIP
Message
IVR_SIPSESSIONRETRY 6 Retry Times for Detecting
SIP Connected Status
IVR_SIPSESSIONTTL 600 Interval for Detecting SIP
Connected Status(seconds)
IVR_SOFTSWITCHIPADD
RESS
IP of Softswitch
IVR_SOFTSWITCHSIPPO
RT
5060 Port of SIP Softswitch
IVR_SSAVAILABLEIP Access IP List, separated by
commas

198

IVR_TRACEFILESIZE 40960 Size of Softswitch’s Debug
File(KB) 4096-4096000
IVR_TRACEMASK ERROR Set Display of Debug
Information
IVR_TRACETOFILE On Output Debug Information
into File
IVR_WEB_CALLBACK_S
AME_TIME_CODEC
g729a Codec for Call Both Side
IVR_ALARMCALLERE16
4
Voice Alarm Caller Number
IVR_ALARMCONFIRMKE
Y
Voice Alarm Confirm Key
IVR_ALARMPERIOD 5 Voice Alarm
Period(minutes)
IVR_ALARMPREAUDIO alarmpreaudio Voice Alarm Pre-Prompt
Audio
IVR_ALARMRETRY 6 Voice Alarm Retry Times
IVR_ALARMRETRYINTE
RVAL
20 Voice Alarm Retry Interval
IVR_VOICEMAILEXPIRE
DAY
7 Voice Mail Preservation
Days
IVR_VOICEMAILMAXNU
MBER
10 Voice Mail Max Items
IVR_VOICEMAILMAXTI
ME
60 Voice Mail Recording
Length(seconds)
IVR_VOICEMAILWELCO
ME
voicemailwelcome Default Audio for Voice
Mail Access
3.9 Call End Reason
3.9.1 Server Side
Terminations caused by the server are all defined by VOS3000. For any questions related to
this kind of causes, please consult your system supplier.
Following are the causes of this kind:
 Response timeout: the called did not answer the phone before the timeout limit was
reached. The timeout limit can be set either by the “Alerting” signal of Routing Gateway
(when the call is processed through Routing Gateway) or by the
“SS_TIMEOUTPHONEHANGUP” parameter in the Softswitch system (when the call is
directed to a phone)
 Protocol limit: the server cannot process this type of protocol



 Connection timeout: No response to the SIP message was received after specified
number of trials. The maximal number of trials can be specified by the
“SS_SIPRESENDINTERVAL” and “SS_SIPSENDRETRY” parameters in the
Softswitch system.
 Busy: the number being called is busy.
 Account locked: the account is disabled. It may also due to the lockdown of its agent
account.
 Session timeout: the caller or the called supports the SIP Timer protocol, yet it has not
received the updating signal within a time limit; or, neither does the caller nor the called
support the SIP Timer protocol, yet the session time exceeded the value specified by the
system parameter
 SS_SIPNOTIMERMAXSESSIONTIME”.
 Caller’s number restricted: the length of the caller’s number exceeds the length specified
by the system parameter “SS_CALLERALLOWLENGTH”.
 Called number restricted: the length of the called number exceeds the length specified by
the system parameter “SS_CALLERALLOWLENGTH”.
 Proceeding timeout: No response is received from the server within the time limit. The
time limit can be specified by the “Setup” and “Callproceeding” parameters in the
routing gateway.
 Caller’s number prefix restricted: the mapping gateway does not accept the caller’s
number prefix.
 Unregistered: the terminal is not register, and is not allowed to make the call.
 Called number locked: the called is currently locked.
 Called number prefix restricted: the gateway for the caller or the called gateway does not
accept the called number prefix.
 Caller locked: the caller is currently locked.
 Connection establishment timeout: the connection is not established within the timeout
limit set by the mapping gateway. The time limit can be changed by setting the
proceeding timeout parameter in the mapping gateway.
 Account expired: the account is expired.
 Connection limit exceeded: the maximum number of outgoing calls is reached. The
maximum number can be specified in the system.
 Forcible hang-up: the server disconnected the session, usually because the client chose to
end the session in their user interface.
 Account disabled: the account is currently disabled. Please check the status of the
account it belongs to.
 The called not online: There is no appropriate device to accept this call. For example,
there is no matching routing gateway.
 No-answer forwarding by the caller: the caller has set the no-answer forwarding
 Timed forwarding: the call matches the timed forwarding criteria specified in the phone
management settings.
 On-busy forwarding: the call matches the on-busy forwarding criteria specified in the
phone management settings.
 No-answer forwarding by the called: the call matches the no-answer forwarding criteria
specified in the phone management settings.
 Forwarding loop: Due to the wrong configuration of users, the forwarding route has
loops.

200

 Call forwarding by the called: the call matches the call forwarding criteria specified in the phone management settings.
 Do-not-disturb from the called: the called is in the do-not-disturb status
 Session closed by the called: the called did not send the hang-up signal, but disconnected the TCP connection
 Session closed by the caller: the caller did not send the hang-up signal, but disconnected the TCP connection
 Illegal call: the call comes from an unauthorized IP address and the caller’s number is
not registered in the system.
 No matching rate: There is no rate that matches this call.
 No matching account: There is no account to bill this call.
 Insufficient balance: the account has insufficient balance
 Call restriction: the call is prevented by restrictions (such as International call) set by the phone or the gateway.
 Hang-up by the called: the hang-up signal comes from the called.
 Hang-up by the caller: the hang-up signal comes from the caller.


Client Side
H323 Device
UnknownCauseIE
UnallocatedNumber
NoRouteToNetwork
NoRouteToDestination
SendSpecialTone
MisdialledTrunkPrefix
ChannelUnacceptable
CallAwarded
Preemption
PreemptionCircuitReserved
NormalCallClearing
UserBusy
NoResponse
NoAnswer
SubscriberAbsent
CallRejected
NumberChanged
Redirection
ExchangeRoutingError



NonSelectedUserClearing
DestinationOutOfOrder
InvalidNumberFormat
FacilityRejected
StatusEnquiryResponse
NormalUnspecified
NoCircuitChannelAvailable
CallQueued
NetworkOutOfOrder
FrameModeOOS
FrameModeOperational
TemporaryFailure
Congestion
AccessInformationDiscarded
RequestedCircuitNotAvailable
PrecedenceCallBlocked
ResourceUnavailable
QoSNotAvailable
RequestedFacilityNotSubscribed
OutgoingCallsBarred
OutgoingCallsBarredInCUG
IncomingCallsBarred
IncomingCallsBarredInCUG
BearerCapNotAuthorised
BearerCapNotPresentlyAvailable
InconsistentOutgoingIE
ServiceOptionNotAvailable
BearerCapNotImplemented
ChannelTypeNotImplemented
RequestedFacilityNotImplemented
OnlyRestrictedDigitalBearerCapAvailable
ServiceOrOptionNotImplemented
InvalidCallReference


IdentifiedChannelNonExistent
CallIdentifyNotSuspendedCall
CallIdentifyInUse
NoCallSuspended
ClearedRequestedCallIdentity
UserNotInCUG
IncompatibleDestination
NonexistentCUG
InvalidTransitNetwork
InvalidMessageUnspecified
MandatoryIEMissing
MessageTypeNonexistent
MessageNotCompatible
IENonExistantOrNotImplemented
InvalidIEContents
MessageNotCompatibleWithCallState
TimerExpiry
ParameterNonexistent
UnrecognisedParamaterDiscarded
ProtocolErrorUnspecified
InterworkingUnspecified
ErrorInCauseIE

SIP Device
Multiple Choices
Moved Permanently
Moved Temporarily
Use Proxy
Alternative Service
Bad Request
Unauthorized
Payment Required
Forbidden
Not Found



Method not Allowed
Not Acceptable
Proxy authentication Required
Request Timeout
Gone
Request Entity Too Large
Request-URI Too Long
Unsupported Media Type
Unsupported URI Scheme
Bad Extension
Extension Required
Session Interval Too Small
Interval Too Brief
Temporarily Unavailable
Call/Transaction Does not Exist
Loop Detected
Too Many Hops
Address Incomplete
Ambiguous
Busy Here
Request Terminated
Not Acceptable Here
Request Pending
Server Internal Error
Not Implemented
Bad Gateway
Service Unavailable
Server Time-out
Version not Supported
Message Too Large
Busy Everywhere
Decline
Does not Exist Anywhere



Not Acceptable
First Usage
Whole Sales Operation
 Create Fee Rate Group
 Create Fee Rate
 Create Account
 Create Mapping Gateway
 Create Routing Gateway
Example
 Customer IP: 172.16.1.11
 Routing Gateway IP: 172.16.1.12
Double click “Navigation Rate management”, add rate group 0.5 and apply.

Double click “Number of rates 0” to add fee rate.

Double click “Navigation Account management”, add account test and apply.

Double click “Number of gateway 0” to add mapping gateway.

Double click “Navigation Routing gateway”, add routing gateway caller.125 and apply.




After configuration, ask customer to send SIP call, then open “Navigation Data query Cdr” to see call result.




Maintenance
About This Chapter
This chapter describes the maintenance of VOS3000 solutions.

CAUTION

If one server deployed multiple services, should start and stop in the following order.
Service Start
Step 1 Extreme Media Proxy
/etc/init.d/empd start
Step 2 Softswitch
/etc/init.d/mbx3000d start
Step 3 VOS3000
Main Service
/etc/init.d/vos3000d start
Web Service
/etc/init.d/vos3000websv start
Web Client
/etc/init.d/vos3000webct start
Step 4 Dial
/etc/init.d/IVRdiald start
Step 5 Value Added



/etc/init.d/IVRvalueaddedd start
Step 6 IP PBX
/etc/init.d/IVRippbxd start
Step 7 Audio Player
/etc/init.d/IVRaudioplayerd start
4.2 Service Stop
Step 1 Softswitch
/etc/init.d/mbx3000d stop
Step 2 Dial
/etc/init.d/IVRdiald stop
Step 3 Value Added
/etc/init.d/IVRvalueaddedd stop
Step 4 IP PBX
/etc/init.d/IVRippbxd stop
Step 5 Audio Player
/etc/init.d/IVRaudioplayerd stop
Step 6 Extreme Media Proxy
/etc/init.d/empd stop
Step 7 VOS3000
Main Service
/etc/init.d/vos3000d stop
Web Service
/etc/init.d/vos3000websv stop
Web Client
/etc/init.d/vos3000webct stop
4.3 Service Restart
Step 1 Softswitch
/etc/init.d/mbx3000d restart
Step 2 Dial
/etc/init.d/IVRdiald restart



Step 3 Value Added
/etc/init.d/IVRvalueaddedd restart
Step 4 IP PBX
/etc/init.d/IVRippbxd restart
Step 5 Audio Player
/etc/init.d/IVRaudioplayerd restart
Step 6 Extreme Media Proxy
/etc/init.d/empd restart
Step 7 VOS3000
Main Service
/etc/init.d/vos3000d restart
Web Service
/etc/init.d/vos3000websv restart
Web Client
/etc/init.d/vos3000webct restart