VOS3000 V2.1.8.05 FEATURES | Clean Edition

We offer VOS3000 Softswitch hosted package with excellent performance server and service.

VOS3000 V2.1.8.05 FEATURES | Clean Edition

vos-2.1.3.2 server rent Features

V2.1.8.05 VERSIONS AVAILABLE FOR RENTAL & ONETIME INSTALLATION -Kunshi Network

The latest version of VOS 3000 has been identified as a stable and efficient high-performance carrier-class system even after extensive research. It also follows its ancestor versions’ footprint by providing features like System Management, User Management, Data Query, and Web Self-Service System, among other features.

 

 

VOS3000  2.1.8.05 Features

VOS3000 V2.1.8.05


kunshinetwork Limited
Copyright © kunshinetwork Limited All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of kunshinetwork Limited
Trademarks and Permissions
and other kunshinetwork Limited trademarks are trademarks of kunshinetwork Limited.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between kunshinetwork
Limited and the customer. All or part of the products, services and features described in this document may
not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all
statements, information, and recommendations in this document are provided "AS IS" without warranties,
guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the , but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
kunshi Network Limited
Website: http://www.kunshinetwork.com
Email:[email protected]
This document describes the functions and operations of VOS3000 V2.1.8.0 client.
Installation and commissioning engineers.
NM configuration engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows. Symbol
Description
Indicates a hazard with a high level or medium level of risk
which, if not avoided, could result in service interruption.
Indicates a hazard with a low level of risk which, if not
avoided, could result in data missing.
Indicates a potentially hazardous situation that, if not avoided,
could result in unanticipated results.
Provides a tip that may help you solve a problem or save time.
Provides additional information to emphasize or supplement
important points in the main text.
About This Chapter
This chapter describes the user guide of VOS3000 V2.1.8.0 client.
Operation Guide
In VOS3000 V2.1.8.0, most data managements can be completed through sheets. Sheets can be opened
by double-clicking corresponding nodes in Navigation . The following operations are supported: Open: open current management page.
Filter: get current configuration from server.
Paste: paste the line in the clipboard into a sheet with the same type.
Delete: delete sheet lines. If the data are at the server, the selected lines will be marked as to be deleted
Apply: send currently specified operations such as add, delete and modify to the server to carry out.
Copy: copy the currently selected sheet line into the clipboard. Add: insert new lines.
Before clicking apply , all the operations of data are saved only at the client end and will not affect the
server's data; closing the management page would discard these operations.
Export: export the current sheet into local files.
Import: import data from local files into the sheet supported by a few types of sheets .
Batch data operations can be fulfilled by copy , paste and column Filling downwards functions
supported by spreadsheets in VOS3000 V2.1.8.0. See the figure below:
About This Chapter
This chapter describes the functions of VOS3000 V2.1.8.0.
Login
Upon running VOS3000 V2.1.8.0 client, the login dialogue will be shown.
Server ip: IP address and login port of the remote server.
Password: user password allowed by the platform.
User name: user names allowed by the platform.
Uuid: during the first installation, system will generate this id.
Even password is correct, uuid is still needed. This id can be modified any time, please refer
to Configuration Guide.
The system will record IPs typed by users for later use. Users can also delete these historical
servers IP.
The initial user name and password are admin and admin.
Please modify the initial login password as soon as possible.
Rate Management
Rate Group Management
This function is used to define rate groups used for billing.
Double-click Navigation Rate management
Rate group name: the name of the rate group. When new accounts are created, one rate
group must be specified and the name here will be used to identify the groups.
Table Items
Try to choose more informative names that remind people of the rate's details.
Number of rates: the number of rates contained in the group.
Number of using account: the number of accounts using this rate group.
Create user: the name of the user who created this rate group.
Equivalent time to seconds for calling card: for calling card only.
Memo: additional comments.
Other Operations
Double-click the numbers at Number of rates to enter the rate management page.
Double-click the numbers at Number of using account to enter the account
management page.
Open: enter the rate management page.
Filling downwards: use for copy information.
Fee rate of timing replace: add timing replace fee rates.
Authorization: enter the authorization management page.
You can simultaneously select multiple rate groups.
For agent, when login system, only those rate groups in the Authorization lists will be
shown. As illustrated above, this rate group can be seen by "agent", "agent" and "agent".
Rate Management
This function defines the prefixes to each number during the billing.
Select a line in the rate group management page and choose Open in the right-click menu.
Double-click the Number of rates in the rate group management page.
Billing prefix: input billing number to find used billing rate.
Add domestic area code brief : add prefix - automatically.
Rate prefix: the prefix of the called number which matches this rate.
Filter
Add domestic area code full : add Chinese mobile phone prefix, and all area code defined by City code automatically.
Table Items
The longest matching prefix will be used. For example, if there are two rate prefix, and , the
number will be match to since it is the longest pattern that matches .
Area prefix: also used for rate matching, area name will be shown according this, please
refer to Number management Area information .
Rate type: available options are Net , Local , Domestic and International .
The type will not only be shown in CDR, but also used in many filters and statistics. Please correctly
specify the rate type. Meanwhile, this type will be checked before calling. If a caller does not have the
authorization to call the type of number specified here, the call will be banned.
Area name: the area corresponding to the rate prefix. Non-editable, which is set by
Number management Area information , displays the Area information of Area
prefix .
Billing rate: the fee charged for each billing cycle.
Billing cycle: the session time that exceeds the First time duration will be divided into
units with length specified here. When the time cannot be divided clear, it will be
rounded up to the nearest integer.
An example: if the First time rate is . , the First time duration is , the Billing rate is
. , and the Billing cycle is , then according to this rate, a session that lasts s will be charged
. + . = ..
Rate Minute : calculate by Billing rate and Billing cycle .
Lock type: enable or disable the rate.
Serial number: time section.
Charged duration: charge time.
Section rate:
Money amount: money of this section.
Section rate will be used first, sessions that exceeds this time will be charged according to the Billing
rate and Billing cycle . If none section is set, the Billing rate and Billing cycle will be used from
the beginning. Unit: Second .
Billing rate for calling card prompt: used for IVR prompt remaining duration.
Tax rate: used for daily tax increases.
Billing cycle for calling card prompt: used for IVR prompt remaining duration.
Other Operations
The table supports Import and Export operations.
Refer to the exported files for the import format.
Modify amount: on column Billing rate .
Modify amount: select the need to modify the amount of the line, when the mouse is in
the Billing rate or Rate Minute, can be selected on the amount of line adjustment.
Multiple of original amount: the original Billing rate amount multiplied by the set value.
Add money to original amount: the original Billing rate amount add the set value.
Combine rate prefix: combine Rate prefix and Area prefix to Area prefix .
Split area prefix: for new line only.
Add start bit of prefix: when selected lines are in the status of to be added , the function
can be used to modify their initials.
Delete start bit of prefix: when selected lines are in the status of to be added , the
function can be used to modify their initials.
Fee rate of timing replace: At a certain time, modify the setting rates.
Some international rate list use nonstandard initials. These functions can be used to adjust the initials
after import.
When creating rate for national calls, try to use rate prefixes like to instead of using a single
. Otherwise, if the international rate are incomplete, some international calls might be matched to
and misclassified as national calls.
Some provider gives minute cost only, when import, you can set Rate Minute , system will calculate
Billing rate automatically. You can use split area prefix and combine rate prefix to modify rates,obtain
the rate which can be VOS3000 V2.1.8.0 system accepted.
Package Management
Package Group Management
This function is used to define packages for billing.
Double-click Navigation Package management
Package name: the name of the package.
Rent period: value of time.
Table Items
Rent unit: Day/Month/Year.
Package’s period = Rent period Rent unit, e.g. rent period: , rent unit: day, means days package,
every days will effect until expire.
Allow non full order:
On: if package order is not on the first day of subscription period, the rent is
calculated from ordered day to expired day of package.
Off: if package order is not on the first day of subscription period ,then tent full
deduction,The rent will be fully deducted.
Rent fee: Package cost.
If rent fee is , rent will be always subscribed.
Minimum consumption: calculate when package expired, if account under consumption,
the difference will be deducted.
Become effective spending limit: only if period suite consumption more than or equal to
this value ,this package can be used.
Period rate: the rate of a certain time period. Double-click to open the period rate
management. Please refer to the next section for details.
Free duration: free sessions provided by the package. Double-click to edit it.
Free money amount: gift money provided by the package. Double-click to edit it.
The free duration will be used first, then the free money amount.
Memo: additional comments.
Create user: the name of the user who created this package.
Authorization: refer to rate management.
Package Free Duration Management
Double-click Navigation Package management Free duration
Begin time: the begin time of free duration.
Table Items
End time: the end time of free duration.
Call time within Begin Time and End Time, free duration will be used. If not whole day time, free
duration is from call start to End Time.
Area prefix: the prefix of free duration.
Billing cycle: charge cycle.
Free duration: free time for the prefix.
Memo: comments on the package.
Authorization
Please refer to: rate group management.
Account Management
General Account
Double-click Navigation Account management
Account id: the unique identification of the account. This must be unique and cannot be
modified once the account is created.
Account name: the name of the account such as the full name of the user .
Current balance: the current balance of the account.
Private rate: rate for this account only, if billing rates contains private rate, the lower will be chosen.
Today consumption: today's consumption.
Number of gateway: non-editable. The number of gateways under this account.
Double-click to enter the gateway management page of this account.
Number of phone: non-editable. The number of phones under this account. Double-click
to enter the phone numbers management page of this account.
Table Items
Overdraft limit: the maximum credit of the account.
Billing rate: the rate group for billing.
Number of active phone card: non-editable. The number of phone cards under this
account. Double-click to enter the phone card management of this account.
Bind number: non-editable. The bind numbers of this account.
Current suite: non-editable. The number of packages effected.
Additional settings: information about the customer. Click Edit to change.
Directory: non-editable. The number of this account’s phonebook. Double click to enter short number settings.
Directory limit: number of phonebooks.
Account type: General , Phone card or Clearing .
CTD billing model: just used for callback business, and account is Agent type.
Suite order: non-editable. It shows the number of packages subscribed by this account.
Agent id: the Account id of its parent account. The parent account must exist. Upon
designation, the parent account will become the Agent type.
Account category: Account or Agent , non-editable. When an account has sub
accounts, it automatically becomes an agent.
Memo: comments on the account.
Account status: Normal or Locked .
Standard: callback billing mode of Agent account is decided by the subsidiary
account’s in callback business.
Flow: callback billing mode of Agent account is decided by its own setting in
callback business.
CTD billing mode setting is often used for the condition where the first line free billing and the
second line billing in callback business.
Expiry date: the expiration date of the account.
Advance amount: advanced money for ongoing calls.
Additional settings Enable anti overdraft
Date of open account: non-editable. The date when the account is created.
Other Operations
Double-click the number at Number of gateway to enter Mapping gateway
management page for the account.
Double-click the number at Number of phone to enter Phone number management page.
Double-click the number at Number of package to manage the packages subscribed by the account.
Double-click the number at Current package to edit the effected package of the account.
Disable account: disable the account and all its sub accounts. Phone numbers belonging
to these accounts will not be able to make phone calls.
Enable account: enable the disabled account.
If an account is deleted, his phone and gateway will belong to no account.
You cannot change clearing account into other type.
Customer Package Management
This function is used to manage accounts packages.
Double-click Navigation Account management Suite order
Package name: name of the package need to order.
Effective date: time of the package begin order.
Invalid time: time of the package stop order.
Table Items
Add packages for the account then choose package name and set the effective date and invalid time of
packages.
The Invalid time is the date after which the package cannot be subscribed. For example, if a monthly
lease has effective date -- and invalid time -- , on the th of September; the package
will be subscribed, and effective through -- to --. But after September th, the package
will not be available for subscription. That means this package cannot be used in October.
Priority : package with high priority will take effect firstly the smaller the value, the
higher the priority , if packages' priority are the same but not none , account balance
will determine packages together to take effect or not. priority with "none" will finally
take effect. if packages’priority are all "none", system will determine the effective order
of package.
Failed processing mode: the processing mode after suite order failed.
Try after recharge: immediately try to order suite again once account be recharged.
Try next cycle: try to order suite again in next cycle.
Delete order: delete the order directly.
Percentage rent: rent of percentage.
Memo: comments on the package.
Rent period, Rent unit, Rent fee, Minimum consumption, Become effective spending
limit, Period rate, Free duration, Free money amount, Suite memo: display package
information corresponding to the package name after the apply succeeds.
Payment
This function is used to pay money for account.
Double-click Navigation Account management , select an account; click Payment in the .
Operation Details
Type of payment: If the phone card is selected, the card number and password will be asked.
Payment type: Payment/Credit/Make Zero.
Amount: the amount of payment.
Memo: comments will be kept as historical records.
Historical payments can be view in the payment record page.
Payment will change account's expiration. Please refer to system parameter:
SERVER_PAY_DELAY_CUSTOMER_EXPIRE_DAY
Agent Account
Agent accounts differ with ordinary accounts in that there are accounts belonging to agent
accounts. Once an account becomes an agent account, it will occur in the navigation tree.
Double-click the agent account in the navigation tree to open the Sub account management .
Use the filter Direct and All , respectively, to show the directly sub accounts and all direct and
indirect affiliations of the account.
Billing
Phones, gateways and bind numbers will be charged according the account they currently
belong to. If the number being called does not match any rate, the call will be terminated. And
the cause of such termination will be shown in CDR. When the account belongs to other
accounts, the call will cause the agent account to be charged according to its own rate this
backtracking process ends up at accounts that belong to no other accounts . If the billing turns
the account or any of its agent accounts into disabled status, the phones, gateways and bind
numbers will no longer be able to make calls.
Billing principle: optimal rate, the deduction amount is calculated by period fee rate, account fee rate,
account private fee rate or phone private fee rate, choose the cheapest.
When account is in debt, he can still make free call.
Authorization Management
This function is used for manage agent’s operation of accounts.
Double-click Navigation Account management , select an account, click Authorizations in the Operation Details
Authorizations
Add/delete/modify account: the right to create delete or modify accounts.
Add/delete/modify phone: the right to manipulate phones belonging to the account.
Add/delete gateway: the right to manipulate gateways belonging to the account.
Modify gateway information: the right to modify information about gateways except capacity.
Modify gateway capacity: the right to modify the number of lines.
Payment for this account: the right to perform payment for the current account including
changing the amount of overdraft .
Add/delete/modify phone card: the right to manipulate phone cards belonging to the account.
Payment for sub accounts: the right to pay for the sub accounts.
This function is usually used to facilitate agent development. An agent user can have an agent-typed
account in the system. Administrators can create one or more accounts for them, limiting their rights to
recharge their own account, yet granting those authorizations to add new accounts, phones and gateways,
and to recharge their sub accounts. The agent can create new accounts for its sub-agents. The agent
account can only manipulate its sub accounts. Note that, accounts created by agent accounts must be
designated to an agent account, and the creator must have the authorization to manipulate the designated
agent account. Users logged in with an agent account can only see those accounts that authorized to the
agent. This restriction applies to all account-related operations.
Number Section Limitation
This function is used to limit the phone prefix of the account.
Double-click Navigation Account management , select an account, click
Authorizations in the .
Operation Details
Begin number: the smallest number of the segment including the number itself .
End number: the largest number of the segment including the number itself .
Number restriction specifies the phone numbers that can be added to the current account, in order to
avoid competition of number resources among agents.
If account type is agent , the numbers of its sub accounts should also be in this range. Otherwise there
will be error prompt from the system. If the account type is ordinary , the appropriate number segments
will automatically added by the system.
Operation Management
Gateway Operation
Routing Gateway
This function is used to manage routing gateway.
Double-click Navigation Operation management Gateway operation Routing gateway
Gateway name: the unique id of the device, used for the authentication of dynamic
gateways. For static gateways usually relay gateways , the only requirement is their ids
do not conflict with each another.
Gateway prefix: when the number being called is not registered in the system, the call
will be routed only to gateways which match the prefix specified here. Multiple prefixes
can be specified, separated by commas. Different gateways can be designated with the
same prefix. When conflict occurs, the gateway will be chosen according to following
numbers the smallest comes first : priority number, the ratio of the number of current
calls to the number of channels, the number of historical calls, and the gateway id.
Prefix mode:
Table Items
Extension: shorter prefixes will be tried if the routing gateway matched by this
prefix cannot deliver the call.
Expiration: no more prefixes will be tried if the routing gateway matched by this
prefix cannot deliver the call.
Examples:
If the prefix mode of gw is set to Terminal , the prefixes being tried for the number will be gw and gw in order.
If the prefix mode of gw is set to Continual , while others remain the same, the prefixes being tried for the number will be gw , gw , gw , and gw in order.
Gateway group: the group which gateway belongs to.
Reserved line: line at least to be reserved for gateway group. Group line limit will restrict
gateway line limit when this gateway belong to this group. If remaining available line of
group is below the value of reserved line, this gateway will be disabled. Means when line
resource strained, function of reserved line used to assure line resource is availble for
important customers.
Suppose that client A and client B use the same routing gateway, which has a line limit of client A
and client B have different callee prefixes . If we want to give client A and client B different priorities
as : client A is permitted to use all the lines; client B is permitted to use only lines for the most;
if client A’s concurrency is over lines, the routing gateway shuts down the service for client B and
only provide service for client A, we can do as the following.
Create gateway group G, Line limit is .
Create routing gateway A which only allow client A to pass through, line limit is , belonging to group
G and the reserved line is none .
Create routing gateway B which only allow client B to pass through, line limit is , belonging to
group G and the reserved line is .
According to the above configuration, when call can use the gateway A, concurrent gateway group G
can reach Gateway Group line limit , when call can use the gateway B, concurrent gateway group
G can not exceed Gateway Group line limit minus lines , If the gateway A current concurrency
is , the gateway B current concurrency is , the call can use the gateway A, and can not use the
gateway B. From another point of view can be considered, at the peak of the priority to protect the
ability to connect the client A, and in control of the maximum-peak concurrent client B’s.
Note that this ground if the overall concurrent gateway less than , the maximum concurrent client B
can reach . Client A and client B who call first, only to restrict client B calls, when gateway
concurrent more than .
Instructions for combination use of period capacity and reserved line
Create gateway group G, line limit is none .
Create routing gateway A, line limit is none , belonging to G and reserved line is none , gateway A’s
period capacity is that during::-::, line limit is , during ::-::, line limit is
Create routing gateway B, line limit is , belonging to G and reserved line is .
As above setting, during ::-:: every day, when gateway A is available, G’s concurrency
can reach when gateway B is available, G’s concurrency can reach , during::-::
every day, when A is available, G’s concurrency can reach . When B is available, G’s concurrency can reach .
Mapping gateway name: Set the mapping gateways which are allow/forbidden to use the routing gateway.
Lock type: No lock or Bar all calls .
Priority: when the prefixes are the same, gateway with high priority will be used firstly.
Additional settings
Configuration password: the password used for gateway registration, which is also the password used for web configuration.
Self service password: the password used for web query.
Memo: comments on the gateway.
Routing clearing account id: the billing account charged when the gateway is called.
Routing clearing account balance: the balance of the billing account.
Line limit: lines of this routing gateway.
Softswitch: specify the softswitch used by this routing gateway.
Ip: see descriptions in the Additional settings .
Caller black/white list group: can set numbers in Number management Black/white
list group .
Routing clearing account name: the name of the billing account.
Clearing billing number:
Before rewrite: consistent with this call’s billing number.
After rewrite: using the number of the rewrite rule rewritten by this routing
gateway configuration.
Other Operations
Double-click the Routing clearing account name , can directly enter to the manage interface of this account.
Current call: open the Current call list of the gateway.
Interrupt analysis: open Interrupt analysis page of the gateway.
Alarm monitor: open Alarm monitor page of the gateway.
Bilateral reconciliation: reconciliation between two platform accounts.
Random generate: generate random password of newly added gateways.
Condition monitor: monitor status of the gateway and view details in Gateway status .
Connect analysis: open Connect analysis page of the gateway.
Network test: test the network of to-end.
Total gateway: count the total number of multiple gateways.
Filling downwards: use for copy information.
Additional settings Normal
Gateway type:
Static: no registration is required. These are usually relay gateways i.e. routing
gateway . Static IP addresses and ports can be specified for them.
Dynamic: registration is required before use.
Registration: register to other server; please refer to Registration management .
Protocol: H or SIP.
Local ip: set IP of local network used for sending, use Auto to choose by Linux routing table.
Local port: set port of local network used for sending
Ip: gateway's IP.
Signaling port : gateway's port.
Media proxy:
Auto: let the system decide whether enable media proxy. Recommended
On: always enable media proxy.
Off: always disable media proxy.
RTP interrupt detection:
None: disable detection.
Server to remote: detect audio send from server to device.
Remote to server: detect audio send from device to server.
Bidirection: detect both side, if any one side no audio, the call will be interrupt.
Conversation limitation seconds : set the max call duration of the gateway.
None: no limit.
Default: set by Operation management Softswitch management Additional
settings System parameter SS_MAX_CALL_DURATION .
Switch gateway until connect:
Default: set by Operation management Softswitch management Additional
settings System parameter SS_GATEWAY_SWITCH_UNTIL_CONNECT .
On: switch gateway until softswitch got connect signal SIP OK/ HConnect .
This option priors to Protocol Stop switch gateway after olc and Stop switch gateway after receive sdp .
Off: try next gateway except: call connected, ringing, receive busy or no answer
and settings in Protocol .
Stop switch gateway when rtp start:
Default: set by Operation management Softswitch management Additional
settings System parameter
SS_GATEWAY_SWITCH_STOP_AFTER_RTP_START .
On: if using media proxy, when softswitch received RTP packet from the gateway,
won’t try next gateway any more.
This option is NOT affected by Switch gateway until connect . When Switch gateway until connect
is on, if received RTP packet, stop switch gateway.
Off: ignore the RTP starting conditions for gateway switch.
Callee busy stop switch:
Default: set by Operation management Softswitch management Additional
settings System parameter
SS_GATEWAY_SWITCH_STOP_AFTER_USER_BUSY .
On: when softswitch received busy signal from the gateway, won’t try next gateway any more.
This option is NOT affected by Switch gateway until connect . When Switch gateway until connect
is on, if received busy signal, stop switch gateway.
Off: ignore the RTP starting conditions for gateway switch.
Real time computing asr:
On: softswitch will calculate this gateway’s ASR.
Off: softswitch will not calculate this gateway’s ASR.
Default: set by Operation management Softswitch management Additional
settings System parameter SS_GATEWAY_ASR_CALCULATE .
Real time computing acd:
On: softswitch will calculate this gateway’s ACD.
Off: softswitch will not calculate this gateway’s ACD.
Default: set by Operation management Softswitch management Additional
settings System parameter SS_GATEWAY_ACD_CALCULATE .
Check rate: if the call has clearing fee rate, this gateway will be tried.
Sort by lowest rate per second: use rate per second when sorting. Sort order can be set in
Operation management Softswitch management Additional settings System
parameter SERVER_GATEWAY_ROUTE_FEE_RATE_BEFORE_QUALITY and
SERVER_GATEWAY_ROUTE_FEE_RATE_SORT_CONFIG .
Enable: during fee rate sorting, use actual fee rate.
Disable: during fee rate sorting, see the gateway has the lowest fee rate.
Lowest profit rate limit: lock this gateway when profit below settings. When the
difference, calculate by rate per second, between caller fee rate and clearing fee rate
lower than the value, this gateway won’t be tried.
Negative is supported.
Max minute rates: when minute rate above the value, this gateway won’t be tried.
Additional settings Routing prefix
Routing caller prefix:
Allow: prefixes of the caller numbers allowed to pass through left blank to allow all numbers .
Forbidden: prefixes of the caller numbers disallowed to pass through.
Only one of the Allow and Forbidden options can be chosen.
Routing callee prefix:
Allow: prefixes of the called numbers allowed to pass through.
Forbidden: prefixes of the called numbers disallowed to pass through.
Forwarding prefix:
Allow: forwarding prefixes to pass through left blank to allow all numbers .
Forbidden: disallow forwarding prefixes to pass through.
Forwarding number is in the To field of forwarding signal.
Call Restriction on Caller:
Allow: allow the caller with particular prefix to dial callee with particular prefix.
Forbidden: forbidden the caller with particular prefix to dial callee with particular prefix.
Routing caller rewrite rule: rewrite rules for the caller number when called out through this gateway.
Routing callee rewrite rule: rewrite rules for the called number when called out through this gateway.
Additional settings Period control Period rewrite rule
Weekdays: time corresponding to the week.
Mode:
Begin time: time when the rewrite rule comes into effect.
End time: time when the rewrite rule expires.
The called: the rewrite rule applies to the called number.
The caller: the rewrite rule applies to the caller number.
Rewrite rule: the content of the rule.
Additional settings Period control Period call restriction
Weekdays: time corresponding to the week.
Operation:
Begin time: time when the rule comes into effect.
End time: time when the rule expires.
Forbidden: forbidden operations for the matched prefixes.
Allow: allow operations for the matched prefixes.
By callee: matches the prefixes of the callee numbers.
By caller: matches the prefixes of the caller numbers.
Number prefix: the prefix of the number. Multiple prefixes can be specified, separated by commas.
Additional settings Period control Period capacity
Weekdays: time corresponding to the week.
Line limit: the maximum number of channels allowed for this period.
Begin time: time when the rule comes into effect.
End time: time when the rule expires.
Additional settings Period control Period priority
Weekdays: time corresponding to the week.
Priority: priority for this gateway for this period.
Begin time: time when the rule comes into effect.
End time: time when the rule expires.
Additional settings Protocol SIP
Default value is set in Operation management Softswitch management Additional settings SIP parameter .
Invite/Trying/Ringing/SessionProgress /SessionProgress SDP : if signal timeout,softswitch will try next gateway or hang up.
Invite default: set by Softswitch management Additional settings SIP parameter SS_SIP_TIMEOUT_INVITE .
Trying default: set by Softswitch management Additional settings SIP parameter SS_SIP_TIMEOUT_TRYING
Ringing defualt: set by Softswitch management Additional settings SIP parameter SS_SIP_TIMEOUT_RINGING .
SessionProgress defualt: set by Softswitch management Additional settings SIP parameter SS_SIP_TIMEOUT_SESSION_PROGRESS .
SessionProgress SDP defualt: set by Softswitch management Additional settings SIP parameter SS_SIP_TIMEOUT_SESSION_PROGRESS_SDP .
Stop switch gateway after receive sdp:
Off: won’t affect gateway switch.
On: stop switch gateway after receive SDP.
Defualt: set by Softswitch management Additional settings SIP parameter
SS_SIP_STOP_SWITCH_AFTER_SDP
If Switch gateway until connect is on, this setting is invalid.
Stop switching response code: stop switch gateway when receive this code.
Reply address: after receive sip request message, send reply signal to which address.
Socket: send reply signal to request address recommend .
Via port: send reply signal to request IP and use port from Via. Due to network
reasons, some systems will use this mode .
Via: send reply signal to address from Via. May have security risk .
Request address: after call establish, send request signal to which address.
Socket: send request signal to sender address recommend .
Contact Port: send request signal to sender IP and use port from Contact.
Contact: send request signal to address from Contact.
G negotiation mode:
Auto: keep original G codec.
G: treat Ga or G as G.
Ga: treat G or Ga as Ga.
G&Ga: treat G or Ga as G and Ga.
G annexb:
Auto: send routing’s G annexb setting to routing.
yes: annex=yes.
no: annexb=no.
None: no annexb.
Passthrough: send caller’s G annexb setting to routing.
annexa: refer to G annexb.
Enable timer protocol: enable routing gateway’s timer protocol to detect over time.
Retry-After: when routing gateway’s signalling contain Retry-After domain, the values
will determine the disabled length of gateway, disabled gateways are displayed in
Online routing gateway .
Reason: add reason head to the call's hanging signaling cancel, bye, or direct rejection
of the caller's error response for the transmission to the end of the reason head when
the end of the hanging signaling contains the reason head , or the call hanging
description that contains VOS3000 V2.1.8.0.
user=phone: add the User=phone field to invite of call request signaling.
Allow Publish: this protocol can make routing gateway control concurrency automatically.
Enable call forward signal: if call from mapping gateway uses call forward format or
phone’s call forward, then use call forward signal format to send the call.
Enable rel: send xx to routing gateway intermediate state like .
Allow t: allow send T signal to routing gateway.
After enable call forward signal, the outbound caller of CDR will be number in To field | number in From field .
Invite code: add a custom field to the invite field.
Authentication user: users authenticated.
Privacy:
Peer number information: set select mode to SIP signal’s caller.
None: no this field.
Passthrough: send received settings to routing gateway.
Id: privacy field.
P-Preferred-Identity:
None: no this field.
Passthrough: send received settings to routing gateway.
Caller: use caller number.
P-Asserted-Identity:
None: no this field.
Pass through: send received settings to routing gateway.
Caller: use caller number.
Caller rewrite rule: rewrite rules for the caller number in P-Asserted-Identity fileld.
Additional settings Protocol H
Default value is set in Operation management Softswitch management Additional settings H
parameter .
Setup/CallProceeding/Alerting/CallProceeding OLC : if signal timeout, softswitch will
try next gateway or hang up.
Setup default: set by Softswitch management Additional settings H
parameter SS_H_TIMEOUT_SETUP .
CallProceeding default: set by Softswitch management Additional settings
H parameter SS_H_TIMEOUT_CALLPROCEEDING .
Alerting defualt: set by Softswitch management Additional settings H
parameter SS_H_TIMEOUT_ALERTING .
CallProceeding OLC defualt: set by Softswitch management Additional
settings H parameter SS_H_TIMEOUT_CALLPROCEEDING_OLC .
Stop switch gateway after olc:
Off: won’t affect gateway switch.
On: stop switch gateway after receive faststart or OpenLogicalChannel H .
Defualt: set by Softswitch management Additional settings H parameter
SS_H_STOP_SWITCH_AFTER_OLC .
If Switch gateway until connect is on, this setting is invalid.
Q NumberingPlan: see H’s RFC.
Q NumberType: see H’s RFC.
Q ScreeningIndicator: see H’s RFC.
Q PresentationIndicator: see H’s RFC.
G negotiation mode:
Auto: keep original G codec.
G: treat Ga or G as G.
Ga: treat G or Ga as Ga.
G&Ga: treat G or Ga as G and Ga.
FastStart: check to enable.
HTunneling: check to enable.
Allow t: check to enable.
HInSetup: check to enable.
Additional settings Protocol DTMF
Dtmf receive: specifies the way by which DTMF signals are received. The All option
is recommended, which asks the system to accept all kinds of DTMFs. Once a certain
kind of DTMF is received, this channel will accept the same kind of DTMFs only, thus
effectively avoiding duplicate receptions.
Use peer rfc ability: rfc ability is determined by peer ability.
Dtmf send h : it is set to Auto by default, indicating that the system would
determine the best way to send DTMFs based on the receiver’s capacity. If the receiver
provides no capacity set, the system will send according to the default mode. The
RFC mode can only be specified for media proxy.
Dtmf send sip : it is set to Auto by default. The details are the same as those of Dtmf
send h described above.
Payload: the payload value in RTP, for the DTMF of the RFC mode.
Additional settings Codec H/SIP
Auto negotiation: determined by caller and callee.
Softswitch specified: codec can only be sent.
Select one codec, and then double click to add or delete.
Select some codecs, and then right click to add or delete.
For specified codec, Softswitch specified is needed.
Additional settings Others
Number length limit:
Caller number allowable length: the lengths of the caller numbers allowed to pass
through the gateway e.g. fill in , to allow numbers of digits or digits
only .
Callee number allowable length: the lengths of the called numbers allowed passing
through the gateway.
Left blank to allow numbers of all length to pass through, and fill in to allow no numbers to pass
through.
Number restriction on callee:
None: no restriction.
Phone number: allow call platform's phone numbers only.
Other number: allow call numbers except platform’s phone number.
Callee transform: use number in "Number Transformation" table to replace callee ID.
Enable phone display number: when caller is phone, check to use phone’s display
number, uncheck to use phone number.
Gateway’s rewrite rule will still be used.
Http call status notification: send the call status to the HTTP server.
Set to protect route: if set to protect route, this gateway will not be used to sort with other
gateways. Between protect routes, sort order as normal. If normal gateways are not
connected, the call will switch to protect routes. Protect route enable time can be set,
within the time call is not connected, will be send to protect routes.
Enable dynamic blacklist in standalone mode: when the dynamic blacklist run mode is
standalone, monitor blacklist dynamically on the gateway.
Allow bilateral reconciliation: VOS3000 V2.1.8.0 will check the amount deviation of customer and
vendor automatically.
Passthrough rtp lost rate: transparent media message to peer platform.
Do not disabled when timeout: routing gateway still can be used after timeout.
Enable forwarding signal rewrite pool: use number in pool as caller.
Enable caller number pool: use number in pool as caller.
Number sequence is decided by FORWARD_SIGNAL_REWRITE_SEQUENCE setting in config
file softswitch.conf
: random
: poll
Default is random
Rate limit: Restrict the number of call-establish signaling in a certain period.
Signaling tracing: Setting this gateway, call tracing, register tracing, end time. This
setting will not affected by the system Debug trace setting.
Other Operations
Double-click the content of Routing clearing account name to open the account
management page for this account.
... Mapping Gateway
This function is used to manage mapping gateway.
Double-click Navigation Operation management Gateway operation Mapping
gateway
Gateway name: see the descriptions in Routing gateway .
Lock type: see the descriptions in Routing gateway .
Line limit: the number of concurrent calls allowed by the gateway.
Softswitch: see the descriptions in Routing gateway .
Ip: see the descriptions in Additional settings .
Table Items
Call permission: see the descriptions in Phone management .
Gateway group: set the gateway’s group, used for control several gateways’ total
currency.
Routing gateway group: allow or forbidden.
Routing gateway name: set mapping gateway allow/forbidden to try those routing
gateways.
Additional settings
Account id: the number of the billing account for this mapping gateway.
Account name: the name of the billing account for this mapping gateway.
Self service password: see the descriptions in Routing gateway .
Caller black/white list group: see the descriptions in Routing gateway .
Memo: comments on this gateway.
Configuration password: see the descriptions in Routing gateway .
Priority: for static gateway with the same IP, use this priority to match.
Callee black/white list group: see the descriptions in Routing gateway .
Other Operations
Double-click the Account name , can directly enter to the manage interface of this
account.
Same as Routing gateway .
Routing analysis: open Routing analysis table.
Additional settings Normal
Gateway type:
Dynamic: registration is required.
Static: gateway mapping is achieved directly through IP addresses.
Ip: IP addresses of mapping gateways. Multiple addresses and signaling port can be
specified, separated by commas.
Process timeout seconds : the maximum time waited after the call has reached the
gateway. If the connection has not been establish within the time limit, the system server
will send a reject signal to the mapping gateway.
Default: set by Operation management Softswitch management Additional
settings System parameter SS_MAPPINGGATEWAYTIMEOUT .
None: no limitation.
Protect route enable time seconds :
Default: set by Operation management Softswitch management Additional
settings System parameter SS_TRY_PROTECT_ROUTE_DELAY .
None: no limitation.
Conversation limitation seconds :
Default: set by Operation management Softswitch management Additional
settings System parameter SS_MAXCALLDURATION .
None: no limitation.
Media proxy: see the descriptions in Routing gateway .
RTP interrupt detection: see the descriptions in Routing management .
Lowest profit rate limit: this gateway will be locked if profit below this value.
Real time computing asr: see the descriptions in Routing management .
First routing strategy:
Max minute rates: max minute rate allowed for callee number.
Real time computing acd: see the descriptions in Routing management .
None: System default.
Asr: Sort by ASR.
Lowest rate per second: sort by rate per second.
Second routing strategy: see First routing strategy .
Additional settings Mapping prefix
See the descriptions in Routing gateway .
Add prefix to the callee: add prefix for callee number by propotion.
When callee rewrite rule and add prefix to callee are present rules for same callee number
at the same time, callee will be applied by rule of callee rewrite rule at first, then rewritten
number will be added prefix by proportion.
Additional settings Period control
See the descriptions in Routing gateway .
Additional settings Protocol SIP
See the descriptions in Routing gateway .
Caller: get caller number from which field of signal.
From: get caller number from From of signal.
Remote-Party-ID: get caller number from Remote-Party-ID of signal.
Display: get caller number from Display of signal.
Callee: get callee number from which field of signal.
To: get callee number from To of signal.
Request-Line: get callee number from Request-Line of signal.
Support Privacy: pass through mapping gateway private domain.
Replace failed reason: specify the error message sent to the mapping gateway when the
call cannot be established, can define their replacement rules according to different
termination reason.
Remote ring back mode:
Recongnize call forward signal: if mapping gateway send calls in forward signal format,
call with forward format will be identified as forward call.
Passthrough: according to routing gateway.
Session Progress + SDP: when callee ringing, send Session Progress +
SDP to mapping gateway.
Alerting + SDP: when callee ringing, send Alerting + SDP to mapping
gateway.
Call authentication mode:
IP: verify IP Address.
IP Address and Port: verify IP Address and Port.
Authenticate by Password: using password authentication method.
Additional settings Protocol H
Replace failed reason: specify the error message sent to the mapping gateway when the
call cannot be established, can define their replacement rules according to different
termination reason.
Q. ProgressIndicator: see the standard reference for H. See the descriptions in
Phone management for details about signaling checkboxes.
G negotiation mode
FastStart: check to enable.
Allow t: check to include T.
Send callproceeding immediately: check to send callproceeding when receives setup.
Caller: CallingPartyNumber/SourceAddress/Display.
Callee: CalledPartyNumber/DestinationAddress.
HTunneling: check to enable.
Convert trying: check, if caller uses H and callee uses SIP, when callee returns Trying,
VOS3000 V2.1.8.0 will send callproceeding to caller.
Change sdp to alerting: check, if caller uses H and callee uses SIP, when callee
returns with SDP, VOS3000 V2.1.8.0 will send alerting to caller; Uncheck, VOS3000 V2.1.8.0 will send
callproceeding to caller.
Additional settings Protocol DTMF
See the descriptions in Routing gateway .
Additional settings Codec
See the descriptions in Routing gateway .
Additional settings Others
See the descriptions in Routing gateway .
Caller number allow length: allowed length of caller number eg. fill in , ,means
the gateway only allow -digit caller number and -digit caller number to pass
through .
Callee number allow length: allowed length of callee number.
Http call status notification: send the call status to the HTTP server.
Allow phone number billing: if caller is platform’s phone number, use account that
phone number belongs to billing.
Audio prompts for can’t connect: if calls fail to connect, system will broadcast the failure
reason.
Language name: Chinese/English.
Not recorded no hold time cdr: system will not record the cdr with no converstation time.
Passthrough rtp lost rate: transparent media message to peer platform.
Caller transform: use number in "Number Transformation" table to replace caller ID.
Allow bind number billing: if caller is bind number, use account that bind number
belongs to billing.
Allow bilateral reconciliation: VOS3000 V2.1.8.0 will check the amount deviation of customer and
vendor automatically.
Number restriction on callee:
None: no restriction.
Phone number: only platform’s phone number is allowed.
Other number: only number not platform’s number is allowed.
Enable forwarding signal rewrite pool: use number in pool as caller.
Query lrn
In American, location routing number LRN is saved in signal control point SCP . LRN is used for
number portability.
LRN server can be set in Softswitch management Additional settings System parameter
SS_LRN_SERVER_IP and SS_LRN_SERVER_PORT .
Eat prefix length: cut the number, then use left to billing.
Failure action: when query failed, Reject or Continue .
Routing using number: when set to query, indicates that the route lookup is based
on the number returned by the LRN server.
Interstate billing prefix: add prefix for interstate call.
Identify of interstate can be refereed to Number Management Lerg Data , if caller and callee’s state
are different, the call is interstate.
Undetermined billing prefix: add prefix for the calls which cannot be recognized
interstate.
Rate limit: Restrict the number of call-request in a certain period.
Signaling tracing: Setting this gateway, call tracing,register tracing,end time. This setting
without restriction of the system Debug trace setting.
... Gateway Group
This function is used to define gateway groups, which is used to limit gateways during
routing.
Double-click Navigation Operation management Gateway operation Gateway
group
Gateway group name: the name of gateway group.
Table Items
Line limit: total capacity of the gateway group.
None: means lines of all gateways included in the group are all available.
Use gateway setting: means gateway’s line limit setting will be used.
Number of routing gateway: double-click to manage.
Number of mapping gateway: double-click to manage.
Memo: additional comments.
If phone or mapping gateway’s Allow gateway groups is deleted totally, means forbidden all routing
gateways.
If phone or mapping gateway’s Forbidden gateway groups is deleted totally, means allow all routing
gateways.
... Online Routing Gateway
This function is used to query online routing gateway.
Double-click Navigation Operation management Gateway operation Online
routing gateway
Gateway name: the device id of gateway.
Gateway prefix: the prefix of gateway.
Line limit: lines of this routing gateway.
Routing asr: display current asr if routing gateway open Real time computing asr .
Call per second: display the current call rate when routing gateway rate limit is turned
on .
Registered ip: the current IP of the gateway.
Registration time: the server time of the platform's most recent registration.
Table Items
Number of calling: the number of current sessions maintained by the gateway and the
total capacity of it.
First route asr: the first asr use the routing gateway.
Routing acd: display current acd if routing gateway open Real time computing acd .
Update time: the time of the most recent confirmation that the platform is online.
Duration: the time elapsed since the most recent registration for dynamic gateways .
There is no Time elapsed item for static gateways .
Encryption type: the type of encryption used by the gateway.
Disabled time: current remaining disabled duration.
Call tracing: current call tracing status.
Local ip: send calls by this IP.
Register name: if Gateway type is Registration , then display Mark in Registration
management .
Register tracing: current register tracing status.
Softswitch name: the name of the softswitch that the gateway registered.
Current call: open the Current call page for this gateway.
... Online Mapping Gateway
This function is used to query online mapping gateway.
Double-click Navigation Operation management Gateway operation Online
mapping gateway
Gateway name: the device ID of gateway.
Number of calling: the number of current sessions maintained by the gateway and the
total capacity of it.
Line limit: lines of this mapping gateway.
Mapping acd: display current asr if mapping gateway open Real time computing acd .
Registered ip: the current IP of the gateway.
Registration time: the server time of the platform’s most recent registration.
Duration: the time elapsed since the most recent registration for dynamic gateways .
Table Items
Mapping asr: display current asr if mapping gateway open Real time computing asr .
Call per second: display the current call rate when routing gateway rate limit is turned
on.
Update time: the time of the most recent confirmation that the platform is online.
There is no Time elapsed item for static gateways.
Encryption type: the type of encryption used by the gateway.
Register tracing: current register tracing status.
Softswitch name: the name of the softswitch that the gateway registered.
Call tracing: current call tracing status.
Local ip: this item is empty, call returns from the original address.
... Mapping Gateway Network
This function is used to view the network status of mapping gateway.
Double-click Navigation Operation management Gateway operation Mapping
gateway network
Gateway name: name of mapping gateway.
Remote ip: IP address.
Network delay ms
Device id
Table Items
Network quality
Packet loss rate
... Routing Gateway Network
This function is used to view the network status of routing gateway.
Double-click Navigation Operation management Gateway operation Routing
gateway network
Gateway name: name of routing gateway.
Remote ip: IP address.
Network delay ms
Device id
Table Items
Network quality
Packet loss rate
... Gateway Status
This function is query gateway status.
Double-click Navigation Operation management Gateway management Gateway
status
Gateway name
Total calls
Trunk error
Network error
Total call time
Starting time
Table Items
Success
Callee rejected
Caller abandon
Average talk duration
Ip
.. Phone Operation
... Phone Management
This function is used to manage phone.
Double-click Navigation Operation management Phone operation Phone
management
Phone number: the number used as caller ID and the called number for the terminal.
Configuration password: the password used for terminal registration For H, will be
the HID
Display caller id: the caller ID shown at the called end.
Table Items
Remote-Party-ID to use the number of the original caller.
Display to use number in From field of SIP message.
Lock type:
No lock: none restrictions to the terminal.
Bar outgoing: the terminal is not allowed to call out.
Bar incoming: the terminal is not allowed to be called.
Bar all calls: the terminal is denied from any service.
Authorization type: when a call is initiated by this number, this type will be compared
with the Rate Type of the rate. If the Rate type of the matching rate has higher
precedence than the type specified here, the call will be denied.
The precedence of authorization is: International call Domestic call Local call Net call.
Monthly consumption: consumption so far that month.
Monthly min: consumption at least per month.
At the beginning of the month, system will calculate the cost of last month. If the phone’s consumption
less than the value, system will take off the difference.
Monthly max: consumption at most per month.
Monthly service fee: rent fee.
Take off at the beginning of month.
Billing rate: private rate of the phone.
Supplementary service
Advanced configuration
Rewrite rules can be used to implement dial local number without add area code, please refer to rewrite
rule chapter.
Routing gateway group: allow routing gateways.
Account id: editable. Designating the billing account for this terminal.
Rate of this account will be used to bill and perform authorization checks upon calling. The operator that
edits this number must have authorizations to manipulate phones of the concerned account.
Account name: non-editable. When the account number is correctly set, the
corresponding name of the account will be shown here.
Changing the account number will cause changes to the account and the number segment restrictions of
its agent.
Double-click to the account management page for this account.
DID/DDI: after the phone on line, the other numbers allowed as caller ID or callee
number.
Number only as signaling transfer,not as billing and reporting datas.
Softswitch: specify the softswitch used by this phone.
Reverse charging: if On , any call to the number will be charge on this account, instead
of the caller.
Self service password: the password used by users to login from the web and query bills.
When left blank, the Configuration password will be used.
Call in limitation: when phone is called, maximum of incoming calls.
Call out limitation: when phone is calling, maximum of outgoing calls.
Line limit: the maximum number of channels for this phone, which limits the maximum
sum of incoming and outgoing calls processed simultaneously.
Directory: number of phone's phonebook.
Caller black/white list group: see the descriptions in Routing gateway .
Memo: descriptions to this phone.
Directory limit: max number of phone's phonebook.
Callee black/white list group: see the descriptions in Routing gateway .
Supplementary service
Display caller id: display the caller's ID.
Call transfer: forward the calls.
Call forwarding unconditional: forward all calls to specified number.
Call forwarding no reply: forward calls to specified number when the call is not
answered or the phone is out of connection.
Offline forward: forward calls when phone is not online
Forward display number:
Do not disturb: reject all calls.
Call forwarding on period: forward calls in specified time period.
Call forwarding on busy: forward incoming calls when the phone is busy.
Default: Use Softswitch management Additional settings System parameter
SS_CALL_FORWARD_USING_ORIGINAL_CALLER .
Original caller: display caller’s number.
Local number: display the phone’s number.
Normal call transfer display:
Default: Use Softswitch management Additional settings System parameter
SS_CALL_TRANSFER_NORMAL_DISPLAY .
Original caller: display caller’s number.
Local number: display the phone’s number.
Ask call transfer display:
Default: Use Softswitch management Additional settings System parameter
SS_CALL_ TRANSFER_ASK_DISPLAY .
Original caller: display caller’s number.
Local number: display the phone’s number.
Polyphonic ringtone: audio file should be imported to Audio service Value added
Phone polyphonic ringtone .
Language: Chinese/English.
Audio prompts for can’t connect:
Default: Use Softswitch management Additional settings System parameter
SS_CALL_FAILED_INDICATION .
On: if calls failed connect, system will broadcast the failure reason.
Off: if calls failed connect, system will hang up the phone directly
Insufficient alarm:
Default: Use Softswitch management Additional settings System parameter
SS_ACCOUNT_INDICATION_METHOD .
Prompt balance: Use Softswitch management Additional settings System
parameter SS_ACCOUNT_INDICATION_MONEY .
Prompt duration: Use Softswitch management Additional settings System
parameter SS_ACCOUNT_INDICATION_TIME .
Off: system will not alarm insufficient.
Spots remaining duration:
Default: Use Softswitch management Additional settings System parameter
SS_CALL_ FAILED_INDICATION .
On: Use Softswitch management Additional settings System parameter
SS_CALL_ REMAIN_TIME_INDICATION .
Off: system will not broadcast the remaining duration.
Advanced configuration Normal
See the descriptions in Routing gateway or Mapping gateway .
Register type:
Static: use IP to access.
Dynamic: use register to access.
Mapping gateway: use gateway id to access.
Protocol
Ip
Local ip
Rtp interrupt detection
Try to use routing gateway when phone is offline: when the phone being called is offline,
try to find a matching route in the routing gateway.
Signaling port
Media proxy
Conversation limitation seconds
Default: set by Operation management Softswitch management Additional
settings System parameter SS_ REDIRECTOFFLINEPHONETOGW .
On: try routing gateway.
Off: won’t’ try routing gateway.
Lowest profit rate limit
Max minute rates
Second routing strategy
First routing strategy
Advanced configuration Number prefix
See the descriptions in Routing gateway .
Advanced configuration Protocol H
See the descriptions in Mapping gateway .
Advanced configuration Protocol SIP
See the descriptions in Mapping gateway .
Advanced configuration Protocol DTMF
See the descriptions in Routing gateway .
Advanced configuration Protocol Codec
See the descriptions in Routing gateway .
Advanced configuration Period control
See the descriptions in Routing gateway .
Advanced configuration Audio service
Audio service is a standalone call service device.
Advanced configuration Others
See the descriptions in Routing gateway .
... Online Phone
This function is used to query online phone.
Static phone is not shown.
Double-click Navigation Operation management Phone operation Online phone
Phone number: the number used by the terminal at registration used as the caller ID and
the called number .
Number of calling
Line limit
Call out capacity
Call out limitation
Registered ip: the remote address of the terminal used at the registration. If the
connection is establish through a firewall, this address may be a local address.
Table Items
Call in capacity
Call in limitation
Device id: Model of the device.
Protocol: the protocol used at registration SIP or H .
Registration time: the server time of the terminal’s most recent registration.
Duration: the time elapsed since the most recent registration.
Call tracing: current call tracing status.
Local ip: this item is empty, call returns from the original address.
Update time: the time of the most recent confirmation that the terminal is online.
Encryption type: the type of encryption used by the gateway.
Register tracing: current register tracing status.
Softswitch name: the name of the softswitch that the phone registered.
.. Business Analysis
... Routing Analysis
This function is used to simulate the routing process of phone or mapping gateway.
Double-click Navigation Operation management Business analysis Routing
analysis
Authentication method:
Input Items
Existing device: phone or gateway.
Static ip: IP of mapping gateway.
Device id: phone number or gateway ID depends on device type.
Device type:
Phone number
Mapping gateway
Caller: simulated caller number.
Callee: simulated callee number.
Softswitch: the name of the softswitch.
Output Items
Caller information
Device id: actual caller device name.
Device type: actual caller device type.
Routing Callee: callee after caller device’s rewrite rule.
Account id: billing account id.
Available time: maximum duration.
Routing Caller: caller after caller device’s rewrite rule.
Rate Minute : calculate by billing account’s fee rate.
Account name: billing account name.
Callee information
Serial Number: routing sequence.
Device type: callee device type trying to call.
Outbound callee: callee after callee device’s rewrite rule.
Rate deviation: difference between caller device’s fee rate and callee device’s cost.
Device id: callee device name trying to call.
Outbound caller: caller after callee device’s rewrite rule.
Rate Minute : calculate by callee device’s fee rate.
Detail: like prefix, priority, score and so on.
... Network Test
This function is used to test to a specified IP network condition.
Double-click Navigation Operation management Business analysis Network test
Remote ip: ip addresses.
Configuration port: ip port.
Local ip: local authorized ip address.
Table Items
Packet type:
Special format: test VOS3000 V2.1.8.0 production.
ICMP: test generic network type.
... Call Analysis
This function is used to analysis call problem.
Double-click Navigation Operation management Business analysis Call analysis
Serial number: the serial number of signaling interaction.
Caller signaling: content of signaling interaction with caller.
Callee signaling: content of signaling interaction with callee.
Table Items
Memo: message of softswitch.
Time: time of signaling.
Other Operations
Export: save the signaling as file.
Import: import the signaling file to do analysis.
... Registration Analysis
This function is used to analysis registration problem.
Double-click Navigation Operation management Business analysis Registration
analysis
Serial number: the serial number of signaling interaction.
Registration signaling: content of signaling interaction.
Table Items
Memo: message of softswitch.
Time: time of signaling.
... Ivr Analysis
This function is used to analysis ivr audio service.
Double-click Navigation Operation management Business analysis Ivr analysis
Serial number: the serial number of signaling interaction.
Caller signaling: content of signaling interaction.
Audio service
Input Items
Callee signaling
Time: time of signaling.
.. Current Call
This function is used to query current call.
Double-click Navigation Operation management Current call
Caller: the number of the caller.
Mapping gateway: the gateway between the caller and the softswitch.
Connect time: the time elapsed since the establishment of the connection.
Connecting duration: time elapsed from platform received to call connected.
Calling code: the voice encoding used in the session.
Caller rx video: the video traffic and package loss of caller
Callee rx audio: the video traffic and package loss of callee
Table Items
Callee: the number of the called.
Routing gateway: the gateway between the called and the softswitch.
Duration: duration of the call.
Post dial delay: time elapsed from send call to routing response.
Caller rx audio: the voice traffic and package loss of caller.
Callee rx audio: the voice traffic and package loss of callee
Caller coding: voice encodings supported by the caller acquired by analyzing the
signals .
Callee coding: voice encodings supported by the called acquired by analyzing the
signals .
Caller information: the IP and RTP IP of the caller.
Caller dtmf: the DTMF mode of the caller.
Media routing: whether the RTP is routed by servers.
Callee device name: the manufacturer of the callee device.
Callee encryption type: the encryption used by the called.
Callee information: the IP and RTP IP of the callee.
Callee dtmf: the DTMF mode of the called.
Caller device name: the manufacturer of the caller device.
Caller encryption type: the encryption used by the caller.
Softswitch ip: the IP address of the softswitch.
Total up calls
Voice samples
Caller ivr analysis
Callee ivr analysis
Disconnect call
Audio traffic
Call analysis
Registration Management
This function is used to manage registration to other platform.
Double-click Navigation Operation management Registration management
Mark: identifier of registration information. When routing gateway type is registration,
use mark as registration identification.
User name: user name used to register to the server.
Server ip: ip address of the registration server.
Additional settings:
Table Items
Authentication password: password used to register to the server.
Line limit
Signaling port: port of the registration server.
Encryption: whether to register using encryption.
Host name: server address field of SIP REGISTER/FROM/TO, use server ip as
default.
Sip proxy: address of SIP Route.
User-Agent: field of SIP User-Agent, use VOS3000 V2.1.8.0 and version as default.
Local ip: local ip address used to register.
Local port: local port used to register.
Register period:

Default: set by Operation management Softswitch management
Additional settings System parameter SS_SIPREGISTEREXPIRE .

Auto negotiation: decide by server.
Outbound caller rewrite rules
Outbound caller rewrite rules
Registeration time: time of registration.
Last error: error of last time.
Softswitch
Authentication user: username field of SIP / message, use user name as default.
Update time: time of last update.
Actual register cycle: registration cycle after negotiation.
.. Domain Management
This function is used to manage domain, which is used for Routing Gateway and Registration.
Double-click Navigation Operation management Domain management
Domain: the domain name of routing gateway or registration.
Type:
Table Items
Ip: Domain’s IP.
Dynamic: update DNS every several minutes, can be set by System management
System parameter SERVER_DNS_UPDATE_INTERVAL .
Static: won’t check DNS.
Update time: DNS last update time.
Memo
.. Prohibited Media ip
This function is used to prohibit media ip.
Double-click Navigation Operation management Prohibited media ip
Ip: prohibited media ip
Table Items
Memo
.. Softswitch Management
This function is used to manage softswitch.
Double-click Navigation Operation management Softswitch management
Access name: the name of the Softswitch.
Additional settings
Access time: the most recent access to the softswitch.
Memo: comments on the softswitch.
Table Items
Mark: named by the management platform.
Creation time: the time of first access to the softswitch.
Access ip: the IP address of the softswitch.
Synchronize data: synchronize settings of the softswitch with VOS3000 V2.1.8.0.
System information: information about the softswitch.
Current call: current sessions on the softswitch.
. Audio Service
.. Public Audio
This function is used to manage common audio file.
Double-click Navigation Audio service Public audio
Audio name: custom name of the voice file added by the user.
Table Items
Special characters like
& and .. are not allowed for the name.
Directory: the language catalogue of the audio.
Memo: comments on the voice file.
Upload file: specify the local path of the voice file for upload.
Audio file format: display the format of the uploaded voice file.
Memory size: display of the size of the voice file. indicates the file has not been
uploaded yet.
Toolbar
Filter: filter the items.
Copy: copy the selected audio information.
The actual audio file data will not be copied.
Add: add to the service.
Import: import voice files in batch mode. The voices will be automatically named
according to their file names.
Delete: delete selected .
Supported formats include WAV files KHz, bit, monophonic .
.. Internal Audio
This function is used to manage error prompt audio file.
Double-click Navigation Audio service Internal audio
Table Items
See the descriptions in Public audio .
.. Language Management
Double-click Navigation Audio service Language management
Directory name: the name of the language catalogue.
Memo: information related to the language catalogue.
Table Items
Audio number: show how many voice files are in the language.
.. Direct/Callback
... Direct/Callback Service
This function is used to define direct/callback service and billing.
Double-click Navigation Audio service Direct/Callback Direct/Callback service
Service name: name of audio service, used in Phone management Advanced
configuration Audio service
Number of menu: number of IVR menu.
Service audio: service’s private audio.
Memo
Phone number: the number of phone which uses this audio service.
Callee number group of record: record the call if callee is in the number group when
second line is connected.
Table Items
Directory: service’s language.
Additional settings: see below.
Device: service’s devices.
Caller number group of record: record the call if caller is in the number group when
second line is connected.
Call out display number: Ivr number or Caller .
Call out callee rewrite rule: rewrite rules of the called number for calls initiated by the
IVR.
Call quick display number: Ivr number or Caller number is sent the called for quick
calls.
Ringing control
First time audio delay: set the delay after which the voice will be played upon access to
the IVR Unit: second .
Access alerting time: maximum time for call-in ringing Unit: second .
Alerting end action: Connect or Hang up .
Callback
Callback delay: time waited before calling back Unit: second .
Access decline signaling: specify the rejection signal for IVR callback.
Retry times: the number of retries for unsuccessful callback.
Callback rewrite rule: the rewrite rules applied to the called number during callback.
Replace last call
Call both side at the same time
Retry interval: the time interval between two retries Unit: second .
... Direct/Callback Audio
This function is used to manage direct/callback’s audio.
Double-click Navigation Audio service Direct/Callback Direct/Callback audio
Table Items
See Public audio .
Service: audio belong to which service, blank means all services can use this audio.
... Direct/Callback Template
This function is used to define direct/callback’s template.
Double-click Navigation Audio service Direct/Callback Direct/Callback
template
Template id
Template name
Additional settings
Device
Template is used to configure service, right click to select template and apply to service.
Table Items
Number of menu
Directory
Others
... Direct/Callback Device
This function is used to manage direct/callback device.
Double-click Navigation Audio service Direct/Callback Direct/Callback device
Table Items
See Softswitch Management .
Additional settings see Audio service parameter below.
.. IP PBX
... IP PBX Service
This function is used to define IP PBX service and billing.
Double-click Navigation Audio service Ip pbx Ip pbx service
Table Items
See Direct/Callback service .
Advanced configuration
Set period audio and operations.
... IP PBX Audio
This function is used to manage IP PBX’s audio.
Double-click Navigation Audio service Ip pbx Ip pbx audio
Table Items
See Public audio .
Service: audio belong to which service, blank means all services can use this audio.
... IP PBX Template
This function is used to define IP PBX’s template.
Double-click Navigation Audio service Ip pbx Ip pbx template
Table Items
See Direct/Callback template .
... IP PBX Device
This function is used to manage IP PBX device.
Double-click Navigation Audio service Ip pbx Ip pbx Device
Table Items
See Direct/Callback template .
.. Value Added
... Value Added Service
This function is used to define Value Added service and billing.
Double-click Navigation Audio service Value added Value added service
Table Items
See Direct/Callback Service .
... Value Added Audio
This function is used to manage Value Added audio.
Double-click Navigation Audio service Value added Value added audio
Table Items
See Public audio .
Service: audio belong to which service, blank means all services can use this audio.
... Phone Polyphonic Ringtone
This function is used to manage polyphonic ringtone audio, which is used in Phone
management Supplementary service .
Double-click Navigation Audio service Value added Phone polyphonic ringtone
Table Items
See Public Audio .
... Voice Mail Audio
This function is used to manage voice mail audio, which is used in Phone management
Supplementary service .
Double-click Navigation Audio service Value added Voice mail audio
Table Items
See Public audio .
... Alarm Prompt Audio
This function is used to manage alarm prompt audio.
Double-click Navigation Audio service Value added Alarm prompt audio
Table Items
See Public audio .
... Value Added Template
This function is used to define Value Added template.
Double-click Navigation Audio service Value added Value added template
Table Items
See Direct/Callback template .
... Value Added Device
This function is used to manage Value Added device.
Double-click Navigation Audio service Value added Value added device
. Data Query
Historical data is independent, won’t be affected by configurations, e.g. delete accounts won’t
remove account’s CDR.
.. Recent CDR
This function is used to query recent CDR.
Double-click Navigation Data query Recent Cdr
Table Items
See CDR .
This function is used to quickly query out the last CDR.
.. CDR
This function is used to query CDR.
Double-click Navigation Data query Cdr
Table Items
By default, the system displays records every page. This number can be changed in
System parameter SERVER_QUERY_ONE_PAGE_SIZE .
Caller: the phone number of the caller.
Begin time: the time when the call is initiated.
Callee: the phone number of the caller.
End time: the time the call lasts.
In Normal Mode, End Time is begin time + conversation time.
In Clearing Mode, End Time is the actual stop time.
Accuracy of billing time makes the difference, e.g. call from :::. to
:::., billing duration . second, according to accuracy should treat as second,
and display :::..
Call duration: Actual duration.
Charged duration: the time used for billing, which is calculated according the Billing
Cycle specified in rate policies.
Call charges: the fee charged for this call.
Call expense: the cost of delivering this call.
Termination reason: see Appendix for details.
Mapping gateway: the ID of the gateway between the caller and the Softswitch.
Caller ip: the IP address of the caller.
Account id: the number of the account used for billing this call.
Agent id: the agent number corresponding to the billing account number used in this call.
Talk taxes: the charge of taxes for this call.
Cost taxes: the cost of taxes for this call.
Hangup side: call termination initiator.
Routing gateway: the ID of the gateway between the called and the Softswitch.
Callee ip: the IP address of the called.
Account name: the name of the account used for billing this call.
Call type: Network , Local , Domestic or International .
Call type depends on the matched fee rate’s Rate Type.
Area prefix: the prefix used for billing this call.
Incoming caller: original caller number sent to server.
Outbound callee: the called number sent to the called after the application of rewrite
rules.
Caller device name
Package duration: duration of the package used.
Billing method:
Area name: obtain the name of the prefix according to the area prefix.
Incoming callee: original callee number sent to server.
Outbound caller: the caller number sent to the called after the application of rewrite
rules.
Callee device name
Package charges: fees of the packages used.
By caller: billing on caller account.
By callee: billing on callee account.
Billing mode: billing caller device type including Phone, Gateway, Phone card .
Continue duration: Time elapsed from platform received to call connected.
Calling Call-Id: call identification within the caller signaling.
Serial number: unique identification.
Connect delay: Time elapsed from send call to routing response.
Called Call-Id: call identification within the callee signaling.
Reason: VOS3000 V2.1.8.0 will add reason filed in hangup signaling, used to transparent
peer’s reason filed which includes hangup reason.
PDD is defined as the time from send call to callee to receive signal switch routing gateway will
recalculate , see detail below:
Callee is SIP
.
Receive callee’s /
.
Receive callee’s /
.
If callee is phone, callee’s signal contains SDP
.
If callee is routing gateway and enabled Stop Switch Gateway After Receive SDP , callee’s signal
contains SDP
Callee is H
.
Receive callee’s Progress/Alerting/Connect
.
Receive callee’s ReleaseComplete UserBusy
.
Callee is phone, callee’s Q contains faststart or H contains openlogicalchannel
.
Callee is routing gateway and enabled Stop Switch Gateway After OLC , callee’s Q contains
faststart or H contains openlogicalchannel
Media Proxy Enabled
.
Callee is phone, receive callee’s RTP
.
Callee is routing gateway and enabled Stop Switch Gateway when RTP Start , receive callee’s
RTP
Corrected time: correction of the start time. Only integers are supported Unit: second
Call analysis: open the Call analysis page.
.. Payment Record
This function is used to query payment.
Double-click Navigation Data query Payment record
Account id: the paid account id.
Payment amount: the amount.
Type: Create Account , Credit or Payment .
Mode: method of the payment.
Memo: comments on the payment.
Agent name: agent name for the paid account belongs.
Table Items
Account name: the paid account name.
Account balance: the balance after payment.
Payment time: time of the payment.
Payment user: the name of the user that fulfills this payment.
Agent id: agent id for the paid account belongs.
Serial number: unique identification.
.. Bill Query
... Revenue Details
This function is used to query account’s consumption.
Double-click Navigation Data query Bill query Revenue details
Account id
Account name
Total taxes
Total charges & taxes
Local duration: total duration of CDRs which call type is Local.
Domestic duration: total duration of CDRs which call type is Domestic.
International duration: total duration of CDRs which call type is International.
Table Items
Call charges
Total duration
Local charges: total charge of CDRs which call type is Local.
Domestic charges: total charge of CDRs which call type is Domestic.
International charges: total charge of CDRs which call type is International.
Intranet charges: total charge of CDRs which call type is Net.
Total package: total charge of package’s free money amount.
Number of cdr: total number of CDRs that have call length during the statistical cycle.
Intranet duration: total duration of CDRs which call type is Net.
Package duration: total duration of package’s free duration.
... Gateway Bill
This function is used to query mapping gateway’s consumption.
Double-click Navigation Data query Bill query Gateway bill
Gateway name: corresponding to Gateway name in Mapping gateway .
Ip: address of caller.
Accound id: account number to which the gateway name belongs.
Table Items
... Phone Bill
This function is used to query phone’s consumption.
Double-click Navigation Data query Bill query Phone bill
Phone number: corresponding to Phone number in Phone management .
Account id
Billing method
Table Items
... Area Details
This function is used to query details of each area.
Double-click Navigation Data query Bill query Area details
Area prefix
Area name
Table Items
... Account Area
This function is used to query area consumption of account.
Double-click Navigation Data query Bill query Account area
Area prefix
Area name
Table Items
... Account Balance
This function is used to query account and agent’s revenue and expenditure.
Revenue is only for agent, which is the total expenditure of sub accounts.
For ordinary accounts, there will only be expenditures in the table.
Double-click Navigation Data query Bill query Account balance
Revenue
Income taxes
Taxes revenue
Expenditure taxes
Agent name
Table Items
Expenditure
Tax expenditures
Agent id
.. Cards Query
... Phone Card Bill
This function is used to query phone card bill.
Double-click Navigation Data query Cards query Phone card bill
Card name: corresponding to Active phone card in Card name .
Account id
Table Items
... Bind Number Bill
This function is used to query bind number bill.
Double-click Navigation Data query Cards query Bind number bill
Incoming caller
Card name
Account id
Table Items
.. Clearing Query
... Clearing Account Detail
This function is used to query clearing account’s consumption.
Double-click Navigation Data query Clearing query Clearing account detail
Routing clearing account id
Routing clearing account name
Table Items
... Clearing Gateway Details
This function is used to query routing gateway’s consumption.
Double-click Navigation Data query Clearing query Clearing gateway detail
Gateway name
Ip
Table Items
... Account Clearing Balance
This function is used to query account’s clearing consumption.
Display the expenditures on each account on different clearing account in order to quickly
calculate operating profits.
Double-click Navigation Data query Clearing query Account clearing balance
Clearing costs: total charge of clearing account.
Clearing duration: total duration of clearing account.
Clearing package duration: total package duration of clearing account.
Table Items
Clearing package amount: total package amount of clearing account.
. Data Report
Users can specify in the System parameter whether to generate certain data report.
The generation of reports will begin at : A.M every day.
The time of completion depends on the capacity of the server and the amount of data.
.. Bill Report
... Revenue Details Report
This function is used to query account’s consumption report.
Double-click Navigation Data report Bill report Revenue detail report
Begin time
End time
Account name: the name of the account being displayed.
Call charges: the total amount of charges.
Total duration: the total amount of session time for all calls.
Local duration: the amount of session time for local calls.
Domestic duration: the amount of session time for national calls.
Table Items
Account id: the number of the account being displayed.
Total taxes
Total charges & taxes
Local charges: the amount charged for local calls.
Domestic charges: the amount charged for national calls.
International charges: the amount charged for international calls.
Intranet charges: the amount charged for net calls.
Total package: the total consumption of gift amount.
Number of cdr: the total number of phone records.
International duration: the amount of session time for international calls.
Intranet duration: the amount of session time for net calls.
Package duration: the total consumption of free duration.
... Gateway Bill Report
This function is used to query mapping gateway’s consumption report.
Double-click Navigation Data report Bill report Gateway bill report
Gateway id: the unique id of the device, used for the authentication of dynamic gateways.
For static gateways usually relay gateways , the only requirement is that their ids do not
conflict with one another.
Ip: the IP address of the gateway.
Please refer to the descriptions in Revenue detail report for further instructions.
Table Items
... Phone Bill Report
This function is used to query phone’s consumption report.
Double-click Navigation Data report Bill report Phone bill report
Table Items
See the descriptions in Revenue detail report .
Phone number: the number used as caller id and the called number for the terminal.
Account id: the number of the account that the phone belongs to.
Billing type: whether the caller or the called is charged.
... Account Area Report
This function is used to query area consumption of account report.
Double-click Navigation Data report Bill report Account area report
Table Items
See the descriptions in Revenue detail report .
... Account Balance Report
This function is used to query account and agent’s revenue and expenditure report.
Double-click Navigation Data report Bill report Account balance report
Table Items
See the descriptions in Revenue detail report .
... Agent Income Report
This function is used to display each sub-account under the agents account make profits for
the agents.However Account Balance Report only display agents account income and
expenses overall.
Double-click Navigation Data report Bill report Agent income report
Total charges: the sum of the expenses generated by the agents sub-account.
Table Items
Total agent fees: the sum of agent cost for this sub-account's consumption.
.. Cards Report
... Phone Card Bill Report
This function is used to query phone card report.
Double-click Navigation Data report Cards report Phone card bill report
... Bind Number Bill Report
This function is used to query bind number report.
Double-click Navigation Data report Cards report Bind number bill report
.. Clearing Report
... Clearing Account Detail Report
This function is used to query clearing account’s consumption report.
Double-click Navigation Data report Clearing report Clearing account detail
report
Table Items
See the descriptions in Revenue detail report .
... Clearing Account Area Report
This function is used to query clearing account’s area consumption report.
Double-click Navigation Data report Clearing report Clearing account area
report
Table Items
See the descriptions in Revenue detail report .
... Clearing Gateway Detail Report
This function is used to query routing gateway’s consumption report.
Double-click Navigation Data report Clearing report Clearing gateway detail
report
Table Items
See the descriptions in Revenue detail report .
... Account Clearing Balance Report
This function is used to query account’s clearing consumption report.
Double-click Navigation Data report Clearing report Account clearing balance
report
Table Items
See the descriptions in Revenue detail report .
... Summary Of Financial Settlement
This function shows the consumption during the cycle.
Double-click Navigation Data report Clearing report Summary of financial
settlement
Table Items
See the descriptions in Revenue detail report .
.. Analysis Report
Total calls: total unconnected and total connected.
Fail: unconnected calls.
Success: calls with connect/busy/no answer/ringing signaling.
Ringing: callee sent SIP or H Alerting.
If callee is phone, sent SIP with SDP or H CallProceeding OLC .
If callee is routing gateway, sent SIP with SDP or H CallProceeding OLC and enable SIP Stop
switch gateway after receive sdp or H Stop switch gateway after olc .
Answered: calls with connect signaling.
Total call time: total duration.
Average call duration: average call duration.
... Mapping Gateway Analysis Report
This function is used to analysis mapping gateway.
Double-click Navigation Data report Analysis report Mapping gateway analysis
report
... Routing Gateway Analysis Report
This function is used to analysis routing gateway.
Double-click Navigation Data report Analysis report Routing gateway analysis
report
... Mapping Gateway Area Analysis Report
This function is used to analysis mapping gateway area.
Double-click Navigation Data report Analysis report Mapping gateway area
analysis report
... Routing Gateway Area Analysis Report
This function is used to analysis routing gateway area.
Double-click Navigation Data report Analysis report Routing gateway area
analysis report
... Gateway Cross Area Analysis Report
This function is used to analysis mapping gateway cross routing gateway.
Double-click Navigation Data report Analysis report Gateway cross area analysis
report
.. Report Management
This function is used to manage reports.
Double-click Navigation Data report Report management
Date: date of records in the report.
Operator: the operator that generated the report.
Table Items
Create time: the date when the report is generated.
Memo: items included in the report.
Generate all reports
Generate special report
.. Other Income Report
This function is used to query income from suite rent, phone month rent, phone under
consumption, suite under consumption.
Double-click Navigation Data report Other income report
Account id
Account name
Account balance
Type: suite rent, phone month rent, phone under consumption, suite under consumption.
Memo
Agent name
Table Items
Consumption
Time: deduction time
Consumer Source
Agent id
Serial number
Total up
. CDR Analysis
See the descriptions in Analysis report .
.. Connect Analysis
This function is used to analysis gateway connect.
Double-click Navigation CDR analysis Connect analysis
.. Interrupt Analysis
This function is used to analysis gateway interrupt.
Double-click Navigation CDR analysis Interruption analysis
.. Area Analysis
This function is used to analysis gateway area.
Double-click Navigation CDR analysis Area analysis
.. Call Distribution
This function is used to show call distribution of hours.
Double-click Navigation CDR analysis Call distribution
.. Historical Performance
This function is used to show the concurrent calls on specified date.
Unsuccessful calls are not counted here, so the number shown in the chart will be slight lower than that
in reality.
Double-click Navigation CDR analysis Historical performance
.. Gateway Performance
This function is used to show the concurrent calls of gateways on specified date.
Unsuccessful calls are not counted here, so the number shown in the chart will be slight lower than that
in reality.
The number of gateway can be set by System management System parameter
SERVER_DISPLAY_CHART_GATEWAY_SIZE .
Double-click Navigation CDR analysis Gateway performance
.. Period Connect Analysis
This function is used to analysis total calls/total response/ASR/ACD.
Double-click Navigation CDR analysis Period connect analysis
.. Gateway Area Analysis
... Mapping Area Analysis
This function is used to analysis mapping area.
Double-click Navigation CDR analysis Gateway area analysis Mapping area
analysis
... Routing Area Analysis
This function is used to analysis routing area.
Double-click Navigation CDR analysis Gateway area analysis Routing area
analysis
... Gateway Area Cross Analysis
This function is used to analysis cross area.
Double-click Navigation CDR analysis Gateway area analysis Gateway area
cross analysis
. Cards Management
.. Phone Card
This function is used to manage phone card.
Double-click Navigation Card management Phone card
Serial number: the sequence number of activated cards. The initial number can be
specified by users.
Management id: the classification of cards can be classified according to this number.
Card number: the unique id of a phone card. Card numbers of existing cards cannot be
modified.
Password: the password used for authentication in recharge.
Table Items
Function:
Create account:this card can be used to establish an account.

Active phone card:when using this card create account, to do an account and
active phone card.

Platform phone:when using this card create account, to do platform
phone ,also can set default authorization type.
Recharge:this card can be used to recharge.

Replace account billing rate group:when using this card recharge,the current
account billing rate is replaced by the set rate card.

Package joined account package order:when using this card recharge,the
account package will add the set packae card.
Money charged into the current account balance: when using this card create
account or recharge,the current balance of this account can increase the value of
card.
Money amount: the amount to be recharged.
Overdraft limit: the amount that can be overdrawn for an account generated by this card.
Negative is supported.
Billing rate: the rate used for phone card.
Package name: the name of the package used for phone card.
Multi packages are supported.
Agent id: the agent account specified in account binding for phone card.
Lock type: No Lock or Locked .
Bind number limit: when used as a calling card the number limit that allows binding.
Produce time: the date when the card is created.
Active Days : the number of days when enabled before expiration time.
Sold: manually set this feature to show if the calling card is on sale.
Display caller id: the caller ID shown at the called end.
Expire time: the date of expiration.
Enable date: the date the card was used.
Memo: descriptions of the card.
User's account name: when used, the name of the account being recharged.
User's account id: when used, the number of the account being recharged.
Batch create phone cards
See Phone card .
Number of cards: the number of cards to be created.
Money amount: the amount to be recharged.
Begin card number: the initial card number of the cards.
Password mode: whether the cards being created have passwords.
Password length: the length of the passwords. Passwords are generated automatically by
the system.
Begin serial number: the initial sequence number of the cards. The last sequence number
will be automatically determined according to the number of card to be created.
If the initial sequence number is left blank, it will be set to the number that is one plus the largest
sequence number activated up to now.
Management id
Overdraft limit
Package name
Expire time
Lock type
Card number prefix: the prefix number of the cards being created.
Billing rate
Active days : how many days will account's expiry date be extended after charging.
Bind number limit
Agent id: the agent account specified in account binding for phone cards.
This card can only be used for the agent’s sub-account when setting the agent account.
Memo
Related Instructions
Phone card as account cards case.
The active day of this phone card is days, when using this card create account ,the
account is valid for phone card expire time.
The active day of this phone card is N days,when using this card create account ,
the account is valid for the current time extended N hours.
Phone card as recharge cards case.
If the extened mode was specified as Superposition in System management
System parameter
SERVER_PAY_PHONE_CARD_CUSTOMER_EXPIRE_DAY_MODE , If
phone card’s active days is N, the account’s valid time will be extended N
hours after recharge, from the current time.
If the extened mode was specified as Standard in System management System
parameter
SERVER_PAY_PHONE_CARD_CUSTOMER_EXPIRE_DAY_MODE .

If phone card’s active days is , if the expiration date extension is specified
in System management System parameter
SERVER_PAY_DELAY_CUSTOMER_EXPIRE_DAY , the expiration date
of an account will be re-calculated accordingly after recharge.

If phone card’s active days is N, the account’s valid time will be extended
N hours, from the current time.then the expiration date of an account will
be re-calculated accordingly compared to original expired time of account.
.. Active Phone Card
This function is used to manage active phone card.
Double-click Navigation Card management Active phone card
Card number
Display caller id
Number of bind number
Account id
Memo
Table Items
Password
Enable date
Bind number limit
Account name
.. Bind Number
This function is used to manage bind number.
Double-click Navigation Card management Bind number
Phone number
Display caller id: can be set according to callee.
Directory
Card number
Table Items
Rewrite rule
Enable date
Account id
Memo
. Alarm Management
Alarm severity: General/Minor/Major/Critical.
Upper: upper bound which trigger the alarm.
Email alarm: can be set by System management System parameter
SERVER_ALARM_ENABLE_EMAIL .
Email: can be set by System management System parameter
SERVER_ALARM_EMAIL .
Lower: lower bound which trigger the alarm.
Period: detection period.
.. Alarm Settings
... System Alarm
This function is used to monitor system.
Double-click Navigation Alarm management Alarm settings System alarm
Monitor device
Table Items
Alarm Type:
Account call duration too long: alarm if the account call duration is greater than the
set value.
Call duration: alarm if the maximum time of the current call is greater than the set
value.
Clock deviation: used to monitor the time deviation between master and salve
server.
Cpu: alarm when CPU utilization is greater than set value during the detection
cycle.
Database: monitor all errors in the database except for primary key conflicts and
trigger alarms.
Host state conflict: alarm if the host state is conflict.
Illegal call: alarm when the number of illegal calls during the detection cycle is
greater than the set value.
Login mac Restricted: when set User management Verify client mac in
"Trigger alarm" , the alarm is triggered if the client logs on to the mac that is
inconsistent with the data in the configured client mac list.
Master synchronize status: alarm when host synchronization stops working.
Memory: alarm when memory usage is greater than set value during the detection
cycle.
Pending cdr: the server receives CDR and calculates CDR using an asynchronous
mechanism to generate this alarm when the server is unable to process the stacked
CDR in a timely manner.
Slave synchronize status: alarm when standby synchronization stops working.
Standby enable: this setting is valid when there is a hot standby module.
... Network Alarm
This function is used to monitor network.
Double-click Navigation Alarm management Alarm settings Network alarm
Monitor device
Network device
Alarm type:
Table Items
Bytes receive
Bytes transmit
Packages receive
Packages transmit
Receive package error
Transimit package error
... Disk Alarm
This function is used to monitor disk.
Double-click Navigation Alarm management Alarm settings Disk alarm
Monitor device
Device id
Alarm type:
Table Items
Disk usage
... Process alarm
This function is used to monitor process.
Double-click Navigation Alarm management Alarm settings Process alarm
... Mapping Alarm
This function is used to monitor mapping gateway.
Double-click Navigation Alarm management Alarm settings Mapping alarm
Begin time
End time
Gateway name
Table Items
Alarm type:
Mapping asr
Mapping acd
Mapping concurrency decline
Mapping gateway concurrent rise
Mapping gateway call rate
Mapping bilateral reconciliation deviation
Mapping packet loss rate
... Routing Alarm
This function is used to monitor routing gateway.
Double-click Navigation Alarm management Alarm settings Routing alarm
Begin time
End time
Gateway name
Table Items
Alarm type:
Routing asr
Routing acd
Routing gateway concurrent rise
Routing concurrency decline
Routing gateway call timeout times
Routing bilateral reconciliation deviation
Routing packet loss rate
... Balance Alarm
This function is used to monitor account balance.
The number of customer can be set by System management System parameter
SERVER_ALARM_CUSTOMER_BALANCE_MAX_SIZE .
Double-click Navigation Alarm management Alarm settings Balance alarm
... External Device Alarm
This function is used to monitor external device.
Double-click Navigation Alarm management Alarm settings External device
alarm
.. Current Alarm
This function is used to manage current alarm.
Double-click Navigation Alarm management Current alarm
Alarm severity
Alarm object
Alarm end
Upper
Ack user
Information
Table Items
Alarm type
Alarm begin
Alarm value
Lower
Ack time
Memo
Confirm: input memo to confirm alarm.
Empty: clear current alarm, and then change the alarm into history.
.. History Alarm
This function is used to query history alarm.
If the current alarm, which is stopped, occurs again, the former alarm will be become history alarm.
Double-click Navigation Alarm management History alarm
Alarm severity
Alarm type
Alarm begin
Alarm value
Lower
Ack time
Table Items
Alarm object
Alarm end
Upper
Ack user
Memo
Cleared user
Cleared time
. System Management
.. User Management
This function is used to manage user.
Double-click Navigation System management User management
Login name: the id used for login.
User password: the login password.
User type:
Table Items
User name: the name of the user.
Administrator: users with all authorizations.
Operator: users with certain authorizations for operations.
Agent: users that are only allow viewing the accounts, rate and service packages.
Lock type:
No lock: user permissions can be used normally.
Locked: user permission cannot be used.
Authorization: see below.
Invaild time: after this time the user is not allowed to log in, the login user is often used
for temporary.
Verify client mac:
Off: Does not verify client network card Mac address.
Trigger alarm: if someone login VOS3000 V2.1.8.0 with a network card Mac address which is not
in Client Mac List,an alarming will be trigger when configured Login Mac
Restricted warming in System Alarm.
Ban login: forbid user to login VOS3000 V2.1.8.0 if the login client has a network card Mac
address which is not in Client Mac List.
Client mac list: fill in network card Mac address.
Dynamic password: choose user and right click to enable or close this feature.
Memo: comments about the user.
There will be an Extraction code window after you enable this feature, bind app with Extraction
code , then you can use dynamic password to login VOS3000 V2.1.8.0 client.
App download link: http://www.kunshinetwork.com/chs/support/downloads/VOS3000 V2.1.8.0_otp.apk
Last login: last login time.
Current client mac: display the current login client’s network card Mac address.
Select navigation: define user’s navigation tree.
Navigation preview: preview user’s navigation tree, double click to change privilege
view or editable .
Detailed privilege: display the detailed content of navigation tree, double click to change
privilege view or editable .
Operation authorization: define the allowed operation privilege by user.
Last change password: last change password time.
Users can specify interfaces and operations available for a non-administrator user. All settings come into
effect immediately.
Authorization template: several templates for authorizations are provided. Users can
select a template and then tune the configurations.
Users of the agent type who have the authorization to create users will be able to see all the users they
created in the table, while other users are invisible to them. It is the same when they specify the
availability of rates, packages, and accounts to other users.
Change password
Password requirements:
at least characters at least characters for administrator
at least of the following character combination:
at least one lowercase letter
at least one uppercase letter
at least one number
at least on special character:
and space space
cannot be used as starting or ending character.
cannot be the same as the name or the reverse of name
.. System Log
This function is used to query system log.
Double-click Navigation System management System log
Type: Information/General/Error
Operating User
Detail
Table Items
Record time: log time.
Event
Serial number
Right Click Menu
Detail
This function is used to show operating user and operation’s detail.
.. System Parameter
This function is used to configure parameters.
Double-click Navigation System management System parameter
Parameter name
Parameter description
Table Items
Parameter value
.. Work Calendar
This function is used to define working and non-working hours.
Double-click Navigation System management Work calendar
Table Items
Calendar name
Memo
Work Calendar
This function is used to match the use of the account "Suppressing all duration too long".
.. System Information
This function is used to show server’s information.
Double-click Navigation System management System information
.. Data Maintenance
... System Log Tables
Double-click Navigation System management Data maintenance
Table name: suffix is the date of system log.
Data volume: number of records.
Table Items
Memo
... History Alarm Tables
Double-click Navigation System management Data maintenance
Table name: suffix is the date of history alarm.
Data volume: number of records.
Table Items
Memo
... Payment Record Tables
Double-click Navigation System management Data maintenance
Table name: suffix is the date of payment record.
Data volume: number of records.
Table Items
Memo
... CDR Tables
Double-click Navigation System management Data maintenance
Table name: suffix is the date of CDR.
Data volume: number of records.
Table Items
Memo
... Other Income Report Tables
Double-click Navigation System management Data maintenance
Use Filter to get current settings.
If auto cleanup is enabled, VOS3000 V2.1.8.0 will cleanup out of date data every day, including
account/account’s gateway/account’s phone.
Usage
... Data Report Tables
Double-click Navigation System management Data maintenance
Table name: suffix is the date of report.
Data volume: number of records.
Table Items
Memo
... Automatically Cleanup
Double-click Navigation System management Data maintenance
Use Filter to get current settings.
If auto cleanup is enabled, VOS3000 V2.1.8.0 will cleanup out of date data every day, including
account/account’s gateway/account’s phone.
Usage
.. Online User
This function is used to query online user.
Double-click Navigation System management Online user
.. Operation Performance
This function is used to monitor system performance.
Double-click Navigation System management Operation performance
.. Process Monitor
This function is used to monitor process.
Double-click Navigation System management Process monitor
Usage
Monitor device
Process name
Automatically restart
On:When process stop not stoped by manual ,system will restart this process
Off:When process stop,system don’t do anything
Status
Memo
.. Server Monitor
This function is used to monitor server.
Double-click Navigation System management Server monitor
Right click menu
Synchronize data
System performance:current status about cpu,network,memory and hard disk
System information:cpu,network,hard disk,ram,time,os and process details information
. Number Management
.. Number Section Query
This function is used to query number section.
Double-click Navigation Number management Number section query
Begin number
End number
User’s account name
Table Items
User’s account id
.. Area Information
This function is used to define area prefix’s area name, country code, dialing prefix.
This setting will be used in rate management to show prefix’s area name, using longest match.
Double-click Navigation Number management Area information
Area prefix
Area name
Table Items
Memo
.. Number Transform
This function is used to manage number transform.
Double-click Navigation Number management Number transform
.. Black/White List Group
This function is used to define list group.
This setting will be used in caller/callee black/white list group of routing gateway, mapping
gateway and phone.
Black/white list group is full match, more efficient than prefix match.
For a large number match, use this function instead of prefix match.
Double-click Navigation Number management Black/White List Group
Black/white list group: name of the group.
Table Items
Memo
Other Operation
Double click black/white group to edit number list.
.. System White List
This function is used to manage system white list.
Double-click Navigation Number management System white list
Phone number
Table Items
Memo
.. Dynamic Black List
This function is used to manage system black list.
Double-click Navigation Number management Dynamic black list
Phone number
Effective date
Last call time
Double-click Navigation Operation management Softswitch management
Additional settings System parameter
Table Items
Type: malicious call or no answer.
Expiration time
Softswitch
Configure
. Interface Management
.. Web Access Control
This fucntion is used to manage external access ip.
Double-click Navigation Interface management Web access control
Table Items
Web service equipment
Directory name
Memo
Ip allow access
.. Web Service Equipment
This function is used to query web service equipment.
Double-click Navigation Interface management Web service equipment
Table Items
Access name
Additional setting
Access time
Memo
Mark
Creation time
Access ip
. Disaster Recovery System
.. Disaster Tolerance Status
Double-click Navigation Disaster recovery system Disaster tolerance status
Table Items
Access name: installed disaster tolerance equipment device name.
Mark
Status: status on master or slave
Local ip
Server id
Group name
Swich remaining time: if master server disconnect,slave server start remaining time
Remote ip
Master: master server ip
Logical device: network card device name
Lock
.. Disaster Tolerance Data
You can view mysql data from master server and slave server.
Slave server data can sync to master server data.
Double-click Navigation Disaster recovery system Disaster tolerance data
.. Disaster Tolerance Equipment
Double-click Navigation Disaster recovery system Disaster tolerance equipment
Table Items
Access name: installed disaster tolerance equipment device name.
Creation time
Access ip
Mark
Additional settings
Access time
Memo
. Operation Wizard
This function is used to quickly configure data.
Mapping gateway  routing gateway
Mapping gateway  phone
Phone  phone
Phone  routing gateway
. Tools
.. Customer Fee Rate Automatically Create
This function is used to create fee rate automatically.
Double-click Navigation Tools Customer fee rate automatically create
Table Items
Rate prefix
Area Prefix
Base fee rate:
Supplier fee rate:
Rate type
Area name
Desired profit
Customer fee rate
Compare files
.. Compare Fee Rate Group Minute Cost
This function is used to compare fee rate group.
Double-click Navigation Tools Compare fee rate group minute cost
Table Items
Rate prefix
Area prefix
Area name
Rate type
. Other Operation
.. Debug Trace
This function is used to track call signaling.
Click System Debug trace
Check On to enable track, uncheck to disable.
Trace length: calculate from current time, stop track when timeout. Uncheck to track all
the time.
File size limit: size of the signaling file. If over the limitation, file will be recovered.
Usage
After enable track, right click in Current call or Cdr to see call analysis.
System uses files to record track signaling, so the actual space will be double. If one file over the file
size limit, system will use the other file.
All track signaling will be saved, unless file has been covered.
.. Local Settings
This function is used to configure client settings.
Click System Local settings
Minimize: status bar/System tray
Enable voice alarm: customer alarm audios.
Enable update prompt: click to enable.
Usage
No operation automatically locked
Recover default settings
.. Lock System
This function is used to hide client interface.
Click System Lock system
Function
.. Product Instruction
This function is used to show product instruction.
Click System Product instruction
Supplement
Supplement
About This Chapter
This chapter introduces the characteristics of VOS3000 V2.1.8.0 interface.
. Interface Description
.. Filters
The wildcard characters and ? can be used to specify filter criteria. For example, the
filter criterion indicates all strings starting with , and the filter criterion
?? represents all -digit strings that start with and end with .
Use and ? to filter themselves, other characters have no transferred meaning.
The time of filter criteria in CDR and related spreadsheets can be specified according to either
Beginning of the call or End of the call . When Beginning of the call is specified, then
calls started in the specified time span will be matched. Otherwise, calls ended in the specified
time span will be matched. Usually, operators use the time of the End of the call to classify
calls.
.. Shortcuts
F: Enable filtering
CTRL + C: Copy the selected table cells
ALT + F: Open Rate management
ALT + K: Open Shortcuts
ALT + S: Open Package management
ALT + D: Open Mapping gateway
ALT + G: Open Routing gateway
ALT + C: Open Account management
ALT + P: Open Phone management
Supplement
ALT + A: Open Current call
ALT + H: Open Cdr
ALT + U: Open User management
ALT + L: Open System log
.. Cell Colors
Colors of Table Cell
White: Normal
: To be added after clicking the apply button
: To be modified after clicking the apply button
: To be deleted after clicking the apply button
: Selected
: Operation failed
Colors of Gateway Table Cell
: Bar outgoing/incoming calls
: Bar all calls
: Conflict IP address configurations for mapping gateways
Colors of Account Table Cell
: Insufficient balance
: Account terminated
.. Floating Icon
users with the query authority except agent, will see the floating icon as following:
Top: server ip
Left bottom figure: shows current concurrency
Right bottom figure: shows queue length of cdr to be processed
Supplement
. System Description
.. Rewrite Rule
Original Prefix: prefix before rewrite.
Target Prefix: prefix after rewrite.
表 - Rewrite Rule Description
Original Prefix
Target Prefix
Number
Number after
Rewrite
Memo
do not rewrite
prefix
remove prefix


add prefix

change number
with prefix
into

add prefix

delete all
number

change all
number into

or
or…
change number
into one of
to

?
or
or…
? will become a
random number

;
-;
?
or
number
between
and
or
?
randomly
choose one of
the rules, then
rewrite
Supplement
Original Prefix
Target Prefix
Number
Number after
Rewrite
Memo
??
for original
prefix, there can
be any two
digits between
and
means keep
and not rewrite
the position
Multiple substitution targets can be specified, separated by the symbol ; .
When the symbol ? exists in the substitution targets, each ? will be replaced by randomly
generated digit. The ? can occur more than once in the target pattern.
When multiple Rewrite Rules exist, the longest matching pattern will be selected. For
example, if there are two Rewrite Rules: one replaces with , while the other replaces
with , then the number will be replaced with
since is longer than .
The pattern has the lowest priority and will only be matched when there are no other
matching patterns.
Escape character: L, E ,G
L: if character behind L is a number, means the number length will shorter than the specified
value. For example:L represents all -digit numbers that start with prefix
E: if character behind L is a number, the number length will equal the specified value.
For example: G represents all - digit numbers that start with prefix
F: if character behind F is a number, the number length will longer than the specified value.
For example:G represents all - digit numbers that start with prefix
Note : escape character with backslash before /L,/E,/G has no transferred meaning.
.. Media Proxy
Parameters below can be set in Operation management Softswitch management
Additional settings System parameter .
See SS_MEDIAPROXYMODE:
On: Enable Media Proxy.
Auto: decide by softswitch, see below.
Off: Disable Media Proxy.
步骤 If caller or callee disabled media proxy, then disable.
步骤 If caller or callee enabled media proxy, then enable.
步骤 If callee enabled local ring, then enable.
步骤 If phone and gateway use dynamic register and encrypt, then enable.
Supplement
步骤 If SS_MEDIAPROXYBETWEENNET is on, caller and callee from different network, then
enable.
步骤 If SS_MEDIAPROXYBEHINDNAT is on.
If phone and gateway in the same NAT, SS_MEDIAPROXYSAMENAT is on, then enable.
If phone and gateway in different NAT, one of them in private network, then enable.
步骤 Finally, disable.
----End
.. Routing Gateway Sorting
Use callee to find routing gateway.
Parameters below, start with SS_ , can be set in Operation management Softswitch
management Additional settings System parameter .
Parameters below, start with SERVER_ , can be set in System management System
parameter .
步骤 Match longest prefix
步骤 Priority the smaller the higher
步骤 If SS_GATEWAYASRROUTESORTCONFIG is Before Line Usage, then sort by route’s
ASR. Routings which disabled real-time computing ASR priory than enabled one.
If SS_GATEWAYFEERATEROUTESORTCONFIG is Before Line Usage, then sort by
routing gateway’s Lowest Rate per Second. Gateway which disabled Sort by Lowest Rate per
Second is prior than enabled.
If the above parameter values are the same, then sort by
SS_GATEWAYFEERATEROUTEBEFOREASR.
步骤 Sort by Line Usage
If SS_GATEWAYASRROUTESORTCONFIG is Before Current Day Total Call, then sort by
route’s ASR. Routings which disabled real-time computing ASR priory than enabled one.
If SS_GATEWAYFEERATEROUTESORTCONFIG is Before Current Day Total Call, then
sort by routing gateway’s Lowest Rate per Second. Gateway which disabled Sort by Lowest
Rate per Second is prior than enabled.
If the above parameter values are the same, then sort by
SS_GATEWAYFEERATEROUTEBEFOREASR.
步骤 Sort by Current Day Total Call
If SS_GATEWAYASRROUTESORTCONFIG is Before Gateway ID, then sort by route’s
ASR. Routings which disabled real-time computing ASR priory than enabled one.
If SS_GATEWAYFEERATEROUTESORTCONFIG is Before Gateway ID, then sort by
routing gateway’s Lowest Rate per Second. Gateway which disabled Sort by Lowest Rate per
Second is prior than enabled.
If the above parameter values are the same, then sort by
SS_GATEWAYFEERATEROUTEBEFOREASR.
步骤 Sort by Gateway ID
----End
If caller phone or mapping gateway set first routing strategy or second routing strategy, then uses all
available routing gateways, according to selected strategy.
Supplement
.. Package Billing Order
步骤 Use Free Duration.
See time span of the free duration, the longer the later.
See invalid time, the earlier the prior.
See effective date, the earlier the prior.
步骤 Use Free Money Amount
See rent type, prior is Day Month Year .
See invalid time, the earlier the prior.
See effective date, the earlier the prior.
步骤 Use Account Money
----End
.. Parameter Description
... VOS3000 V2.1.8.0 Parameter
Parameter Name
Default Value
Parameter Description
EXTERNAL_WEB_SEND_
PHONE_ONLINE
Off
Interface: phone
online/offline transfer
EXTERNAL_MAX_CDR_P
ENDING_SIZE
Interface: queue size of
resend cdr EXTERNAL_SEND_CDR
Off
Interface: send cdr
SERVER_ALARM_CUSTO
MER_BALANCE_MAX_SI
ZE
Number of accounts in
Navigation Alarm
management Alarm
settings Balance alarm
SERVER_ALARM_DATA
BASE_IGNORE_ERROR_
CODE
SERVER_ALARM_DISAB
LE
Database error code without
warning
Off
Off: enable alarm.
On: disable alarm.
SERVER_ALARM_ES
Default e setting in
Navigation Alarm
management Alarm
Setting
SERVER_ALARM_EMAIL
Default email setting in
Navigation Alarm
management Alarm
Setting
SERVER_ALARM_EMAIL
_DELAY
Unit: second. Interval for
email alarm.
Maintenance
Parameter Name
Default Value
Parameter Description
SERVER_ALARM_ENAB
LE_EMAIL
Off
Default email alarm setting
in Navigation Alarm
management Alarm
Setting
SERVER_ALARM_ENAB
LE_VOICE
Off
Voice alarm
SERVER_BILLING_CUST
OMER_DEFAULT_FEERA
TE
Default fee rate group for
HW interface
SERVER_BILLING_FEE_P
RECISTION
.
Billing money accuracy
SERVER_BILLING_FEE_
UNIT
.
Billing money unit SERVER_BILLING_FORW
ARD_PREFIX
Billing prefix for Call
Transfer
SERVER_BILLING_FREE
_ES
Service Number for free, no
time limit
SERVER_BILLING_FREE
_TIME
SERVER_BILLING_GATE
WAY_ROUTE_PREFIX
SERVER_BILLING_HOLD
_TIME_PRECISION
Unit: second. Charged
Duration will cut this value,
but won’t change
conversation time.
Routing gateway additional
prefix, e.g. set , then if
callee is , will be
charged as in CDR
SERVER_BILLING_NO_C
DR_ES
Unit: million second. Time
precision, e.g. set , if
duration is .s, then
uses s, else if duration is
., then uses s.
See
SERVER_BILLING_FREE
_ES, but these numbers
won’t create CDR
SERVER_BILLING_PREV
ENT_OVERDRAFT_ADV
ANCE_TIME
Account anti overdraft
advance the number of
minutes each time minutes
SERVER_BILLING_PROFI
T_CALCULATE
Call charges Sub Call
expense
Call profit calculation
Maintenance
Parameter Name
Default Value
Parameter Description
SERVER_BILLING_RECO
DR_SERVER_HANG_UP
On
Valid when
SERVER_BILLING_RECO
DR_ZERO_HOLD_TIME is
on. If
SERVER_BILLING_RECO
DR_SERVER_HANG_UP
is off, hold time is and
hang up by server, the CDR
won’t be saved.
SERVER_BILLING_RECO
DR_ZERO_HOLD_TIME
On
If system is under attack,
turn off this to reduce
process load
SERVER_BILLING_RECO
RD_ILLEGAL_CALL
On
Illegal call: caller’s IP
cannot find in mapping
gateways and caller’s
number cannot find in
phones.
SERVER_BILLING_USE_
ROUTING_GATEWAY_P
REFIX
SERVER_CALL_HELPER_
E
Call helper number, can be
used with
SERVER_BILLING_FREE
_ES
SERVER_CDR_FILE_WRI
TE_INTERVAL
None
Additional write call record
file, the new file created time
interval seconds SERVER_CDR_FILE_WRI
TE_MAX
Additional write call record
file, the maximum number
of reserved file SERVER_CDR_REAL_TI
ME_REPORT_SERVER
Additional send call record
to server address
SERVER_DATABASE_VE
RSION
Version of data
SERVER_DISPLAY_CHA
RT_GATEWAY_SIZE
Gateway number in
Gateway Performance and
Period Connect analysis
SERVER_DISPLAY_CUST
OMER_ALARM_MONEY
In account management , if
current balance below the
value, color of the row will
be changed
SERVER_DISPLAY_MON
EY_PRECISION
Money Precision, e.g. set
value , then will be
shown as ..
Maintenance
Parameter Name
Default Value
Parameter Description
SERVER_DNS_UPDATE_I
NTERVAL
Unit: second. Used for
Domain management
SERVER_GATEWAY_RO
UTE_PREFIX
Routing additional routing
prefix, separated by
commas.
SERVER_IPPBX_DEFAUL
T_LANGUAGE
chinese
Default language of ip pbx
service
SERVER_LOGIN_FAILED
_DISABLE_TIME
Time of disable user login
when failed several
times seconds SERVER_E_NON_STA
NDARD_PREFIX
SERVER_MAIL_CUSTOM
ERE_BILL
If caller is phone and
SERVER_E_INTERNA
TIONAL_CALLEE_REBUI
LD is on, before routing,
callee number will omit this
prefix. This parameter won’t
change callee number.
Off
SMTP Send Account
Consumption Email
Automatically.
Account management
Customer Information
Email
SERVER_MAIL_REPORT_
DAY_OF_WEEK
Monday
Account management
Customer Information
Email Report Sending
Mode Weekly
SERVER_MAIL_SMTP_FR
OM
...
Email sender’s IP
SERVER_MAIL_SMTP_FR
OM_USER
kunshinetwork Limiteddemo
Smtp sender
SERVER_MAIL_SMTP_SE
RVER
...
SMTP Server IP
SERVER_MAIL_SYSTEM
_NOTICE
System notification email
address
SERVER_MAX_CDR_PEN
DING_LIST_LENGTH
Length of cdr queue limit
SERVER_MAX_INFO_ON
E_MESSAGE
Max Send Number per time
when Data Changed
SERVER_MGC_EQUIPME
NT_IPS
Reliable equipment ip
Maintenance
Parameter Name
Default Value
SERVER_MGC_EXTERN
AL_IPS
Parameter Description
External interface device ip
SERVER_NTP_SERVER
time-a.nist.gov
Network time server sntp
SERVER_PASSWORD_LE
NGTH
Default Length of Password
SERVER_PASSWORD_TE
RMINAL_ADDITIONAL_
CHARACTERS
Additional characters for
phone and gateway random
passwords. Default: SERVER_PAY_DELAY_C
USTOMER_EXPIRE_DAY
SERVER_PAY_NORMAL_
EXPIRE_ACTIVE_DISCO
UNT
Deduct Original Amount
Percent, when Normal
Recharge to Expired
Account
SERVER_PAY_NORMAL_
EXPIRE_ACTIVE_FEE
Deduct Fee per Day, when
Normal Recharge to Expired
Account Dollar
SERVER_PAY_PHONE_C
ARD_EXPIRE_ACTIVE_D
ISCOUNT
Deduct Original Amount
Percent, when use phone
card to Recharge Expired
Account
SERVER_PAY_PHONE_C
ARD_EXPIRE_ACTIVE_F
EE
.
Deduct Fee per Day, when
use phone card to
Recharge Expired
Account Dollar
SERVER_PAY_PHONE_C
ARD_PAY_RELATE_TO_
AGENT
Off
Charge Agent Accounts,
which Use Lower Rate, at
the same time, when
customers use Phone Card to
do charge.
SERVER_PHONE_AS_CA
LLEE_MONEY_VERIFY
on
Verify callee phone account
balance
SERVER_PHONE_CARD_
AUTO_UNBIND_HOUR_I
N_DAY
Checking time for phonecard
account automatic unbind
SERVER_PHONE_CARD_
AUTO_UNBIND_REMAIN
_MONEY
None
Remain money for
phonecard automatic unbind
SERVER_PHONE_CARD_
CONSUMPTION_PRECIST
ION
.
Phone card billing precision
Unit: day.
Extend the validity after
recharge
Maintenance
Parameter Name
Default Value
Parameter Description
SERVER_PHONE_CARD_
CONSUMPTION_UNIT
.
Phone card billing unit
SERVER_PHONE_DEFAU
LT_LANGUAGE
Call Helper Default
Language Code
SERVER_PSTN_PREFIX
PSTN Call Prefix
SERVER_QUERY_CDR_D
ENY_TIME
No CDR Query Time
hour e.g. ,,,,,
SERVER_QUERY_CDR_M
AX_DAY_INTERVAL
Maximum Interval for CDR
Inquiry Day
SERVER_QUERY_MAX_
ONE_PAGE_SIZE
Maximum Number of Data
per Page
SERVER_QUERY_MAX_S
IZE
Data Query Limit Item
SERVER_QUERY_NON_P
AGABLE_MAX_LINES
Non pagable table,
maximum lines per page
SERVER_QUERY_ONE_P
AGE_SIZE
Number of Data per
Page Item
SERVER_REPORT_AGEN
T_INCOME
On
Automatically generates
agent income report
SERVER_REPORT_CLEA
RING_CUSTOMER_FEE
Off
Auto Generate Clearing
Account Details Report
SERVER_REPORT_CLEA
RING_CUSTOMER_IO
Off
Auto Generate Account
Clearing Balance Report
SERVER_REPORT_CLEA
RING_CUSTOMER_LOCA
TION_FEE
Off
Auto Generate
Clearing-Account Area
Details Report
SERVER_REPORT_CLEA
RING_GATEWAY_FEE
Off
Auto Generate Clearing
Gateway Details Report
SERVER_REPORT_CUST
OMER_FEE
On
Auto Generate Revenue
Details Report
SERVER_REPORT_CUST
OMER_IO
Off
Auto Generate Account
Balance Report
SERVER_REPORT_CUST
OMER_LOCATION_FEE
On
Auto Generate Account Area
Detail Report
SERVER_REPORT_GATE
WAY_CROSS_LOCATION
_ASR_ACD
Off
Automatically generate
gateway cross area analysis
report
SERVER_REPORT_GATE
WAY_FEE
On
Auto Generate Gateway Bill
Report
Maintenance
Parameter Name
Default Value
Parameter Description
SERVER_REPORT_GATE
WAY_MAPPING_ASR_AC
D
Off
Auto Generate Mapping
Gateway Connect Analysis
Report
SERVER_REPORT_GATE
WAY_MAPPING_LOCATI
ON_ASR_ACD
On
Automatically generate
mapping gateway area
analysis report
SERVER_REPORT_GATE
WAY_ROUTING_ASR_AC
D
Off
Auto Generate Routing
Gateway Connect Analysis
Report
SERVER_REPORT_GATE
WAY_ROUTING_LOCATI
ON_ASR_ACD
On
Automatically generate
routing gateway area
analysis report
SERVER_REPORT_PHON
E_CARD_E_FEE
On
Automatically generate bind
number bill report
SERVER_REPORT_PHON
E_CARD_FEE
On
Automatically generate
phone card bill report
SERVER_REPORT_PHON
E_FEE
On
Auto Generate Phone Bill
Report
SERVER_REPORT_TIME_
ZONE_LOWER
Minimum accounts time
zone milliseconds
SERVER_REPORT_TIME_
ZONE_UPPER
Maximum accounts time
zone milliseconds
SERVER_SUPPORT_EXPI
RE_NOTIFY
Off
SERVER_SIP_LOAD_BAL
ANCE_SERVER
SERVER_SMAP_RESERV
E_TIME
Technical support expire
reminder
Load Balancing Server IP
None
SMAP Reserve Duration
seconds None: disable.
SERVER_SOFTSWITCH_
CLUSTER
IP List of Softswitch Cluster
SERVER_SOFTSWITCH_E
NDPOINT_EXPIRE
SERVER_SOFTSWITCH_E
NDPOINT_NAT_EXPIRE
SERVER_SUPPORT_EXPI
RE_NOTIFY
On
Unit: second.
Terminal Registration
Expiry Time
Unit: second.
Terminal Registration
Expiry Time
Technical Support Expire
Reminder
Supplement
Parameter Name
Default Value
Parameter Description
SERVER_TRACE_FILE_L
ENGTH
Size of Debug file
SERVER_TRACE_MASK
ERROR
Set Display of Debug
Information
SERVER_TRACE_TO_FIL
E
On
Output Debug Information
into File
SERVER_VERIFY_CLEAR
ING_CUSTOMER
Off
Check Callee's Phone
Account
On: clearing account’s
balance must over
SERVER_VERIFY_CLEAR
ING_CUSTOMER_REMAI
N_MONEY_LIMIT.
SERVER_VERIFY_CLEAR
ING_CUSTOMER_REMAI
N_MONEY_LIMIT
.
Clearing Account Remain
Money Limit SERVER_VERIFY_CLEAR
ING_CUSTOMER_TIME
Off
If
SERVER_VERIFY_CLEAR
ING_CUSTOMER is on,
Check Clearing Account
Available Time
WEB_PHONEBOOKCALL
BACKACCESSNUMBER_
CARD
Access Number for Web
Directory billing by Phone
Card
WEB_PHONEBOOKCALL
BACKACCESSNUMBER_
PHONE
Access Number for Web
Directory billing by Phone
Number
... Softswitch Parameter
表 - H Parameter
Parameter Name
Default Value
Parameter Description
SS_H_PORT_RANGE
,
H port range
SS_H_DTMF_METHO
D
H. alphanumeric
Default DTMF send mode
SS_H_NUMBERING_P
LAN
UnknownPlan
Default value in Routing
Gateway Additional
settings Protocol H
SS_H_NUMBER_TYPE
UnknownType
Default value in Routing
Gateway Additional
settings Protocol H
Supplement
Parameter Name
Default Value
Parameter Description
SS_H_PROGRESS_IND
ICATOR
ProgressInbandInformationA
vailable
Default value in Mapping
Gateway Additional
settings Protocol H
SS_H_SCREENING_IN
DICATOR
None
Default value in Routing
Gateway Additional
settings Protocol H
SS_H_STOP_SWITCH_
AFTER_OLC
Off
Default value in Routing
Gateway Additional
settings Protocol H
SS_H_TIMEOUT_ALE
RTING
Unit: second.
SS_H_TIMEOUT_CAL
LPROCEEDING
SS_H_TIMEOUT_CAL
LPROCEEDING_OLC
SS_H_TIMEOUT_SET
UP
Default value in Routing
Gateway Additional
settings Protocol H
Unit: second.
Default value in Routing
Gateway Additional
settings Protocol H
Unit: second.
Default value in Routing
Gateway Additional
settings Protocol H
Unit: second.
Default value in Routing
Gateway Additional
settings Protocol H
表 - SIP Parameter
Parameter Name
Default Value
Parameter Description
SS_SIP_AUTHENTICATIO
N_CODE
Unauthorized
Return code for SIP
authentication, when
Register message or Invite
message without
Proxy-Authorization or
Authorization.
SS_SIP_AUTHENTICATIO
N_RETRY
SIP authentication retry time,
when received or
SS_SIP_AUTHENTICATIO
N_TIMEOUT
Time for SIP Authentication
If caller failed to get
authentication within the
time, Softswitch will reject
the call.
Maintenance
Parameter Name
Default Value
Parameter Description
SS_SIP_E_DISPLAY_F
ROM
Ignore
Mode of sip display
information
SS_SIP_NAT_KEEP_ALIV
E_MESSAGE
HELLO
Content of NAT Keep
Message
SS_SIP_NAT_KEEP_ALIV
E_PERIOD
NAT Keep Message's
Period seconds SS_SIP_NAT_KEEP_ALIV
E_SEND_INTERVAL
NAT Keep Message's Send
Interval million seconds
SS_SIP_NAT_KEEP_ALIV
E_SEND_ONE_TIME
NAT Keep Message's
Quantity per Time
SS_SIP_NO_TIMER_REIN
VITE_INTERVAL
Maximum Conversation
Time for Non-TIMER SIP
Caller
If SIP caller doesn't support
"timer", softswitch will stop
the call when the time is up.
SS_SIP_PUBLISH_EXPIRE
Routing gateway public
update timeout default
duration seconds SS_SIP_RESEND_INTERV
AL
.,,,,,,,,,
Resend SIP Message Interval
Second
If got no response or confirm
within the time, Softswitch
will resend SIP message.
If exceeded the retry times,
Softswitch will stop sending
and regard as call failure,
then try another gateway or
hang up.
SS_SIP_ROUTING_GATE
WAY_INVITE_USE_CON
TACT
Off
Use number from
request-line as callee and
keep original number in To
field when send invite to
callee
SS_SIP_SESSION_TIMEO
UT_EARLY_HANGUP
SIP Timer no reinvite
update Early Hang
up Second
Maintenance
Parameter Name
Default Value
Parameter Description
SS_SIP_SESSION_TTL
Detecting SIP Connected
Status Interval Second
If SIP caller supports
"session-timer", within the
time Softswitch will detect
connect status according to
the retry times.
If got no confirm message,
Softswitch will regard as call
finish, then hang up.
SS_SIP_SESSION_UPDAT
E_SEGMENT
SIP Timer reinvite update
Interval - SS_SIP_STOP_SWITCH_A
FTER_SDP
On
Stop Switch Gateway After
Receive SDP
SS_SIP_TIMEOUT_INVIT
E
Unit: second.
SS_SIP_TIMEOUT_RINGI
NG
SS_SIP_TIMEOUT_SESSI
ON_PROGRESS
SS_SIP_TIMEOUT_SESSI
ON_PROGRESS_SDP
SS_SIP_TIMEOUTT_RYIN
G
SS_SIP_USER_AGENT_E
XPIRE
Auto Negotiation
SIP Registration Expiration
Time to Other
Server seconds SS_SIP_USER_AGENT_PR
IVACY
Ignore
Privacy Setting for Register
User
Default value in Routing
Gateway Additional
settings Protocol SIP
Unit: second.
Default value in Routing
Gateway Additional
settings Protocol SIP
Unit: second.
Default value in Routing
Gateway Additional
settings Protocol SIP
Unit: second.
Default value in Routing
Gateway Additional
settings Protocol SIP
Unit: second.
Default value in Routing
Gateway Additional
settings Protocol SIP
Ignore: No Privacy field
Id: contain Privacy: id
None: contain Privacy: none
Supplement
Parameter Name
Default Value
Parameter Description
SS_SIP_USER_AGENT_R
ETRY_DELAY
Resend Interval for SIP
Registration when
Failed Second - SS_SIP_USER_AGENT_SE
ND_UNREGISTER
On
Send Cancel Register
Message
SS_SIP_USER_AGENT_ST
OP_SWITCH_AFTER_INV
ITE_TIMEOUT
Off
Stop Switch Gateway After
INVITE Timeout
Parameter Name
Default Value
Parameter Description
SS_ACCOUNT_INDICATI
ON_METHOD
Off
Insufficient balance alarm
mode
SS_ACCOUNT_INDICATI
ON_MONEY
Insufficient balance alarm
threshold
SS_ACCOUNT_INDICATI
ON_TIME
Insufficient remaining
duration alarm
threshold minutes
SS_AUTHENTICATION_F
AILED_SUSPEND
Disable duration after
exceed max terminal
password authentication
retry times seconds SS_AUTHENTICATION_
MAX_RETRY
Max terminal password
authentication retry times
SS_BLACK_LIST_CALLE
R_CONCURRENT_EXPIR
E
Malicious call dynamic
caller black list expired
duration seconds
SS_BLACK_LIST_CALLE
R_CONCURRENT_LIMIT
None
Malicious call dynamic
caller black list concurrency
limit
SS_BLACK_LIST_CALLE
R_MALICIOUS_CALL_LI
MIT
None
Malicious call dynamic
caller black list max call
times
SS_BLACK_LIST_CALLE
R_MALICIOUS_CALL_CH
ECK_INTERVAL
Malicious call dynamic
caller black list monitor
cycle seconds
SS_BLACK_LIST_CALLE
R_MALICIOUS_CALL_EX
PIRE
Malicious call dynamic
caller black list expired
duration seconds
表 - System Parameter
Maintenance
Parameter Name
Default Value
Parameter Description
SS_BLACK_LIST_MALICI
OUS_CALL_CHECK_INT
ERVAL
Malicious call dynamic
callee black list monitor
cycle seconds
SS_BLACK_LIST_MALICI
OUS_CALL_EXPIRE
Malicious call dynamic
callee black list expired
duration seconds
SS_BLACK_LIST_MALICI
OUS_CALL_LIMIT
None
Malicious call dynamic
callee black list max call
times
SS_BLACK_LIST_NO_AN
SWER_EXPIRE
No answer call dynamic
black list expired
duration days
SS_BLACK_LIST_NO_AN
SWER_LIMIT
None
No answer call dynamic
black list continuous call
times
SS_BLACK_LIST_NO_AN
SWER_PERIODS
No answer call dynamic
black list monitor period
SS_CALLCAPTURERTPP
ORT
Local Port for Call
Monitor Even Number
SS_CALL_FAILED_INDIC
ATION
None
Prompt phone call failed
SS_CALL_FORWARD_US
ING_ORIGINAL_CALLER
On
Use the Original Caller as
Forward Display Number
SS_CALL_HOLD_KEY

Call hold key
SS_CALL_PICK_UP_KEY

Call pickup key
SS_CALL_REMAIN_TIME
INDICATION_BOUNDAR
Y
Time of prompt phone
remaining duration
minutes . During the call, if
remain time less than the
value, system will give
prompt to both side.
SS_CALL_REMAIN_TIME
_INDICATION
Off
Prompt phone remaining
duration
SS_CALL_REPORT_IP
Call state notify address
SS_CALL_REPORT_PORT
Call state notify port
SS_CALL_REPORT_RETR
Y
Call state notify retry times
SS_CALL_REPORT_RETR
Y_INTERVAL
Call state notify retry
interval
Maintenance
Parameter Name
Default Value
Parameter Description
SS_CALL_SERVICE_CAN
CEL_KEY

Call transfer cancel key
SS_CALL_STATE_REPOR
T
Off
Http call status notification
SS_CALL_TRANSFER_AS
K_DISPLAY
Original caller
Ask call transfer display
SS_CALL_TRANSFER_AS
K_KEY

The inquisitorial call transfer
start key
SS_CALL_TRANSFER_CA
NCEL_KEY

Call transfer cancel key
SS_CALL_TRANSFER_EN
D_KEY
Confirm button for call
transfer
SS_CALL_TRANSFER_N
ORMAL_KEY

Start button for call transfer
SS_CALL_TRANSFER_RE
MOTE_RING_PASS_THR
OUGH
On
Send color ring back tone
when call transfer
SS_CALL_TRANSFER_W
AIT_ACCESS_KEY

The pickup call transfer start
key
SS_CALL_TRANSFER_W
AIT_ACCESS_TIMEOUT
Pickup call transfer timeout
seconds
SS_CDR_RECORD_ILLEG
AL
On
Record illegal call
SS_CDR_RECORD_NONC
ONNECT
Off
When saving CDR as TXT,
contains CDR, which hold
time is s
SS_CDR_RECORD_TO_FI
LE
Off
Save CDR as TXT
SS_CALL_TRANSFER_N
ORMAL_DISPLAY
SS_DEFAULT_LOCAL_IP
Default Local Address
SS_DTMF_TIMEOUT
Waiting time for Automatic
Call Transfer
SS_ENDPOINT_EXPIRE
Terminal register expire time
SS_ENDPOINT_REGISTE
R_REPLACE
On
Allow replace the current
registered users when
terminal registration.
SS_ENDPOINT_EXPIRE
Terminal registration expiry
time seconds Maintenance
Parameter Name
Default Value
Parameter Description
SS_ENDPOINT_NAT_EXP
IRE
Terminal registration expiry
time seconds SS_ENDPOINT_REGISTE
R_REPLACE
On
Allow replace the current
registered users when
terminal registration
SS_ENDPOINTREGISTER
RETRY
Max retry times when
terminal registration
SS_EXTERNAL_REWRIT
E_TYPE
None
External rewrite method
SS_ENDPOINTREGISTER
SUSPEND
Disable duration after
exceed retry times for when
terminal registration
SS_ENDPOINTTIMETOLI
VE
Interval for Lightweight
Registration of
Terminal seconds
SS_GATEWAY_ACD_CA
LCULATE
Off
External rewrite method
SS_GATEWAY_ACD_RES
ERVE_SEPARATE
Section for gateway's acd
routing calculated as the step
size SS_GATEWAY_ACD_RES
ERVE_TIME
Length for gateway's acd
routing seconds SS_GATEWAY_ASR_CAL
CULATE
Off
Real time computing asr
SS_GATEWAY_ASR_RES
ERVE_SEPARATE
Section for gateway's asr
routing calculated as the step
size SS_GATEWAY_ASR_RES
ERVE_TIME
Length for gateway's asr
routing seconds SS_GATEWAY_ASR_ROU
TE_SORT_CONFIG
Before line usage
Position for routing
gateway's asr routing
SS_GATEWAY_FEE_RAT
E_ROUTE_BEFORE_ASR
Off
Rate routing priority over asr
routing
SS_GATEWAY_FEE_RAT
E_ROUTE_SORT_CONFIG
Before line usage
Position for routing
gateway's rate routing
SS_GATEWAY_SWITCH_
LIMIT
None
Times limit for Routing
Gateway Auto-Switch
SS_GATEWAY_SWITCH_
STOP_AFTER_RTP_STAR
T
On
Stop Switch Gateway when
RTP Start
Maintenance
Parameter Name
Default Value
Parameter Description
SS_GATEWAY_SWITCH_
STOP_AFTER_USER_BUS
Y
On
Callee busy stop switch
SS_GATEWAY_SWITCH_
UNTIL_CONNECT
Off
Switch Gateway Until
Connect
SS_GC_INTERVAL
Interval for Clean Useless
Data of Softswitch seconds
SS_LOCAL_RING_DEFAU
LT
localring
Default local ring
SS_LRN_SERVER_IP
Lrn server ip
SS_LRN_SERVER_PORT
Lrn server port SS_MAPPING_GATEWAY
_TIMEOUT
None
Mapping Gateway Default
Timeout
SS_MAX_CALL_DURATI
ON
None
Max Conversation
Limitation seconds
SS_MEDIA_CHECK_TIME
OUT
No Media Data Hang Up
Duration minutes
SS_MEDIA_PROXY_BEHI
ND_NAT
On
Forward RTP for Registered
Terminals behind NAT
SS_MEDIA_PROXY_BET
WEEN_NET
Off
Forward RTP for Calls
between Different Networks
SS_MEDIA_PROXY_MOD
E
Auto
Media Proxy
SS_MEDIA_PROXY_POR
T_RANGE
,
RTP Port for Forwarding
Voice, use Comma to
Separate the Start and End
port
SS_MEDIA_PROXY_SAM
E_NAT
On
Forward RTP for Registered
Terminals in the same NAT
SS_MOBILE_E_LENG
TH
Length limit for Mobile
Number separated by
commas Maximum ,
uses for allow all the
length
SS_NON_STANDARD_PR
EFIX
Non standard e prefix,
separated by commas.
SS_NO_BILLING_TO_PH
ONE
Off
Free billing to phone
SS_PHONE_ONLINE_REP
ORT
Off
Interface: phone
online/offline notice
Maintenance
Parameter Name
Default Value
SS_PHONE_SERVICE_IP
Parameter Description
Phone service ip
SS_PHONE_SERVICE_PO
RT
Phone service port SS_REDIRECT_OFFLINE_
PHONE_TO_GATEWAY
Off
If phone is offline, try to use
routing gateway for routing.
SS_REDIRECT_SERVER
External billing and routing
control redirect server
address Sip xx
SS_REDIRECT_SERVER_
AVAILABLE_TO_PHONE
Off
External billing and routing
control also take effect when
callee is phone
SS_REPLY_UNAUTHORI
ZED
On
Respond to Unauthorized
Registration or Call
SS_RTP_ENCRYPT_V
XOR,RC,AES
Version rtp encryption
algorithm
XOR,RC,AES
SS_SELF_SERVICE_URL
Phone self service url
SS_TCP_CLOSE_RESET
Off
Close TCP connection in
Direct Reset mode.
SS_TIMEOUT_CALL_FOR
WARD_NO_ANSWER
Time for Call Forwarding,
When No Reply seconds
SS_TIMEOUT_PHONE_N
O_ANSWER
Time for Hang Up, When
No Reply seconds
SS_TRACE_CALL_FILE_S
IZE
Call signaling trace file size
limit MB SS_TRACE_FILE_LENGT
H
Size of Softswitch's Debug
File KB
SS_TRACE_MASK
ERROR
Set Display of Debug
Information
SS_TRACE_REGISTER_FI
LE_SIZE
Registration signaling trace
file size limit MB SS_TRACE_REGISTER_M
AX_TRANSMIT
Registration Track
Maximum Data Size MB
SS_TRY_PROTECT_ROU
TE_DELAY
None
Protect rout enable time
seconds SS_TRACETOFILE
On
Output Debug Information
into File
Supplement
Parameter Name
Default Value
Parameter Description
SS_UNBOUND_INDICATI
ON
Off
Prompt whether the Phone
Card is Binded
SS_USE_CALLER_PHONE
_DISPLAY
Off
SS_USE_CALLER_PHONE
_DISPLAY
SS_VALUE_ADDED_COD
ECS
ga,g,g,ga,g
u
Audio codecs prior to value
added
ga,g,g,ga,g
u
SS_VALUE_ADDED_IP
SS_VALUE_ADDED_POR
T
Value Added Server IP
SS_VIRTUAL_IPS
Value Added Server Port
DMZ Settings
... Audio Service Parameter
Parameter Name
Default Value
Parameter Description
IVR_CALLBACK_KEEP_L
INE_RING_TIME
Alerting time for callback
caller reservation IVR_CALLBACK_KEEP_L
INE_TIME
Used for callback line keep.
See
IVR_CALLBACK_KEEP_L
INE_RING_TIME
IVR_CALL_REPORT_IP
Send IVR second line’s call
state. UDP request format:
Call ID, Serial Number, Call
State, Caller Number, Callee
Number, Forward Number,
Menu ID, Menu Name.
Response format: Call ID,
Serial Number.
Call State:
Ringing / /OK/Bye
IVR_CALL_REPORT_POR
T
Report UDP Port
IVR_CALL_REPORT_RET
RY
Call State Notify Retry
Times
IVR_CALL_REPORT_RET
RY_INTERVAL
Call State Notify Retry
Interval
IVR_CODEC_PRIORITY
ga,g,g,ga,g
u
Voice Codecs Priority
ga,g,g,ga,g
u
Supplement
IVR_DEFAULT_ERROR_
AUDIO
defaulterror
Default Error Message
Voice
IVR_DEFAULT_LANGUA
GE
chinese
Use Default Language when
IVR don't know Client's
Language
IVR_ENABLE_CARD_LIN
E_RESTRICT
On
Each Phone Card cannot use
IVR service at the same
time.
IVR_ENABLE_PARSE_IN
BAND
Off
Inband DTMF Analysis
IVR_ENABLE_PARSE_SE
COND_INBAND
Off
Second Line Inband DTMF
Analysis
IVR_MEDIA_CHECK_TIM
E_OUT
No media data hang up
duration minutes IVR_PARSE_DTMF_MOD
E
Auto
DTMF Analysis Mode
IVR_RESERVE_CALL_KE
EP_TIME
Reservation callee number
keep time seconds IVR_RINGING_TIMEOUT
Time for IVR Hang Up,
When No Reply seconds
IVR_RTP_PORT
,
Media Port Range
IVR_SETUP_TIMEOUT
Invite Timeout Duration
IVR_SHORTE_AUTO_
RECORD_ENABLE
Off
Auto Save Number Function
IVR_SHORTE_AUTOR
ECORD_LENGTH
Auto Save Number Suffix
IVR_SHORTE_AUTOR
ECORD_MAX_NUMBER
Auto Save Number Amount
IVR_SIP_NO_TIMER_MA
X_SESSION_TIME
Maximum Conversation
Time for Non-Timer SIP
Caller
IVR_SIP_RESEND_INTER
VAL
Interval for Resend SIP
Message seconds
IVR_SIP_SEND_RETRY
Times of Resend SIP
Message
IVR_SIP_SESSION_RETR
Y
Retry Times for Detecting
SIP Connected Status
IVR_SIP_SESSION_TTL
Interval for Detecting SIP
Connected Status seconds
IVR_SOFTSWITCH_IP
IP of Softswitch
Supplement
IVR_SOFTSWITCH_SIP_P
ORT
IVR_SOFTSWITCH_AVAI
LABLE_IP
Port of SIP Softswitch
Access IP List, separated by
commas
IVR_TRACE_FILE_SIZE
Size of Softswitch’s Debug
File KB IVR_TRACE_MASK
ERROR
Set Display of Debug
Information
IVR_TRACE_TO_FILE
On
Output Debug Information
into File
IVR_WEB_CALLBACK_S
AME_TIME_CODEC
ga
Codec for Call Both Side
IVR_ALARM_CALLER_E
Voice Alarm Caller Number
IVR_ALARM_CONFIRM_
KEY
Voice Alarm Confirm Key
IVR_ALARM_PERIOD
Voice Alarm
Period minutes
IVR_ALARM_PRE_AUDI
O
alarmpreaudio
Voice Alarm Pre-Prompt
Audio
IVR_ALARM_RETRY
Voice Alarm Retry Times
IVR_ALARM_RETRY_IN
TERVAL
Voice Alarm Retry Interval
IVR_VOICEMAIL_EXPIR
E_DAY
Voice Mail Preservation
Days
IVR_VOICEMAIL_MAX_
NUMBER
Voice Mail Max Items
IVR_VOICEMAIL_MAX_
TIME
Voice Mail Recording
Length seconds
IVR_VOICEMAILWELCO
ME
voicemailwelcome
Default Audio for Voice
Mail Access
Supplement
. Softswitch Recorded CDR File In Txt
When the softswitch’s parameter SS_CDRRECORDTOFILE is set to On, the softswitch
will record cdr into txt file in the directory cdr beneath the installation directory.
The format of the cdr file name will be YYYYMMDDHH.txt YYYY-year, MM-month,
DD-day, HH-hour .
The softswitch will generate one cdr file per hour, as .txt will record the the cdrs
that end between -- : and -- :.
Each line represents one cdr in the txt file. The format is tabled as below:
callerE |calleeE |startTime |stopTime |holdTime |endReason |endDirection
|callerGatewayId |calleeGatewayId |callerIp |calleeIp |callerAccessE |calleeAccessE
|callerToGatewayE |calleeToGatewayE |calleeBilling |billingMode |callerPdd
|calleePdd
segment
description
callerE
The caller id
calleeE
The callee id
startTime
Begin time, as -- ::
stopTime
End time, as -- ::
holdTime
Call durarion(in milliseconds)
endReason
End reason
endDirection
Hangup side(-caller,-callee,-server)
callerGatewayId
Calling gateway
calleeGatewayId
Called gateway
callerIp
Caller ip
calleeIp
Callee ip
callerAccessE
Incoming caller
calleeAccessE
Incoming callee
callerOutE
Outbound caller
Supplement
calleeOutE
Outbound callee
calleeBilling
Billing method(-By caller,-By callee)
billingMode
Charge mode(--bobilling,-phone number,
-gateway ID,-phone card)
callerPdd
time elapsed from call received to call connected
calleePdd
time elapsed from call sent to routing response
Supplement
. Call End Reason
.. Server Side
Terminations caused by the server are all defined by VOS3000 V2.1.8.0. For any questions related to
this kind of causes, please consult your system supplier.
Following are the causes of this kind:
Response timeout: the called did not answer the phone before the timeout limit was
reached. The timeout limit can be set either by the Alerting signal of Routing Gateway
when the call is processed through Routing Gateway or by the
SS_TIMEOUT_PHONE_HANGUP parameter in the Softswitch system when the call
is directed to a phone
Protocol limit: the server cannot process this type of protocol
Connection timeout: No response to the SIP message was received after specified
number of trials. The maximal number of trials can be specified by the
SS_SIP_RESEND_INTERVAL and SS_SIP_SEND_RETRY parameters in the
Softswitch system.
Busy: the number being called is busy.
Account locked: the account is disabled. It may also due to the lockdown of its agent
account.
Session timeout: the caller or the called supports the SIP Timer protocol, yet it has not
received the updating signal within a time limit; or, neither does the caller nor the called
support the SIP Timer protocol, yet the session time exceeded the value specified by the
system parameter
SS_SIP_NO_TIMER_REINVITE_INTERVAL .
Called number restricted: the length of the called number exceeds the length specified by
the system parameter SS_CALLERALLOWLENGTH .
Proceeding timeout: No response is received from the server within the time limit. The
time limit can be specified by the Setup and Callproceeding parameters in the
routing gateway.
Caller’s number prefix restricted: the mapping gateway does not accept the caller’s
number prefix.
Unregistered: the terminal is not register, and is not allowed to make the call.
Called number locked: the called is currently locked.
Called number prefix restricted: the gateway for the caller or the called gateway does not
accept the called number prefix.
Caller locked: the caller is currently locked.
Connection establishment timeout: the connection is not established within the timeout
limit set by the mapping gateway. The time limit can be changed by setting the
proceeding timeout parameter in the mapping gateway.
Account expired: the account is expired.
Caller’s number restricted: the length of the caller’s number exceeds the length specified
by the system parameter SS_CALLERALLOWLENGTH .
Supplement
Connection limit exceeded: the maximum number of outgoing calls is reached. The
maximum number can be specified in the system.
Forcible hang-up: the server disconnected the session, usually because the client chose to
end the session in their user interface.
Account disabled: the account is currently disabled. Please check the status of the
account it belongs to.
The called not online: There is no appropriate device to accept this call. For example,
there is no matching routing gateway.
No-answer forwarding by the caller: the caller has set the no-answer forwarding
On-busy forwarding: the call matches the on-busy forwarding criteria specified in the
phone management settings.
No-answer forwarding by the called: the call matches the no-answer forwarding criteria
specified in the phone management settings.
Forwarding loop: Due to the wrong configuration of users, the forwarding route has
loops.
Call forwarding by the called: the call matches the call forwarding criteria specified in
the phone management settings.
Do-not-disturb from the called: the called is in the do-not-disturb status
Session closed by the called: the called did not send the hang-up signal, but disconnected
the TCP connection
Session closed by the caller: the caller did not send the hang-up signal, but disconnected
the TCP connection
Illegal call: the call comes from an unauthorized IP address and the caller’s number is
not registered in the system.
No matching rate: There is no rate that matches this call.
Insufficient balance: the account has insufficient balance
Hang-up by the called: the hang-up signal comes from the called.
Timed forwarding: the call matches the timed forwarding criteria specified in the phone
management settings.
No matching account: There is no account to bill this call.
Call restriction: the call is prevented by restrictions such as International call set by
the phone or the gateway.
Hang-up by the caller: the hang-up signal comes from the caller.
.. Client Side
... H Device
UnknownCauseIE
UnallocatedNumber
NoRouteToNetwork
NoRouteToDestination
SendSpecialTone
Supplement
MisdialledTrunkPrefix
ChannelUnacceptable
CallAwarded
Preemption
PreemptionCircuitReserved
NormalCallClearing
UserBusy
NoResponse
NoAnswer
SubscriberAbsent
CallRejected
NumberChanged
Redirection
ExchangeRoutingError
NonSelectedUserClearing
DestinationOutOfOrder
InvalidNumberFormat
FacilityRejected
StatusEnquiryResponse
NormalUnspecified
NoCircuitChannelAvailable
CallQueued
NetworkOutOfOrder
FrameModeOOS
FrameModeOperational
TemporaryFailure
Congestion
AccessInformationDiscarded
RequestedCircuitNotAvailable
PrecedenceCallBlocked
ResourceUnavailable
QoSNotAvailable
RequestedFacilityNotSubscribed
Supplement
OutgoingCallsBarred
OutgoingCallsBarredInCUG
IncomingCallsBarred
IncomingCallsBarredInCUG
BearerCapNotAuthorised
BearerCapNotPresentlyAvailable
InconsistentOutgoingIE
ServiceOptionNotAvailable
BearerCapNotImplemented
ChannelTypeNotImplemented
RequestedFacilityNotImplemented
OnlyRestrictedDigitalBearerCapAvailable
ServiceOrOptionNotImplemented
InvalidCallReference
IdentifiedChannelNonExistent
CallIdentifyNotSuspendedCall
CallIdentifyInUse
NoCallSuspended
ClearedRequestedCallIdentity
UserNotInCUG
IncompatibleDestination
NonexistentCUG
InvalidTransitNetwork
InvalidMessageUnspecified
MandatoryIEMissing
MessageTypeNonexistent
MessageNotCompatible
IENonExistantOrNotImplemented
InvalidIE
MessageNotCompatibleWithCallState
TimerExpiry
ParameterNonexistent
UnrecognisedParamaterDiscarded
Supplement
ProtocolErrorUnspecified
InterworkingUnspecified
ErrorInCauseIE
... SIP Device
Multiple Choices
Moved Permanently
Moved Temporarily
Use Proxy
Alternative Service
Bad Request
Unauthorized
Payment Required
Forbidden
Not Found
Method not Allowed
Not Acceptable
Proxy authentication Required
Request Timeout
Gone
Request Entity Too Large
Request-URI Too Long
Unsupported Media Type
Unsupported URI Scheme
Bad Extension
Extension Required
Session Interval Too Small
Interval Too Brief
Temporarily Unavailable
Call |Transaction Does not Exist
Loop Detected
Too Many Hops
Address Incomplete
Ambiguous
Supplement
Busy Here
Request Terminated
Not Acceptable Here
Request Pending
Server Internal Error
Not Implemented
Bad Gateway
Service Unavailable
Server Time-out
Version not Supported
Message Too Large
Busy Everywhere
Decline
Does not Exist Anywhere
Not Acceptable
Supplement
. First Usage
.. Whole Sales
Operation
Create Fee Rate Group
Create Mapping Gateway
Customer IP: ...
Create Fee Rate
Create Account
Create Routing Gateway
Example
Routing Gateway IP: ...
Double click Navigation Rate management , add rate group . and apply.
Double click Number of rates to add fee rate.
Double click Navigation Account management , add account test and apply.
Double click Number of gateway to add mapping gateway.
Double click Navigation Routing gateway , add routing gateway caller. and apply.
Supplement
After configuration, ask customer to send SIP call, then open Navigation Data query
Cdr to see call result.
Maintenance
Maintenance
About This Chapter
This chapter describes the maintenance of VOS3000 V2.1.8.0 solutions.
If one server deployed multiple services, should start and stop in the following order.
Service Start
/etc/init.d/VOS3000 V2.1.8.0d start
/etc/init.d/mgc start
/etc/init.d/empd start
/etc/init.d/mediaagentd start
/etc/init.d/callserviced start
/etc/init.d/mbxd start
/etc/init.d/webdatad start
/etc/init.d/webserverd start
/etc/init.d/diald start
/etc/init.d/ipcentrexd start
/etc/init.d/valueaddedd start
/etc/init.d/audioplayerd start
/etc/init.d/servermonitord start
Maintenance
Service Stop
Note: actually, service stop sequence is the reverse order of service start
/etc/init.d/servermonitord stop
/etc/init.d/audioplayerd stop
/etc/init.d/valueaddedd stop
/etc/init.d/VOS3000 V2.1.8.0d stop
Master Server Lock

/etc/init.d/masterslaved lock